Heat flow and thermal modeling of the Yinggehai Basin, South China Sea

Geothermal gradients are estimated to vary from 31 to 43 °C/km in the Yinggehai Basin based on 99 temperature data sets compiled from oil well data. Thirty-seven thermal conductivity measurements on core samples were made and the effects of porosity and water saturation were corrected. Thermal conductivities of mudstone and sandstone range from 1.2 to 2.7 W/m K, with a mean of 2.0±0.5 W/m K after approximate correction. Heat flow at six sites in the Yinggehai Basin range from 69 to 86 mW/m², with a mean value of 79±7 mW/m². Thick sediments and high sedimentation rates resulted in a considerable radiogenic contribution, but also depressed the heat flow. Measurements indicate the radiogenic heat production in the sediment is 1.28 μW/m³, which contributes 20% to the surface heat flow. After subtracting radiogenic heat contribution of the sediment, and sedimentation correction, the average basal heat flow from basement is about 86 mW/m².Three stages of extension are recognized in the subsidence history, and a kinematic model is used to study the thermal evolution of the basin since the Cenozoic era. Model results show that the peak value of basal heat flow was getting higher and higher through the Cenozoic. The maximum basal heat flow increased from 65 mW/m² in the first stage to 75 mW/m² in the second stage, and then 90 mW/m² in the third stage. The present temperature field of the lithosphere of the Yinggehai Basin, which is still transient, is the result of the multistage extension, but was primarily associated with the Pliocene extension.     

Strike-slip fault bridge fluid pumping mechanism: insights from field-based palaeostress analysis and numerical modelling

We present a finite-element study of stress perturbation in evolving compressive and extensional strike-slip fault bridges. The results are compared with a fracture study of a compressive bridge at St Donats, UK. Horizontally interbedded calcareous mudstone and bioclastic calcilutite at St Donats have a distinct vertical permeability anisotropy. This sedimentary sequence behaves as a set of horizontal aquifers. The fluid flow in these aquifers is sensitive to mean stress gradients. Paleostress analysis of field fracture data, verified by finite-element modelling, indicates a rotation of σ₁ towards parallelism with boundary faults inside the growing compressive bridge. Boundary faults and bridge faults recorded numerous fluid flow events. The modelled mean stress pattern shows a regional maximum within the bridge and local maxima/minima pairs at boundary fault tips.Finite-element modelling of an extensional bridge indicates that σ₃ rotates towards parallelism with boundary faults. The mean stress pattern is similar to the pattern in compressive bridge but with maxima and minima locations interchanged. The stress patterns are reestablished by each stress build-up preceding the rupturation of the boundary faults throughout the development stages of strike-slip fault bridges. Mean stress gradients developed pre-failure control the fluid flow in fractures of the strike-slip fault system at and after the end of each stress build-up and the fluid flow in boundary faults post-failure. Fracture reactivation and new fracture generation within an evolving bridge is a process consisting of multiple successive events that retain the storage capacity of the bridge. Rupture and sealing of the main bounding-faults is a step-wise process that opens and closes fluid conduits between areas with different pressures.     

Fluid permeability of sedimentary rocks in a complete stress–strain process

The permeability of sedimentary rocks during triaxial compression tests was investigated to relate it to the complete strain–stress process. It was found that the permeability was not constant, but varied with the stress and strain states in the rocks. Prior to the peak strength, the permeability decreases with increasing load. A dramatic increase in permeability occurs during the strain softening period. In the present study, in situ measurements of fluid flow and pressure in floor strata was carried out in a double longwall mining face in the Yangzhuang colliery. These measurements show that both the strata pressure and the position with respect to the mining face influence the hydrogeologic properties. The permeability increased in the floor strata behind the mining face because those mining induced fractures opened as the strata pressure decreased. To better understand this change in hydraulic behavior around the mining faces, 3-D numerical modeling was carried out. The model provides the general picture of the stress distribution and failure zone both in the floor and roof strata. The field and model results demonstrate the importance of changes in the stress and strain states on the hydrogeology of a site.     

地质图空间数据库建设中的拓扑关系处理

拓扑关系是空间数据库的核心。主要阐述拓扑关系的基本概念，详细介绍MAPGIS和ARC/INFO两大模块中，拓扑关系具体表现形式、处理方法及处理过程中的注意事项，形成了一套较为完善的工作流程，提高了工作效率，为今后的信息化提供了行之有效的工作方法。     

A Comparison of Two-Phase Dynamic Upscaling Methods Based on Fluid Potentials

Although a number of methods for calculating dynamic pseudo-functions have been developed over the years, there is still a lack of understanding as to why a certain method will succeed in some cases but fail in others. In this paper, we describe the results of an assessment of several upscaling methods, namely the Kyte and Berry (KB) method, the Stone method, the Hewett and Archer (HA) method and the Transmissibility-Weighted (TW) method. We have analyzed the equations for deriving the methods and investigated the results of numerical simulations of gas displacing oil, in a variety of models to enable us to gain new insights into these, and related, upscaling methods. In particular, some novel observations on methods based on fluid potential are presented and the issue of using predicted fluid mobilities as a criterion of accuracy of an upscaling method is clarified.     

