基于时空分析的贫困丘陵山区耕地变化机理研究

在地理信息系统技术的支持下 ,利用耕地面积变化时间序列模型、耕地动态度模型、耕地重心变化模型等 ,对湖北省咸宁市耕地的时间变化和空间变化特征进行了定量的研究 ,并应用主成分分析法 ,选择 2 3个因素对其驱动因子进行了相关分析。结果表明 ,耕地变化主要受经济因子、人口、房地产政策及耕地开发强度的影响     

Long-term bed load transport rate based on aerial-photo and ground penetrating radar surveys of fan-delta growth, Coast Mountains, British Columbia

Sequential aerial photography, sonar bathymetry, ground-penetrating radar (GPR), and sediment sampling and analysis provide the basis for calculating the volumetric and mass rate of progradation of the delta of Fitzsimmons Creek, a steep, high-energy, debris-flow-dominated channel draining about 100 km² of the southern Coast Mountains of British Columbia. Fitzsimmons Creek is typical of small mountain rivers in the region. GPR imaging is used to define the pre-depositional morphology of the receiving basin, a technique that improves the accuracy of the volumetric survey. The 52-year record (1947–1999) of progradation yielded an average annual volumetric transport rate of 1.00±0.16×10⁴ m³ year⁻¹ for bed load, corresponding to a mass transport rate of 1.60±0.28×10⁴ Mg year⁻¹. Bed load yields are consistent with those obtained in hydrogeomorphically similar basins in the region and elsewhere. Decade-based annual rates, which vary from 0.64±0.11×10⁴ to 2.85±0.38×10⁴ Mg year⁻¹, provide poor estimates of the 52-year average. Indeed, the 52-year record may also not be long enough to fully integrate the significant fluctuations in the sediment efflux from Fitzsimmons Creek. The methodology proposed in this paper can be transferred to other comparable mountain environments worldwide.     

The effect of bed mobility on resistance to overland flow

When sediment grains are transported as bed load in overland flow, there is a net transfer of momentum from the flow to the grains. When these grains collide with other grains, whether on the bed or in the flow, streamwise flow velocity decreases and resistance to flow increases. Resistance to flow generated in this manner is termed bed‐load transport resistance. Resistance to flow f over a plane bed may be partitioned into grain resistance f_g and bed‐load transport resistance f_bt. We use the symbols f_btf and f_btm to denote f_bt for flows over fixed beds and over mobile beds, respectively, and we compute the effect of bed mobility on flow resistance f_mob by subtracting f_btf from f_btm. The data for this study come from 54 flume experiments with fixed beds and 38 with mobile beds. On average f_mob is approximately equal to half of f_btm, which is about one‐quarter of f. Hence, f_mob is about one‐tenth of f. Predictive equations are developed for f_btf, f_btm and f_mob using dimensional analysis to identify the relevant independent variables and regression analysis to evaluate the coefficients associated with these variables. Values of f_mob are always positive which implies that mobile beds offer greater resistance to flow than do fixed beds. Evidently bed‐load grains colliding with mobile beds lose more momentum to the bed than do grains colliding with fixed beds. In other words, grain collisions with mobile beds are less elastic than those with fixed beds. Copyright © 2005 John Wiley & Sons, Ltd.     

Green''''s functions for uniformly distributed loads acting on an inclined line in a poroelastic layered site

Based on one type of practical Biot's equation and the dynamic-stiffness matrices of a poroelastic soil layer and half-space, Green's functions were derived for uniformly distributed loads acting on an inclined line in a poroelastic layered site. This analysis overcomes significant problems in wave scattering due to local soil conditions and dynamic soil-structure interaction. The Green's functions can be reduced to the case of an elastic layered site developed by Wolf in 1985. Parametric studies are then carried out through two example problems.     

