Division of Gas Accumulation System and Laws Controlling Distribution of Natural Gas in Typical Petroliferous Basins of China

Considering the existing problems of the petroleum system, this paper brings forward the concept of natural gas accumulation system and presents the dividing principles. Then detailed statistics on the accumulation factors of the 32 typical natural gas accumulation systems in China and studies on the laws controlling distribution of gas are collected. The research shows that the petroleum accumulation system is the basic unit controlling petroleum generation, migration and accumulation. Generating intensity, generating amount, accumulating efficiency and migration distance plays an important role in the distribution of natural gas. Through analysis on results of resources evaluation, discovered reserves and residual reserves, potential areas in middle-scaled petroliferous basins in China are forecasted in this paper. Ordos, Sichuan, Tarim and Qaidam basins are found out to be the main basins developing and enriching gas accumulation systems.     

Evidence for compressionally induced high subsidence rates in the Kurile Basin (Okhotsk Sea)

A combined volcanological, geochemical, paleo-oceanological, geochronological and geophysical study was undertaken on the Kurile Basin, in order to constrain the origin and evolution of this basin. Very high rates of subsidence were determined for the northeastern floor and margin of the Kurile Basin. Dredged volcanic samples from the Geophysicist Seamount, which were formed under subaerial or shallow water conditions but are presently located at depths in excess of 2300 m, were dated at 0.84±0.06 and 1.07±0.04 Ma with the laser ⁴⁰Ar/³⁹Ar single crystal method, yielding a minimum average subsidence rate of 1.6 mm/year for the northeast basin floor in the Quaternary. Trace element and Sr–Nd–Pb isotope data from the volcanic rocks show evidence for contamination within lower continental crust and/or the subcontinental lithospheric mantle, indicating that the basement presently at 6-km depth is likely to represent thinned continental crust. Average subsidence rates of 0.5–2.0 mm/year were estimated for the northeastern slope of the Kurile Basin during the Pliocene and Quaternary through the determination of the age and paleo-environment (depth) of formation of sediments from a canyon wall. Taken together, the data from the northeastern part of the Kurile Basin indicate that subsidence began in or prior to the Early Pliocene and that subsidence rates have increased in the Quaternary. Similar rates of subsidence have been obtained from published studies on the Sakhalin Shelf and Slope and from volcanoes in the rear of the Kurile Arc. The recent stress field of the Kurile Basin is inferred from the analysis of seismic activity, focal mechanism solutions and from the structure of the sedimentary cover and of the Alaid back-arc volcano. Integration of these results suggests that compression is responsible for the rapid subsidence of the Kurile Basin and that subsidence may be an important step in the transition from basin formation to its destruction. The compression of the Kurile Basin results from squeezing of the Okhotsk Plate between four major plates: the Pacific, North American, Eurasian and Amur. We predict that continued compression could lead to subduction of the Kurile Basin floor beneath Hokkaido and the Kurile Arc in the future and thus to basin closure.     

Iron colloids/organic matter associated transport of major and trace elements in small boreal rivers and their estuaries (NW Russia)

The chemical status of major and trace elements (TE) in various boreal small rivers and watershed has been investigated along a 1500-km transect of NW Russia. Samples were filtered in the field through a progressively decreasing pore size (5, 0.8 and 0.22 μm; 100, 10, and 1 kD) using a frontal filtration technique. All major and trace elements and organic carbon (OC) were measured in filtrates and ultrafiltrates. Most rivers exhibit high concentration of dissolved iron (0.2–4 mg/l), OC (10–30 mg/l) and significant amounts of trace elements usually considered as immobile in weathering processes (Ti, Zr, Th, Al, Ga, Y, REE, V, Pb). In (ultra)filtrates, Fe and OC are poorly correlated: iron concentration gradually decreases upon filtration from 5 μm to 1 kD whereas the major part of OC is concentrated in the <1–10 kD fraction. This reveals the presence of two pools of colloids composed of organic-rich and Fe-rich particles. According to their behavior during filtration and association with these two types of colloids, three groups of elements can be distinguished: (i) species that are not affected by ultrafiltration and are present in the form of true dissolved inorganic species (Ca, Mg, Li, Na, K, Sr, Ba, Rb, Cs, Si, B, As, Sb, Mo) or weak organic complexes (Ca, Mg, Sr, Ba), (ii) elements present in the fraction smaller than 1–10 kD prone to form inorganic or organic complexes (Mn, Co, Ni, Zn, Cu, Cd, and, for some rivers, Pb, Cr, Y, HREE, U), and (iii) elements strongly associated with colloidal iron in all ultrafiltrates (P, Al, Ga, REE, Pb, V, Cr, W, Ti, Ge, Zr, Th, U). Based on size fractionation results and taking into account the nominal pore size for membranes, an estimation of the effective surface area of Fe colloids was performed. Although the total amount of available surface sites on iron colloids (i.e., 1–10 μM) is enough to accommodate the nanomolar concentrations of dissolved trace elements, very poor correlation between TE and surface sites concentrations was observed in filtrates and ultrafiltrates. This strongly suggests a preferential transport of TE as coprecipitates with iron oxy(hydr)oxides. These colloids can be formed on redox boundaries by precipitation of Fe(III) from inflowing Fe(II)/TE-rich anoxic ground waters when they meet well-oxygenated surface waters. Dissolved organic matter stabilizes these colloids and prevents their aggregation and coagulation. Estuarine behavior of several trace elements was studied for two small iron- and organic-rich rivers. While Si, Sr, Ba, Rb, and Cs show a clear conservative behavior during mixing of freshwaters with the White sea, Al, Pb and REE are scavenged with iron during coagulation of Fe hydroxide colloids.     