Experimental Study on Mine Spoils During Superficial Geochemistry Processes

Based on the mineral and chemical compositions of spoils taken from the Shilu Cu-Mo deposit and Hetai gold deposit, the leaching and batch experiments were made on spoils taken from these two deposits using the leaching column designed by the authors. The experimental results showed that it is not always true that the mine drainage is acidic. Its acidity depends on acid-buffering capacity of gangue, host rock and its alteration mineral assemblage. The composition of the drainage water is related with the interaction between superficial or underground water and solid materials in the spoils, including minerals, hydroxides and amorphous substances. The leaching extent of the element is related with its occurrence form in the deposit. The preferential flow results in leaching-out of heavy metals in large amounts. So it is important to prevent the generating of preferential flow in the system. The results will provide very important grounds for the comprehensive management of land and ecological rehabilitation of the mine site.     

MODELING THE FATE AND TRANSPORT OF HYDROPHOBIC ORGANIC COMPOUNDS IN AN UNSTEADY RIVER-ESTUARINE SYSTEM

1 INTRODUCTION Extensive literature (Brown et al., 1985; Sawhney et al., 1981; Bierman and Swain, 1982; Connolly, 1980; Lopez-Avila and Hites, 1980; O扖onnor, 1988) described lots of sorbed pollutants or toxic substances in bed sediments of rivers, even after the effluent was halted for a long time. This is particularly true for hydrophobic organic compounds that can be sorbed on the particles and accumulated in the river bed sediments (Karickhoff et al., 1979). Pollution events of…     

Crystal-rich mass flow deposits related to the eruption of a sublacustrine silicic cryptodome (Early Permian Collio Basin, Italian Alps)

Sedimentological, granulometric and petrographic data are presented from a detailed study on a crystal-rich mass flow deposit, which is presumably related to the eruption of a sublacustrine cryptodome. The deposit forms a prominent intercalation in the Lower Permian Collio Formation in the Italian Alps north of Brescia. Outcrops of the 10–20-m-thick volcaniclastic deposit (Dasdana I Beds, DB) can be traced over 12 km from east to west. The DB consists of a thick, crystal-rich, sandy–gravelly lower subunit representing a sequence of amalgamated Bouma-a(b) divisions overlain by a thin, well-bedded, sandy–muddy subunit that is rich in outsize porphyritic silicic fragments. Modal and computer-aided image analyses reveal that the crystal-rich lower subunit contains up to 80% of volcanogenic crystals. Some samples contain up to 60% of porphyritic fragments, which have a phenocryst content of about 20%. The wide textural range from cryptocrystalline, poikilomosaic, to rarer medium-grained granophyric groundmass, the irregular to lensoid shapes of the porphyritic fragments, and the presence of basement and sedimentary clasts suggest that the DB originated from a sublacustrine eruption of a partially extrusive cryptodome (ca. 1.6 km³). Two other porphyritic felsic cryptodomes (Dosso dei Lupi, Dosso del Bue), described briefly here, emplaced into the Collio Formation sometime after the DB event, and expose flat bases and tilted sediments at their sides. Textures observed in these domes are comparable to those found in the DB porphyritic fragments.     

A model of equilibrium bed topography for meander bends with erodible banks

Channel curvature produces secondary currents and a transverse sloping channel bed, along which the depth increases towards the outer bank. As a result deep pools tend to form adjacent to the outer bank, promoting bank collapse. The interaction of sediment grains with the primary and secondary flow and the transverse sloping bed also causes meanders to move different grain sizes in different proportions and directions, resulting in a consistent sorting pattern. Several models have been developed to describe this process, but they all have the potential to over‐predict pool depth because they cannot account for the influence of erodible banks. In reality, bank collapse might lead to the development of a wider, shallower cross‐section and any resulting flow depth discrepancy can bias associated predictions of flow, sediment transport, and grain‐size sorting. While bed topography, sediment transport and grain sorting in bends will partly be controlled by the sedimentary characteristics of the bank materials, the magnitude of this effect has not previously been explored. This paper reports the development of a model of flow, sediment transport, grain‐size sorting, and bed topography for river bends with erodible banks. The model is tested via intercomparison of predicted and observed bed topography in one low‐energy (5·3 W m^?2 specific stream power) and one high‐energy (43·4 W m^?2) study reach, namely the River South Esk in Scotland and Goodwin Creek in Mississippi, respectively. Model predictions of bed topography are found to be satisfactory, at least close to the apices of bends. Finally, the model is used in sensitivity analyses that provide insight into the influence of bank erodibility on equilibrium meander morphology and associated patterns of grain‐size sorting. The sensitivity of meander response to bank cohesion is found to increase as a function of the available stream power within the two study bends. Copyright © 2002 John Wiley & Sons, Ltd.     

流动成像测井研究进展

流动成像测井属于对非均匀介质动态的非线性测量，通过对油气井内多相流体信息的投影扫描和反演处理，实时成像显示流体分布及流动状况，国外研制的电导法，电容法仪器采用电导探针或电容元件构成阵列测量探头，分别利用油气与水的导电特性和介电特性差异辨识井内流体，对流动截面的测量局限于个别点上，已在水平井中见到应用效果，但对物场信息投影测量的数据量和分辨率未能满足成像要求。我国提出的电磁法采用环状阵列电极构成测量探头，综合利用油气与水的导电和介电特性差异辨识井内流体，可以测量获得多相流体流动截面的清晰图像，为研究开发全新的流动成像测井系统奠定了良好基础。