车载移动测量系统在大比例尺地形图数学精度检测中的应用

研究了车载移动测量系统在大比例尺地形图数学精度检测中的应用。首先在小范围内对其进行了相关试验,得到其有效性后,对某市全市域的地形图进行了抽样检测;对车载移动测量检验与常规方法检验在外业数据采集、内业数据处理及存储量等几方面进行了比较,分析了车载移动测量检验方法的优劣性,为提高测绘质检效率提供了一种新方案。     

Status of Satellite Orbit Determination and Time Synchronization Technology for Global Navigation Satellite Systems

In the form of satellite ephemerides and clock parameters, the space datum and system time information of one global navigation satellite system (GNSS) is transferred to users. With the continuous updating in the satellite payload such as the high-precision atomic clock, the monitoring and tracking technique such as the inter-satellite link, and in the data processing technique, the accuracy and real-time performance of the satellite ephemeris and clock error products are steadily improved. Starting from December 27th, 2018, the BeiDou Navigation System 3, or BDS-3, has provided the accurate and reliable basic positioning, navigation, and timing (PNT) service for the users in the countries within the “one belt and one road”. This paper has summarized the faced challenges of the precise orbit determination and time synchronization from the regional BDS-2 system to the BDS-3 global system, and the specific solutions at the control segment. In addition, this paper has compared the BDS with other GNSS systems in terms of technical characteristics. Finally, aiming at a higher accuracy and more reliable PNT service, the road map of precise orbit determination and time synchronization technique for the next generation navigation systems is discussed, which will provide a reference for developing the global navigation satellite systems with an even higher accuracy.     

Neptune Trojans: a Revisit and a New Membertwo

Up to now, 17 Neptune Trojan asteroids have been detected with their orbits being well determined by continuous observations. This paper analyzes systematically their orbital dynamics. Our results show that except for two temporary members with relatively short lifespans on Trojan orbits, the vast majority of Neptune Trojans located within their orbital uncertainties may survive in the solar system age. The escaping probability of Neptune Trojans, through slow diffusion in the orbital element space in 4.5 billion years, is estimated to be ～50%. The asteroid 2012 UW177 classified as a Centaur asteroid by the IAU Minor Planet Center currently is in fact a Neptune Trojan. Numerical simulations indicate that it is librating on the tadpole-shaped orbit around the Neptune's L₄ point. It was captured into the current orbit approximately 0.23 million years ago, and will stay there for at least another 1.3 million years in the future. Its high inclination of i ≈ 54^° not only makes it the most inclined Neptune Trojan, but also makes it exhibit the complicated and interesting co-orbital transitions between the leading and trailing Trojans via the quasi-satellite orbit phase.     

紫金山天文台55 yr手绘黑子数据系统差分析

对紫金山天文台(简称紫台)自1954年至2011年共55 yr的手描黑子图进行了数字化.将紫台太阳黑子相对数(PRSN)和黑子群数(PGSN)与国际太阳影响数据分析中心(SIDC)中的对应数据(月平均太阳黑子相对数(IRSN)和月平均黑子群数(IGSN))进行对比研究,发现:(1)紫台黑子数据与SIDC黑子数据有很强的正相关性,说明紫台黑子数据的可靠性;(2) PRSN和IRSN、PGSN和IGSN的系统偏差分别处于7%左右、5%左右,紫台数据与SIDC数据在活动周的极小期的差异性显著大于极大期;(3)紫台的视宁度从1995年开始变差,直接导致了PRSN (PGSN)与IRSN (IGSN)的比值明显变大,表明视宁度的变化影响了紫台黑子的观测质量.     