Lithosphere structure of European sedimentary basins from regional three-dimensional gravity modelling

A three-dimensional (3D) density model, approximated by two regional layers—the sedimentary cover and the crystalline crust (offshore, a sea-water layer was added), has been constructed in 1° averaging for the whole European continent. The crustal model is based on simplified velocity model represented by structure maps for main seismic horizons—the “seismic” basement and the Moho boundary. Laterally varying average density is assumed inside the model layers. Residual gravity anomalies, obtained by subtraction of the crustal gravity effect from the observed field, characterize the density heterogeneities in the upper mantle. Mantle anomalies are shown to correlate with the upper mantle velocity inhomogeneities revealed from seismic tomography data and geothermal data. Considering the type of mantle anomaly, specific features of the evolution and type of isostatic compensation, the sedimentary basins in Europe may be related into some groups: deep sedimentary basins located in the East European Platform and its northern and eastern margins (Peri-Caspian, Dnieper–Donets, Barents Sea Basins, Fore–Ural Trough) with no significant mantle anomalies; basins located on the activated thin crust of Variscan Western Europe and Mediterranean area with negative mantle anomalies of −150 to −200×10⁻⁵ ms⁻² amplitude and the basins associated with suture zones at the western and southern margins of the East European Platform (Polish Trough, South Caspian Basin) characterized by positive mantle anomalies of 50–150×10⁻⁵ ms⁻² magnitude. An analysis of the main features of the lithosphere structure of the basins in Europe and type of the compensation has been carried out.     

États de contraintes et mécanismes d'ouverture et de fermeture des bassins permiens du Maroc hercynien. L'exemple des bassins des Jebilet et des RéhamnaStates of stresses and opening/closing mechanisms of the Permian basins in Hercynian Morocco. The example of the Jebilet and Réhamna Basins

The fracturing analysis in the Permian basins of Jebilet and Rehamna (Hercynian Morocco) and the underlying terranes allowed us to suggest a model for their opening. Three tectonic episodes are distinguished: a transtensional episode NNE–SSW-trending (Permian I), occurring during the opening along sinistral wrench faults N70–110-trending, associated with synsedimentary normal faults; a transpressive episode ESE–WNW-trending (Permian II), initiating the closure, the normal faults playing back reverse faults and the N70 trending faults dextral wrench faults; a compressional episode NNW–SSE (post-Permian, ante-Triassic), accentuating the closure and the deformation and putting an end to the Tardi-Hercynian compressive movements. To cite this article: A. Saidi et al., C. R. Geoscience 334 (2002) 221–226.     

A cellular model of Holocene upland river basin and alluvial fan evolution

The CAESAR (Cellular Automaton Evolutionary Slope And River) model is used to simulate the Holocene development of a small upland catchment (4·2 km²) and the alluvial fan at its base. The model operates at a 3 m grid scale and simulates every flood over the last 9200 years, using a rainfall record reconstructed from peat bog wetness indices and land cover history derived from palynological sources. Model results show that the simulated catchment sediment discharge above the alluvial fan closely follows the climate signal, but with an increase in the amplitude of response after deforestation. The important effects of sediment storage and remobilization are shown, and findings suggest that soil creep rates may be an important control on long term (>1000 years) temperate catchment sediment yield. The simulated alluvial fan shows a complex and episodic behaviour, with frequent avulsions across the fan surface. However, there appears to be no clear link between fan response and climate or land use changes suggesting that Holocene alluvial fan dynamics may be the result of phases of sediment storage and remobilization, or instabilities and thresholds within the fan itself. Copyright © 2002 John Wiley & Sons, Ltd.     

