成岩作用与油气侵位对砂岩铀成矿的约束--以准南硫磺沟地区头屯河组砂岩铀成矿为例

为了解准噶尔盆地南缘硫磺沟地区中侏罗统头屯河组砂岩成岩-流体演化与铀成矿响应,进而客观评价其成矿潜力。通过光薄片鉴定、X衍射、扫描电镜分析得出:目的层主要为岩屑细砂岩,依次经历了浅埋藏、深埋藏和表生-热液成岩阶段,遭受较强的机械压实、胶结及溶蚀作用。其黏土矿物以高岭石为主,碳酸盐矿物有细亮晶和泥晶两类,硅质胶结微弱,局部见细晶黄铁矿及其褐铁矿氧化产物。成岩环境可能经历了由酸性到弱碱性再到酸性,由同生期氧化-浅埋期还原-短暂抬升期氧化还原过渡-缓慢沉降期还原增强-快速抬升期氧化的演化过程。砂岩中存在较多油气包裹体;酸解总烃为5.72~449.14 μL/kg,以CH₄为主;方解石脉δ13C_V-PDB为-25‰~-6.7‰,δ18O_V-SMOW为11.1‰~18.9‰;结合野外调查认为目的层存在一期中等偏弱的后生油气侵位,从而影响了砂体的Eh及pH值。以上成岩过程及烃类流体活动使得目的层早期形成了小型层间氧化带型铀矿并得以局部保存,晚期形成了一定规模的地表潜水氧化带型铀矿体。     

Laboratory Simulation of the Formation Process of Surface Geochemical Anomalies Applied to Hydrocarbon Exploration

The formation mechanisms and processes of geochemical anomalies used as proxies in surface geochemistry exploration (SGE) have not been well understood. Previous studies cannot realize 3D measurement of microseeping hydrocarbons from reservoirs to the surface, which made it difficult to understand the features and pathways of deep hydrocarbon microseepages. Understanding the processes of hydrocarbon microseepages will contribute to the acceptance and effectiveness of surface geochemistry. Based on a simplified geological model of hydrocarbon microseepages, including hydrocarbon reservoir, direct caprock, overlying strata and Quaternary sediments, this work established a 3D experimental system to simulate the mechanisms and processes of deep hydrocarbon microseepes extending to the surface. The dispersive halos of microseeping hydrocarbons in the subsurface were adequately described by using this 3D experimental system. Results indicate that different migration patterns of hydrocarbons above the point gas source within the simulated caprock and overlying strata can be reflected by the ratio of i-butane to n-butane (i-C4/n-C4), which follow diffusion and infiltration (buoyancy) mechanisms. This is not the case for vertical measurement lines far from the point gas source. A vertical gas flow in the form of a plume was found during hydrocarbon microseepage. For sampling methods, the high-density grid sampling is favorable for delineating prospecting targets. Hydrocarbon infiltration or buoyancy flow occurs in the zones of infiltration clusters, coupling with a diffusion mechanism at the top of the water table and forming surface geochemical anomalies. These results are significant in understanding hydrocarbon microseepage and interpreting SGE data.     

沉积盆地铀-油(气)共生机理

产于含油(气)盆地中的地浸砂岩型铀矿床与油(气)关系密切,在空间上常与油(气)藏呈共生关系。文章认为其成矿条件和控矿因素相似,并且具有成因联系是二者共生的主要原因。砂岩型铀矿和油(气)藏具有相似的成矿大地构造背景、岩相古地理条件、容矿地层、岩性圈闭、构造控矿条件和有机质基础;在成因上油(气)中的不同组分及其次生矿物对铀有重要的吸附和还原作用,是铀沉淀富集的重要因素之一,铀等放射性元素的存在也有利于油气的生成。由于成矿机理的差异性,砂岩型铀矿与油(气)藏属于异体共生矿床,二者的产出位置并不完全重叠,砂岩型铀矿的产出位置往往更靠近盆缘,且在油(气)储层上方,或以单一矿种产出。     

Tectono–Thermal Evolution, Hydrocarbon Filling and Accumulation Phases of the Hari Sag, in the Yingen–Ejinaqi Basin, Inner Mongolia, Northern China

