Discriminating between pore‐filling load and bed‐structure load: a new porosity‐based method,exemplified for the river Rhine

Sediments contained in the river bed do not necessarily contribute to morphological change. The finest part of the sediment mixture often fills the pores between the larger grains and can be removed without causing a drop in bed level. The discrimination between pore‐filling load and bed‐structure load, therefore, is of practical importance for morphological predictions. In this study, a new method is proposed to estimate the cut‐off grain size that forms the boundary between pore‐filling load and bed‐structure load. The method evaluates the pore structure of the river bed geometrically. Only detailed grain‐size distributions of the river bed are required as input to the method. A preliminary validation shows that the calculated porosity and cut‐off size values agree well with experimental data. Application of the new cut‐off size method to the river Rhine demonstrates that the estimated cut‐off size decreases in a downstream direction from about 2 to 0·05 mm, covariant with the downstream fining of bed sediments. Grain size fractions that are pore‐filling load in the upstream part of the river thus gradually become bed‐structure load in the downstream part. The estimated (mass) percentage of pore‐filling load in the river bed ranges from 0% in areas with a unimodal river bed, to about 22% in reaches with a bimodal sand‐gravel bed. The estimated bed porosity varies between 0·15 and 0·35, which is considerably less than the often‐used standard value of 0·40. The predicted cut‐off size between pore‐filling load and bed‐structure load (D_c,p) is fundamentally different from the cut‐off size between wash‐load and bed‐material load (D_c,w), irrespective of the method used to determine D_c,p or D_c,w. D_c,w values are in the order of 10^?1 mm and mainly dependent on the flow characteristics, whereas D_c,p values are generally much larger (about 10⁰ mm in gravel‐bed rivers) and dependent on the bed composition. Knowledge of D_c,w is important for the prediction of the total sediment transport in a river (including suspended fines that do not interact with the bed), whereas knowledge of D_c,p helps to improve morphological predictions, especially if spatial variations in D_c,p are taken into account. An alternative to using a spatially variable value of D_c,p in morphological models is to use a spatially variable bed porosity, which can also be predicted with the new method. In addition to the morphological benefits, the new method also has sedimentological applications. The possibility to determine quickly whether a sediment mixture is clast‐supported or matrix‐supported may help to better understand downstream fining trends, sediment entrainment thresholds and variations in hydraulic conductivity.     

Sedimentary evolution of a Late Pleistocene temperate red algal reef (Coralligène) on Rhodes,Greece: correlation with global sea‐level fluctuations

Autochthonous red algal structures known as coralligène de plateau occur in the modern warm‐temperate Mediterranean Sea at water depths from 20 to 120 m, but fossil counterparts are not so well‐known. This study describes, from an uplifted coastal section at Plimiri on the island of Rhodes, a 450 m long by 10 m thick Late Pleistocene red algal reef (Coralligène Facies), interpreted as being a coralligène de plateau, and its associated deposits. The Coralligène Facies, constructed mainly by Lithophyllum and Titanoderma, sits unconformably upon the Plio‐Pleistocene Rhodes Formation and is overlain by a Maerl Facies (2 m), a Mixed Siliciclastic‐Carbonate Facies (0·2 m) and an Aeolian Sand Facies (2·5 m). The three calcareous facies, of Heterozoan character, are correlated with established members in the Lindos Acropolis Formation in the north of the island, while the aeolian facies is assigned to the new Plimiri Aeolianite Formation. The palaeoenvironmental and genetic‐stratigraphic interpretations of these mixed siliciclastic‐carbonate temperate water deposits involved consideration of certain characteristics associated with siliciclastic shelf and tropical carbonate shelf models, such as vertical grain‐size trends and the stratigraphic position of zooxanthellate coral growths. Integration of these results with electron spin resonance dates of bivalve shells indicates that the Coralligène Facies was deposited during Marine Isotope Stage 6 to 5e transgressive event (ca 135 to 120 ka), in water depths of 20 to 50 m, and the overlying Maerl Facies was deposited during regression from Marine Isotope Stage 5e to 5d (ca 120 to 110 ka), at water depths of 25 to 40 m. The capping Aeolian Sand Facies, involving dual terrestrial subunits, is interpreted as having formed during each of the glacial intervals Marine Isotope Stages 4 (71 to 59 ka) and 2 (24 to 12 ka), with soil formation during the subsequent interglacial periods of Marine Isotope Stages 3 and 1, respectively. Accumulation rates of about 0·7 mm year^?1 are estimated for the Coralligène Facies and minimum accumulation rates of 0·2 mm year^?1 are estimated for the Maerl Facies. The existence of older red algal reefs in the Plimiri region during at least Marine Isotope Stages 7 (245 to 186 ka) and 9 (339 to 303 ka) is inferred from the occurrence of reworked coralligène‐type lithoclasts in the basal part of the section and from the electron spin resonance ages of transported bivalve shells.     