A model of equilibrium bed topography for meander bends with erodible banks

Channel curvature produces secondary currents and a transverse sloping channel bed, along which the depth increases towards the outer bank. As a result deep pools tend to form adjacent to the outer bank, promoting bank collapse. The interaction of sediment grains with the primary and secondary flow and the transverse sloping bed also causes meanders to move different grain sizes in different proportions and directions, resulting in a consistent sorting pattern. Several models have been developed to describe this process, but they all have the potential to over‐predict pool depth because they cannot account for the influence of erodible banks. In reality, bank collapse might lead to the development of a wider, shallower cross‐section and any resulting flow depth discrepancy can bias associated predictions of flow, sediment transport, and grain‐size sorting. While bed topography, sediment transport and grain sorting in bends will partly be controlled by the sedimentary characteristics of the bank materials, the magnitude of this effect has not previously been explored. This paper reports the development of a model of flow, sediment transport, grain‐size sorting, and bed topography for river bends with erodible banks. The model is tested via intercomparison of predicted and observed bed topography in one low‐energy (5·3 W m^?2 specific stream power) and one high‐energy (43·4 W m^?2) study reach, namely the River South Esk in Scotland and Goodwin Creek in Mississippi, respectively. Model predictions of bed topography are found to be satisfactory, at least close to the apices of bends. Finally, the model is used in sensitivity analyses that provide insight into the influence of bank erodibility on equilibrium meander morphology and associated patterns of grain‐size sorting. The sensitivity of meander response to bank cohesion is found to increase as a function of the available stream power within the two study bends. Copyright © 2002 John Wiley & Sons, Ltd.     

Natural hydraulic cracking: numerical model and sensitivity study

Natural hydrofracturing caused by overpressure plays an important role in geopressure evolution and hydrocarbon migration in petroliferous basins. Its mechanism is quite well understood in the case of artificial hydraulic fracturing triggered by high-pressure fluid injection in a well. This is not so for natural hydraulic fracturing which is assumed to initiate as micro-cracks with large influence on the permeability of the medium. The mechanism of natural hydraulic cracking, triggered by increasing pore pressure during geological periods, is studied using a fracturing model coupled to the physical processes occurring during basin evolution. In this model, the hydraulic cracking threshold is assumed to lie between the classical failure limit and the beginning of dilatancy. Fluid pressure evolution is calculated iteratively in order to allow dynamic adjustment of permeability so that the fracturing limit is always preserved. The increase of permeability is interpreted on the basis of equivalent fractures. It is found that fracturing is very efficient to keep a stress level at the rock’s hydraulic cracking limit: a fracture permeability one order of magnitude larger than the intrinsic permeability of the rock would be enough. Observations reported from actual basins and model results strongly suggest that natural hydraulic cracking occurs continuously to keep the pressure at the fracturing limit under relaxed stress conditions.     

基于DEM的分布式水文模型构建方法

基于 DEM的分布式水文模型是现代水文学同高科技 (如计算机技术、 3S技术等 )相结合的产物 ,是研究变化环境下水文循环与水资源演化规律的理想工具 ,代表了水文模型的最新发展方向。从 DEM的特性出发 ,本文探讨并总结了分布式水文模型的特点、建模思路和模型基本结构框图。在流域离散化方面 ,重点介绍了分布式水文模型常用的三种单元划分方法 ;最后 ,针对分布式水文模型构建问题 ,从“输入模块”、“单元水文模型”、“河网汇流模型”三方面 ,阐述了分布式水文模型微结构构建方法。     

3S一体化技术支持下的西南地区冬小麦估产——以安宁河谷四县为例

农作物遥感估产已经是广泛应用的技术 ,但由于西南地区复杂的地貌类型以及遥感信息源等因素的限制 ,农作物估产方面的研究起步较晚 ,因而研究山区的农作物遥感估产对西南地区有重要的理论价值和现实意义。安宁河谷为一南北走向的山间盆地 ,是四川省第二大粮食生产基地。本文运用遥感 (RemoteSensing)、地理信息系统 (GIS)和全球定位系统(GPS)———简称 3S ,采取全数字式判读方式提取冬小麦的播种面积 ,进行野外点、线采样 ,并利用数理统计方法 ,建立了该地区的冬小麦估产模型