SEDIMENT TRANSPORT, DELTA GROWTH AND SEDIMENTATION IN LAKE NIGARDSVATN, NORWAY

ABSTRACT. The retreat of Nigardsbreen, an outlet glacier from the ice-cap Jostedalsbreen in south-central Norway, from its largest extent during the Little Ice Age, uncovered a proglacial lake during 1936–1967. This lake, Nigardsvatn, has been studied since 1968 in order to obtain data on solid material carried by the meltwater stream from the glacier, both in suspension and as bottom load. Between 70 and 85% of the suspended sediment has been deposited on the lake bottom, forming annual varves. The coarse material has been deposited in a delta, the formation of which started in 1968. Its growth, and hence the volume of total annual bottom load, has been surveyed annually for the past 36 years. In 1969 the entire bottom load was collected by building a fence-like net across the river. Material >3 cm was caught by this net, and formed approximately half the amount of suspended sediment transport during the same three-week period. Annual average deposition on the delta was 11800×10³ kg for the period 1968–2003. This is almost the same amount as carried in suspension from the glacier on an annual mean basis for the 36-year period. If conditions remain constant, the lake will be completely filled in about 500 years. The glacier erosion is calculated to be 0.3 mm/a.     

沉降-时间曲线呈“S”型的证明及其应用——从土体本构关系

从土体本构关系出发,严格证明了在线性加载或近似线性加载情况下(这和岩土工程实际加载相类似),沉降-时间曲线呈“S”型,并由此建立了新的沉降-时间预测模型,工程应用证明了该模型的合理性。     

Proof of settlement-time curve appearing “S” shape with ramp load and its application base on stress-strain relationship

Based on stress-strain relationship of soil, the proof is made for that s-t curve appears “S” shape when the load is increased linearly, which is similar to construction process. A new model of forecasting the relation of settlement-time is presented. Case history shows the rationality of the method.     

Temporal and spatial variations in water flow and sediment load in Narmada River Basin, India: natural and man-made factors

The Narmada River flows through the Deccan volcanics and transports water and sediments to the adjacent Arabian Sea. In a first-ever attempt, spatial and temporal (annual, seasonal, monthly and daily) variations in water discharge and sediment loads of Narmada River and its tributaries and the probable causes for these variations are discussed. The study has been carried out with data from twenty-two years of daily water discharge at nineteen locations and sediment concentrations data at fourteen locations in the entire Narmada River Basin. Water flow in the river is a major factor influencing sediment loads in the river. The monsoon season, which accounts for 85 to 95% of total annual rainfall in the basin, is the main source of water flow in the river. Almost 85 to 98% of annual sediment loads in the river are transported during the monsoon season (June to November). The average annual sediment flux to the Arabian Sea at Garudeshwar (farthest downstream location) is 34.29×10⁶ t year⁻¹ with a water discharge of 23.57 km³ year⁻¹. These numbers are the latest and revised estimates for Narmada River. Water flow in the river is influenced by rainfall, catchment area and groundwater inputs, whereas rainfall intensity, geology/soil characteristics of the catchment area and presence of reservoirs/dams play a major role in sediment discharge. The largest dam in the basin, namely Sardar Sarovar Dam, traps almost 60–80% of sediments carried by the river before it reaches the Arabian Sea.     

Snow loads on wire mesh and cable net rockfall slope protection systems

Snow load on mesh systems is complicated by many factors. This paper presents field instrumentation data on snow load variation with temperature, snowfall and snow depth on a mesh system. It was found that snow load pattern on mesh systems changed with temperature even without variation in snow depth. It reached its maximum value when the temperature rose just above freezing to melt the interface. The field data was used to formulate appropriate snow load models for the various conditions of temperature in the field. The snow load models were used to study the performance of a number of mesh systems in North America and estimate the interface friction that was prevalent for the different surface conditions.     

One-dimensional consolidation of soil under multistage load based on continuous drainage boundary

In engineering practice, a rapid loading rate can result in ground failure when the strength of soft soils is relatively low, and a multistage loading scheme is always utilized to deal with this situation. Firstly, under a multistage load and the continuous drainage boundary, an analytical solution of excess pore-water pressure and consolidation degree is obtained by virtue of the superposition formula of excess pore-water pressure, and a more general continuous drainage boundary under arbitrary time-dependent load is developed. Then, a comparison with existing analytical solutions is conducted to verify the present solution. A preliminary attempt on applying the continuous drainage boundary into the finite element model is made, and the feasibility of the numerical model for the one-dimensional consolidation under the continuous drainage boundary is verified by comparing the results calculated by FEM with that from present analytical solution. Finally, the consolidation behavior of soil is investigated in detail for different int erface parameters or loading scheme. The results show that, in land reclamation projects, a horizontal drain should be placed close to the boundary with a smaller interface parameter to improve the consolidation efficiency. The degree of consolidation is also related to the applied time-dependent load and interface parameters.