Palaeoenvironmental significance of Late Permian palaeosols in the South‐Eastern Iberian Ranges,Spain

The Late Permian (Wuchiapingian) Alcotas Formation in the SE Iberian Ranges consists of one red alluvial succession where abundant soil profiles developed. Detailed petrographical and sedimentological studies in seven sections of the Alcotas Formation allow six different types of palaeosols, with distinctive characteristics and different palaeogeographical distribution, to be distinguished throughout the South‐eastern Iberian Basin. These characteristics are, in turn, related to topographic, climatic and tectonic controls. The vertical distribution of the palaeosols is used to differentiate the formation in three parts from bottom to top showing both drastic and gradual vertical upwards palaeoenvironmental changes in the sections. Reconstruction of palaeoenvironmental conditions based on palaeosols provides evidence for understanding the events that occurred during the Late Permian, some few millions of years before the well‐known Permian‐Triassic global crisis.     

Carbonate aeolianites of western Saurashtra,India: experimental decipherment of the depositional mechanisms

Granular carbonate deposits of Late Pleistocene to Early Holocene age, commonly referred to as ‘miliolite limestone’, occur in a linear belt, parallel to the southern coast of Saurashtra, India. In the present study area these carbonate deposits are found in select valleys between ridges and mounds of pyroclastic material present in the Deccan trap plateau. Two different depositional histories have been proposed for these sediments. The presence of marine bioclasts led to the postulation of a marine origin for these deposits. The second school of thought propounded redeposition of the coastal sediments by aeolian processes. Although a few features could not be explained by the proposed aeolian model, critical comparison of these two views favoured the aeolian origin. The mode of occurrence, lithological and structural attributes, and microscopic evidence presented here, also support a possible aeolian origin for these deposits. Experimental observation indicates that these carbonate aeolianites represent backflow deposits, which accumulated because of the flow separation caused by the presence of topographic highs. The conspicuous concave‐up geometry of the deposit conformed to the shape of the separation bulb. In view of the inferred depositional mechanism, the disposition of the deposits and the signature of the palaeoflow direction suggest that the carbonate particles were derived from the north‐western coast of Saurashtra by strong south‐easterly winds. Massive granular carbonates with outsized basement clasts appear to be the product of avalanching of granular material from the higher contours because of oversteepening of the primary deposit.     

华北地台东部石炭系—二叠系优质煤储层形成分布控制因素

优质煤储层在此指厚度大、分布广、储集物性好的煤层。沉积相对优质煤储层的形成和分布有重要控制作用。通过浅海和泻湖淤积填平发育起来的潮坪环境和三角洲环境是最有利的优质煤储层形成环境,煤储层厚度大、分布广。沉积环境对煤储层中的灰分含量和镜质组含量有重要影响,而灰分含量和镜质组含量又直接影响煤储层的储集物性。灰分充填了煤储层中的孔隙,其含量越高,储集物性越差;镜质组有利于割理的形成,其含量越高,储集物性越好。由于在灰分含量、煤岩显微组分等方面的差异,潮坪环境沉积的煤储层的储集物性优于三角洲的煤储层,下三角洲平原沉积的煤储层优于上三角洲平原沉积的煤储层。海平面变化对优质煤储层的形成和分布也有重要控制作用。高位体系煤储层富集,单层厚度大,横向分布相当稳定,尤其是高位体系域晚期,是形成优质煤储层最有利的层位。而水进体系域煤储层稀少,单层厚度小,横向分布不稳定,不利于优质煤储层形成。     

Impact of land use covers upon karst processes in a typical Fengcong depression system of Nongla, Guangxi, China

The direction and intensity of karst processes can be deeply affected by soil physical and chemical variations which were resulted from land use. Taking Nongla Fengcong depression area, Mashan County, Guangxi as an example, authors discussed the impact of land use on karst processes based on the data of field limestone tablet. The results showed that the corrosional rates at varied soil depth are quite different. Corrosional rate in woodland and orchard is mostly bigger than 20 mg/a, which is much higher than that in tilled land and shrub. Generally, corrosional rate decreased from orchard, woodland, tilled land, fallow land and shrub successively, in which soil organic matter (OM) and soil pH are two major controlling factors: corrosion process is controlled remarkably by soil OM in woodland and orchard. The higher the organic matter content is and the less the pH value is, the higher the corrosional rate is. Owing to lower organic matter content, the corrosional rate is mainly affected by soil CO₂ in tilled land and shrub.     