一种基于卫星遥感的临近预报方法

中尺度对流系统(MCS)是形成强对流天气的主要原因,云团在MCS生命周期中的分裂合并问题是临近预报的难点。为解决这一问题,本文提出了FCC方法,该方法使用质心位移和FY-2卫星数据预测多个对流单体的运动轨迹。多个案例分析证明,FCC算法在MCS的各个生命周期均能进行有效的预测,包括初生、成熟和消散阶段。此外,通过列联表方法验证了所提算法的有效性。     

无人海洋测绘技术体系构建

随着无人技术的快速发展,无人测绘的时代即将到来。本文分析了无人时代技术特征与海洋测绘发展机遇;讨论了无人海洋测绘新理念,构建了无人海洋测绘技术体系,论述了无人海洋测绘技术关键技术;展望了无人海洋测绘技术发展趋势,及其在海洋经济、海洋可持续发展中的应用前景。     

基于时间序列叶面积指数稀疏表示的作物种植区域提取

以华北平原黄河以北地区为研究区域,以时间序列叶面积指数LAI(Leaf Area Index)傅里叶变换的谐波特征作为不同作物识别的数据源,利用稀疏表示的分类方法识别2007年—2016年冬小麦、春玉米、夏玉米等主要农作物种植区域。首先利用上包络线Savitzky-Golay滤波分别对2007年—2016年的时间序列MODIS LAI曲线进行重构,进而对重构的年时间序列LAI进行傅里叶变换,以0—5级谐波振幅、1—5级谐波相位作为作物识别的依据,基于各类地物的训练样本,通过在线字典学习算法构建稀疏表示方法的判别字典,对每个待测样本利用正交匹配追踪算法求解稀疏系数,从而计算对应于各类地物的重构误差,根据最小重构误差判定待测样本的作物类型,并对作物识别结果的位置精度进行验证。结果表明,2007年—2016年作物识别的总体精度为77.97%,Kappa系数为0.74,表明本文提出的方法可以用于研究区域主要作物种植区域的提取。     

车载激光雷达测量系统整体检校方法

针对目前系统检校常用方法中大多依赖手工提取点时无法准确获得检校点、绝对精度较低、对实际数据的适用性差等问题,该文结合自主研发的车载激光雷达测量系统,提出一种利用带有反射片的特制球形标靶及利用距离阈值插值算法快速、方便且准确地对车载激光雷达测量系统进行外参数检校的方法。结果表明:与传统方法相比,该方法可以完全弥补常规方法中提取的检校点不准确、精度低等缺点,适用性及实用性更强;在绝对精度方面,整体水平精度达到0.05m以下,高程精度达到0.06m以下;在相对精度方面,拟合检校球直径精度达到0.003m以下,距离精度达到0.002m以下,证明该方法的精度、适用性完全满足当前车载激光雷达测量系统检校的精度需求。     

Building a model-based personalised recommendation approach for tourist attractions from geotagged social media data

When travelling, people are accustomed to taking and uploading photos on social media websites, which has led to the accumulation of huge numbers of geotagged photos. Combined with multisource information (e.g. weather, transportation, or textual information), these geotagged photos could help us in constructing user preference profiles at a high level of detail. Therefore, using these geotagged photos, we built a personalised recommendation system to provide attraction recommendations that match a user's preferences. Specifically, we retrieved a geotagged photo collection from the public API for Flickr (Flickr.com) and fetched a large amount of other contextual information to rebuild a user's travel history. We then created a model-based recommendation method with a two-stage architecture that consists of candidate generation (the matching process) and candidate ranking. In the matching process, we used a support vector machine model that was modified for multiclass classification to generate the candidate list. In addition, we used a gradient boosting regression tree to score each candidate and rerank the list. Finally, we evaluated our recommendation results with respect to accuracy and ranking ability. Compared with widely used memory-based methods, our proposed method performs significantly better in the cold-start situation and when mining ‘long-tail’ data.     

基于WSR框架的《开发区土地集约利用评价规程》指标体系分析

旨在剖析我国《开发区土地集约利用评价规程》中指标体系存在的问题并提出改进建议。在界定开发区土地集约利用内涵基础上,从要素特征(W维)、利用目标(R维)和评价过程(S维)等3个维度阐述了开发区土地集约利用评价的系统要求,构建关联分析矩阵,对《规程》中评价指标体系的特征差异化、层次完整性和目标关联性等3个方面进行了分析讨论。针对当前《规程》中存在的评价对象混杂、开发区类型需要细化、指标体系不完整、计算方法需修正等问题提出了相应修改建议。