This work restored the erosion thickness of the top surface of each Cretaceous formations penetrated by the typical well in the Hari sag, and simulated the subsidence burial history of this well with software BasinMod. It is firstly pointed out that the tectonic subsidence evolution of the Hari sag since the Cretaceous can be divided into four phases: initial subsidence phase, rapid subsidence phase,uplift and erosion phase, and stable slow subsidence phase. A detailed reconstruction of the tectonothermal evolution and hydrocarbon generation histories of typical well was undertaken using the EASY R_0% model, which is constrained by vitrinite reflectance(R_0) and homogenization temperatures of fluid inclusions. In the rapid subsidence phase, the peak period of hydrocarbon generation was reached at c.a.105.59 Ma with the increasing thermal evolution degree. A concomitant rapid increase in paleotemperatures occurred and reached a maximum geothermal gradient of about 43-45℃/km. The main hydrocarbon generation period ensued around 105.59-80.00 Ma and the greatest buried depth of the Hari sag was reached at c.a. 80.00 Ma, when the maximum paleo-temperature was over 180℃.Subsequently, the sag entered an uplift and erosion phase followed by a stable slow subsidence phase during which the temperature gradient, thermal evolution, and hydrocarbon generation decreased gradually. The hydrocarbon accumulation period was discussed based on homogenization temperatures of inclusions and it is believed that two periods of rapid hydrocarbon accumulation events occurred during the Cretaceous rapid subsidence phase. The first accumulation period observed in the Bayingebi Formation(K_1 b) occurred primarily around 105.59-103.50 Ma with temperatures of 125-150℃. The second accumulation period observed in the Suhongtu Formation(K_1 s) occurred primarily around84.00-80.00 Ma with temperatures of 120-130℃. The second is the major accumulation period, and the accumulation mainly occurred in the Late Cretaceous. The hydrocarbon accumulation process was comprehensively controlled by tectono-thermal evolution and hydrocarbon generation history. During the rapid subsidence phase, the paleo temperature and geothermal gradient increased rapidly and resulted in increasing thermal evolution extending into the peak period of hydrocarbon generation,which is the key reason for hydrocarbon filling and accumulation.     

尼泊尔低喜马拉雅推覆带油源对比及油气成藏

尼泊尔低喜马拉雅推覆带油气苗来源不清极大地影响了该区油气勘探.在地质-地球物理综合调查的基础上,利用油气地球化学、碳同位素及生烃史模拟对尼泊尔代莱克地区油源和成藏过程进行了研究.结果表明:①尼泊尔代莱克地区油苗产于Padukasthan断裂,可分两期,第一期呈含油断层泥产出,氯仿沥青"A"为149～231 μg/g,RR.为0.81％,氯仿沥青"A"的δ13C相对较重(-26.24‰～-27.10‰),族组分具有正碳同位素序列,发黄绿色荧光,为典型的低熟煤成油,第二期呈液态油产出并遭受微生物降解,金刚烷IMD指数为0.33～0.45,R.为1.24％～1.53％,3,4-DMD含量46％～47％,全油δ13C为-29.50‰～-29.45‰,族组分碳同位素趋于一致,发蓝色荧光,为海相成因高熟油;②第一期油来源于Surkhet群的Melpani组和Gondwana群煤系烃源岩,为Ⅲ型有机质低熟阶段的产物,第二期来源于Surkhet群的Swat组浅海陆棚相黑色页岩,为Ⅱ1型有机质生油高峰的产物,两期油与Lakharpata群过成熟黑色泥岩和Siwalik群未熟泥岩没有亲缘关系;③尼泊尔低喜马拉雅推覆带具有"多源多期、推覆增熟、砂体控储、披覆控聚"的油气成藏模式,油气成藏过程可划分为沉积浅埋、构造圈闭形成、深埋油藏形成、气藏形成和晚期改造定型5个演化阶段;④尼泊尔低喜马拉雅推覆有利于Gondwana群、Surkhet群深埋增温、持续快速生烃和晚期成藏,对比邻区巴基斯坦的含油气盆地,尼泊尔低喜马拉雅推覆带及相邻类似地区具备良好的油气成藏条件.     