Suitability analysis for sand and gravel extraction site location in the context of a sustainable development in the surroundings of Zaragoza (Spain)

Zaragoza city is located in the central Ebro Basin, in the Iberian Peninsula. The fluvial terraces formed by the Ebro River present a valuable resource of sand and gravel deposits. However, taking advantage of these available resources implies conflicts with other land use interests like urban and industrial development as well as agricultural use, which has also traditionally occupied the alluvial terraces. These deposits represent a substantial groundwater resource that should be preserved for future generations. The development of spatial decision support systems (SDSS) has greatly assisted efforts for solving land-use conflicts. These systems combine the benefits of geographic information systems (GIS) and decision support methodologies and are therefore suitable to manage sustainable development of urban areas. In this contribution, an extraction suitability map taking into consideration a variety of environmental criteria is created with the help of a SDSS. The method used is the analytical hierarchy process which is integrated in ArcGIS. Areas most suitable to sand and gravel extraction are located in the high terraces, and in those terraces covered by pediments where the thickness of resource is relatively high. These areas are far from valuable natural areas, outside areas most vulnerable to groundwater contamination, and beneath soils with poor irrigation characteristics.     

A modified DRASTIC model for Siting Confined Animal Feeding Operations in Williams County,Ohio, USA

Three of DRASTIC’s parameters (Depth to Water, Soil Media, and Topography) were modified and another parameter was added (land use/land cover) to the model to determine the potential impact on groundwater from Confined Animal Feeding Operations (CAFO) manure lagoon settings and manure application as fertilizer. Williams County is a mostly agricultural county located in northwest Ohio, USA. It currently has three CAFOs, all dairy, with the possibility of the construction of a multi-million chicken egg CAFO in the near future. A Geographic Information System (GIS) was utilized to modify the Ohio Department of Natural Resources (ODNR) DRASTIC map for the county to fully assess the county-wide pollution potential of CAFOs. The CAFO DRASTIC map indicates that almost half of Williams County has elevated groundwater pollution potential. The rest of the county, primarily the southeast corner, has lower CAFO groundwater pollution potential. Future CAFO development within the county should focus on the southeastern portion of the county where the groundwater table is deeper, and the aquifer is composed of shale substrate with low hydraulic conductivity. The CAFO DRASTIC results are intended to be used as a screening tool and are not to replace site-specific hydrogeologic investigations.     

Glacier change and glacier runoff variation in the Tuotuo River basin,the source region of Yangtze River in western China

Glaciers in the Tuotuo River basin, western China, have been monitored in recent decades by applying topographical maps and high-resolution satellite images. Results indicate that most of glaciers in the Tuotuo River basin have retreated in the period from 1968/1971 to 2001/2002, and their shrinkage area is 3.2% of the total area in the late 1960s. To assess the influence of glacier runoff on river runoff, a modified degree–day model including potential clear-sky direct solar radiation has been applied to the glaciated regions of the river basin over the period 1961–2004. It was found that glacier runoff has increased in the last 44 years, especially in the 1990s when a two-thirds increase in river runoff was derived from the increase in glacier runoff caused by loss of ice mass in the entire Tuotuo River basin.     

Framing in geographical analysis of environmental conflicts: Theory, methodology and three case studies

When applied to environmental concerns, framing offers a rigorous conceptual and analytic approach with potentially practical significance for dealing with complex issues relevant to geography. The purpose of this article is to introduce framing concepts, typology and modes of analysis to address issues which geographers commonly treat: disputes over land ownership and uses, competition for water resources, cultural clashes over control of territory and resources and the impact of spatial patterns and structures when siting noxious sites. Framing analysis is applied to three cases of environmental conflict in Israel and, more generally, for understanding conflicts revolving around the management of human habitats in relation to the physical environment.