Utilization of lime,slag and fly ash for improvement of a colluvial soil in New South Wales,Australia

In Australia, colluvial soils form large terrains which are often subjected to considerable erosion and mass movement. This study presents a laboratory evaluation of the improvement effected by hydrated lime, milled blast furnace slag and fly ash on a fine grained (erosive) colluvial soil in New South Wales, Australia. Geotechnical tests were conducted to determine the compaction and consolidation characteristics and the compressive and shear strength properties of the blended and natural soil specimens. The effect of these additives on the Atterberg limits and pH levels is also investigated. As large amounts of fly ash and steel slag are produced in New South Wales, it is economically attractive to utilize these industrial by-products for ground improvement rather than employing conventional methods such as lime treatment. This study demonstrates that for the colluvial soil tested, milled slag is the most effective in terms of improving the internal friction angle of the treated soil, while lime is the most suitable for achieving the optimum compressive strength. Non-pozzolanic fly ash is found to be inappropriate as a soil improving agent. The cost of ground treatment using the various additives is also estimated and compared.     

Jadeitic rocks within high pressure metamorphic zone from northeastern Jiangxi Province and their forming and surviving conditions

There is a close relation in time, space and origin between the NEJXO, NEJXDFZ and HPMZ from NEJXP which are located in and constrained by both Yangtze Craton and Cathaysia. These HPMRs principally include (i) Jd-Q-Ab schist, (ii) Lw-Jd-Ab schist, (iii) Jd-Ab schist, and (iv) Gl-schist. The Jd is nearly pure (Jd91-98). Jd surrounded by Ab is separated from Q and survived due to the reaction between Jd and Q, while Lw encircled by Ab remains as a pseudomorph composed of CZo+An. The minerals associated with Jd are Lw, Gl, Ab, Q, CZo, An, Pa, II, Ru, Sp, Ap, and Zr. According to the textures, the mineral paragenesis is classified into four groups (i) PI-Am-Q, (ii) Jd-I,w-GI-Q, (iii) CZo-An-Ab-Q, (iv) Ab-Ana-Ser-Ur, corresponding to (i) 1.0–0.93 Ga, 250°C, 2–3 × 10⁸ Pa; (ii) 0.93–0.79 Ga, 300–350°C, 5–12 × 10⁸ Pa; (iii) 0.79–0.223 Ga, 350–400–120°C, 12–5–3 × 10⁸ Pa; and (iv) < 0. 223 Ga, < 120–50°C, < 3 × 10⁸ Pa, in time, temperature and pressure respectively. A clockwiseP-T-t path is isothermal increasing inP (up to 45 km)—isothermal decreasing inP (up to 5 km)— nearly isobar decreasing in T. Project supported by the National Natural Science Foundation of China.     

Crustal Growth by Magmatic Accretion Constrained by Metamorphic P-T Paths and Thermal Models of the Kohistan Arc, NW Himalayas

Magmatic accretion is potentially an important mechanism inthe growth of the continental crust and the formation of granulites.In this study, the thermal evolution of a magmatic arc in responseto magmatic accretion is modeled using numerical solutions ofthe one-dimensional heat conduction equation. The initial andboundary conditions used in the model are constrained by geologicalobservations made in the Kohistan area, NW Himalayas. Takingconsideration of the preferred intrusion locations for basalticmagmas, we consider two plausible modes of magmatic accretion:the first involves the repeated intrusion of basalt at mid-crustaldepths (‘intraplate model’), and the second evaluatesthe simultaneous intrusion of basalt and picrite at mid-crustaldepths and the base of the crust respectively (‘double-platemodel’). The results of the double-plate model accountfor both the inferred metamorphic P–T paths of the Kohistanmafic granulites and the continental geotherm determined frompeak P–T conditions observed for granulite terranes. Thedouble-plate model may be applicable as a key growth processfor the production of thick mafic lower crust in magmatic arcs. KEY WORDS: thermal model; magmatic underplating; P–T path; granulite; lower crust     

Quantitative Constraints on Metamorphism in the Variscides of Southern Brittany--a Complementary Pseudosection Approach

Previous studies of metapelitic rocks from the core of the southernBrittany metamorphic belt suggest a complex clockwise P–Tevolution. We use pseudosections calculated for an average subaluminousmetapelite composition in the MnNCKFMASH system and averageP–T calculations to investigate in more detail the metamorphicevolution of these rocks. For migmatites, sequential occurrenceof kyanite, kyanite + staurolite and sillimanite suggests thata prograde evolution to P > 8 kbar at T     

Improving Sequential Simulation with a Structured Path Guided by Information Content

Multiple-point simulation is a newly developed geostatistical method that aims at combining the strengths of two mainstream geostatistical methods: object-based and pixel-based methods. It maintains the flexibility of pixel-based algorithms in data conditioning, while enhancing its capability of reproducing realistic geological shapes, which is traditionally reserved to object-based algorithms. However, the current snesim program for multiple-point simulation has difficulty in reproducing large-scale structures, which have a significant impact on the flow response. To address this problem, we propose to simulate along a structured path based on an information content measure. This structured path accounts for not only the information from the data, but also some prior structural information provided by geological knowledge. Various case studies show a better reproduction of large-scale structures. This concept of simulating along a structured path guided by information content can be applied to any sequential simulation algorithms, including traditional variogram-based two-point geostatistical algorithms.     