塔里木盆地玉尓吐斯组高频层序沉积充填演化特征及控烃作用

结合9个野外剖面和17口井,对塔里木盆地玉尔吐斯组沉积演化及其对烃源岩的制约作用进行了系统研究和分析。在精细对比后发现,塔里木盆地下寒武统玉尔吐斯组可分为2个三级层序(SQ1、SQ2)、5个四级层序(sq1—sq5),其中三级层序SQ1可分为3个四级层序,SQ2可分为2个四级层序。SQ1发生在寒武纪初期,海进速度较慢,影响范围相对局限,而SQ2的海进则相对迅速,影响范围较大。四级层序sq1发生在第一次海侵初期,水体浅,主要沉积紫红色白云岩、灰黑色砂屑白云岩,起填平补齐的作用;sq2、sq4发生在海侵—海退的转换时期,是两套深水的沉积,岩性以黑色泥岩、硅质泥岩和硅质岩为主,局部发育泥岩与条带状白云岩互层;sq3、sq5是海退过程中的浅水沉积,主要发育灰色白云岩和藻白云岩,局部有泥质夹层。利用Mn、Fe、Ti、Rb、K、Sr、Ba、Cu、U、V、Mo等元素及其比值进行沉积环境分析表明,sq2时期,水体深度大、盐度低、气候温暖湿润,有利于生物发育,并且其硫化缺氧的环境极其有利于有机质的保存;sq4时期,水体深度较大,盐度相对较小,气候相对温暖湿润,较为适合生物生存,并且其硫化缺氧夹次氧化的环境,较为适合有机质保存。高频海平面变化与沉积环境演化影响着玉尔吐斯组的烃源岩分布与品质,sq2时沉积的烃源岩品质优于sq4,但是其分布范围小于sq4。     

辽河西部凹陷曙北地区沙四段薄砂层成因类型及分布规律

为了明确辽河西部凹陷曙北地区沙河街组四段薄砂层成因类型及分布规律,从岩心、测井响应和地震反射特征等方面总结了各类成因薄砂层的识别标志,并预测了各砂层组的砂体展布,探讨了砂体发育的控制因素,总结了沉积模式.研究结果表明,曙北地区沙四段为扇三角洲-湖泊的沉积体系,薄砂层发育水下分流河道、河口坝、低隆滩坝、沿岸浅滩4种成因类型,其中以水下分流河道和低隆滩坝为主.古地貌、古物源和古水深控制了各类砂体的展布.以曙光和兴隆台古潜山一线为界,南部为扇三角洲体系沉积区,主要发育前缘水下分流河道和河口坝;北部（包括低隆区）为无明显水流注入的半封闭湖湾区,主要发育低隆滩坝砂体和灰/云坪,在西侧沿岸局部地区还发育沿岸浅滩.储量区外大面积发育的低隆滩坝砂体,是下一步碎屑岩增储上产的潜在接替区域.     

烃源岩地质色层效应的模拟实验

利用未混油或混油源岩样品在低温、加压条件下分别对纹层状泥岩、暗色块状泥岩及灰质块状泥岩样品进行排烃模拟实验,其中块状泥岩及灰质块状泥岩被研碎后混入同层原油,而纹层状泥岩不被研碎(也未混油),以保持其层理结构的完整性。实验结果显示,排烃过程造成轻烃相对富集,色谱图中主峰碳前移,正构烷烃分布及部分甾、萜烷参数值在排烃过程中产生明显变化,萜烷对运移的敏感性没有甾烷强。在排烃过程中纹层状泥岩与块状泥岩及灰质块状泥岩的地质色层效应有着显著的差异,相对而言,块状泥岩与块状灰质泥岩的排烃效率低,但排烃过程造成了它们出现较为明显的地质色层效应,而纹层状泥岩排烃效率高,但在排烃过程中地质色层效应不明显。分析认为源岩的物理结构是造成这种地质色层效应的差异的主要原因之一。     

东营凹陷砂岩透镜体油气成藏机理及有利区预测

近几年济阳坳陷的勘探实践表明, 对岩性油藏的含油性差异、成藏机理尚认识不清, 这制约了隐蔽油气藏的进一步勘探.在东营凹陷145个砂岩透镜体油藏含油性统计分析的基础上, 结合典型透镜体油藏详细解剖和核磁共振物理模拟实验结果综合研究后发现: 砂岩透镜体圈闭形成时的构造和沉积环境、围岩生排烃条件、砂体储集条件是其成藏的主控因素.只有围岩(源岩) 进入供烃门限后, 其与砂体界面处的毛管压力差、烃浓度梯度产生的扩散力和膨胀力3者之和大于砂体中过剩的水向外渗滤遇到的阻力, 即成藏动力大于成藏阻力时, 砂岩透镜体才能成藏.当砂体沉积环境、围岩生排烃条件、砂体自身储集条件3方面均满足一定条件时, 圈闭才具备形成砂岩透镜体油藏的条件, 并且上述3方面条件越优越, 圈闭含油性就越好.用此方法对东营凹陷下第三系沙三中亚段砂岩透镜体油藏的分布进行了预测.