Retrograded textures and associated mass transfer: evidence for aqueous fluid action during exhumation of the Qinglongshan eclogite, Southern Sulu ultrahigh pressure metamorphic terrane, eastern China

The Qinglongshan eclogites in the Southern Sulu ultrahigh pressure metamorphic (UHPM) terrane show very different retrograded textures from their counterparts in the Northern Sulu terrane, implying a different thermal history. Scanning electron and optical microscope observations indicate that the peak assemblage of the Qinglongshan eclogite is anhydrous, composed of Grt + OmpI + Rt + (Ky + coesite). These primary minerals were replaced by second and third stage minerals, resulting in symplectite pseudomorphs or coronas. The following relationships are inferred: OmpI → OmpII + Ab + Fe‐oxide symplectite (type I) and Rt → Rt + Ilm intergrowth; and, Ky → Pg, OmpII (+Pl) → Amp (+Pl) symplectite (type II), and Grt → Prg (+Fe‐oxide). Mineral chemistry and mass‐balance demonstrate that the pseudomorphed textures were developed by metasomatism involving dissolution and precipitation intensified by fluids along grain boundaries. The formation of symplectite type I produced Fe, Mg and Na but consumed Ca and Si. The Mg and Fe diffused to garnet where exchange of (Mg, Fe) with Ca of the garnet resulted in compositional zonation with decreased Ca towards the edge of garnet grains where Ca was consumed during symplectite formation. The replacement of kyanite by paragonite consumed the extra Na. In the later stage, fluid infiltration partially transformed symplectite type I to type II, and narrow rims of pargasite resorbed garnet from their boundaries. Mass balance suggests that the transformation and resorption would have been coupled during fluid infiltration. In the latest stage, epidote and quartz were precipitated at very late stage as a result of fluid activity along microfractures. Tentative P–T conditions based on mineral reactions and thermocalc software suggest that the retrograded eclogite did not record the granulite facies retrograde evolution characteristic of eclogites from the Northern Sulu terrane. The difference in retrograde evolution between the Southern and Northern Sulu eclogites suggests a different exhumation history.     

Mitigation of liquefaction and associated ground deformations by stone columns

Soil liquefaction and associated ground failures have been a major source of damage during the past earthquakes. The risk of liquefaction and associated ground deformation can be reduced by various ground-improvement methods including the stone column (gravel drain) technique. This paper presents the current state of the stone column technologies as a liquefaction countermeasure. A comprehensive review is provided aiming to: (a) identify key considerations for the general use of stone columns as a liquefaction countermeasure, (b) provide insights for design and construction, (c) compile the latest research developments, and (d) identify sources of useful information. Case histories of field applications and observed field performance are cited to portray different stone column applications and observed effectiveness. The paper identifies areas where more research is needed and includes recommendations for future research and development.     

基于受限汉语的GIS路径重建研究

主要研究基于自然语言 (汉语 )的GIS路径重建问题 ,通过分析带有路径表述信息的汉语文本 ,建立了汉语的NLRP句法模型 ,它是由带有空间语义的动作以及作为动作对象的地理要素构成的集合。考虑到自然语言理解实现的需求 ,论文基于NLRP句法模型定义了受限汉语的NLRP文法 ,在此基础上 ,描述了路径重建算法PRA ,并探讨了算法实现中由于空间认知原因带来的不确定性问题以及其解决方案。最后 ,基于该算法进行了相关实例研究 ,从而验证了该算法的正确性     

Metamorphic evolution of the Maud Belt: P–T–t path for high-grade gneisses in Gjelsvikfjella, Dronning Maud Land, East Antarctica

A metamorphic petrological study, in conjunction with recent precise geochronometric data, revealed a complex P–T–t path for high-grade gneisses in a hitherto poorly understood sector of the Mesoproterozoic Maud Belt in East Antarctica. The Maud Belt is an extensive high-grade, polydeformed, metamorphic belt, which records two significant tectono-thermal episodes, once towards the end of the Mesoproterozoic and again towards the late Neoproterozoic/Cambrian. In contrast to previous models, most of the metamorphic mineral assemblages are related to a Pan-African tectono-thermal overprint, with only very few relics of late Mesoproterozoic granulite-facies mineral assemblages (M₁) left in strain-protected domains. Petrological and mineral chemical evidence indicates a clockwise P–T–t path for the Pan-African orogeny. Peak metamorphic (M_2b) conditions recorded by most rocks in the area (T = 709–785 °C and P = 7.0–9.5 kbar) during the Pan-African orogeny were attained subsequent to decompression from probably eclogite-facies metamorphic conditions (M_2a).The new data acquired in this study, together with recent geochronological and geochemical data, permit the development of a geodynamic model for the Maud Belt that involves volcanic arc formation during the late Mesoproterozoic followed by extension at 1100 Ma and subsequent high-grade tectono-thermal reworking once during continent–continent collision at the end of the Mesoproterozoic (M₁; 1090–1030 Ma) and again during the Pan-African orogeny (M_2a, M_2b) between 565 and 530 Ma. Post-peak metamorphic K-metasomatism under amphibolite-facies conditions (M_2c) followed and is ascribed to post-orogenic bimodal magmatism between 500 and 480 Ma.