Distributed discharge and sediment concentration predictions in the sub‐humid Ethiopian highlands: the Debre Mawi watershed

Experimental research in the Ethiopian highlands found that saturation excess induced runoff and erosion are common in the sub‐humid conditions. Because most erosion simulation models applied in the highlands are based on infiltration excess, we, as an alternative, developed the Parameter Efficient Distributed (PED) model, which can simulate water and sediment fluxes in landscapes with saturation excess runoff. The PED model has previously only been tested at the outlet of a watershed and not for distributed runoff and sediment concentration within the watershed. In this study, we compare the distributed storm runoff and sediment concentration of the PED model against collected data in the 95‐ha Debre Mawi watershed and three of its nested sub‐watersheds for the 2010 and 2011 rainy seasons. In the PED model framework, the hydrology of the watershed is divided between infiltrating and runoff zones, with erosion only taking place from two surface runoff zones. Daily storm runoff and sediment concentration values, ranging from 0.5 to over 30 mm and from 0.1 to 35 g l^?1, respectively, were well simulated. The Nash Sutcliffe efficiency values for the daily storm runoff for outlet and sub‐watersheds ranged from 0.66 to 0.82, and the Nash–Sutcliffe efficiency for daily sediment concentrations were greater than 0.78. Furthermore, the model uses realistic fractional areas for surface and subsurface flow contributions, for example between saturated areas (15%), degraded areas (30%) and permeable areas (55%) at the main outlet, while close similarity was found for the remaining hydrology and erosion parameter values. One exception occurred for the distinctly greater transport limited parameter at the actively gullying lower part of the watershed. The results suggest that the model based on saturation excess provides a good representation of the observed spatially distributed runoff and sediment concentrations within a watershed by modelling the bottom lands (as opposed to the uplands) as the dominant contributor of the runoff and sediment load. Copyright © 2014 John Wiley & Sons, Ltd.     

南海神狐海域水合物一维速度结构研究： 基于中—低饱和度水合物区的约束

高精度OBS探测作为目前研究水合物的常用技术手段,可以获取水合物矿体精细速度结构,在研究天然气水合物饱和度、水合物资源的预测与开发等方面具有重要指导意义。然而正演模拟OBS速度结构是繁琐漫长的过程,构建合理的初始模型是后续精细结构快速成像的重要前提。本研究基于全球18个已探明地震波速度的水合物区,分析了水合物矿体内纵波速度的共性特征和影响因素,拟合了水合物矿体带纵波速度与海水深度、沉积物厚度的经验公式。综合经验公式、OBS数据与多道地震剖面,建立了神狐水合物区横向均匀初始模型,并通过射线追踪与走时拟合模拟了神狐海域的一维纵波速度结构。结果表明,神狐水合物矿体带具有高纵波速度(1.83~1.92 km/s）,游离气层具有低P波速度（1.60~1.70 km/s）,此外,基于全球的水合物速度经验公式对神狐海域速度结构模拟具有重要参考意义,有望为获取神狐海域二维/三维精确速度结构提供可靠的初始模型,进而指导水合物精细勘察与资源评估。     

天然气水合物样品带压转移装置的抓捕机构设计

在天然气水合物岩心样品的带压转移过程中,岩心衬管抓捕装置是实现样品转移的关键。岩心抓取是在岩心管内进行,属于非可视化操作过程,同时岩心样品和抓捕器都处于高压液体中,岩心衬管与岩心管之间的间隙非常小,要保证岩心样品的原位状态,对岩心抓捕装置的结构设计、精准定位、快速抓取和释放都有很高的要求。根据该装置所需实现的抓取、拖动、定位和释放功能,设计挂盘自锁和触碰解锁机构,探针抓取衬管,经过室内抓捕实验,该机构可以顺利抓捕和解卡,其结构简单,能在压力状态下进行岩心转移,加快了天然气水合物样品的带压转移装置的研究进展。     

水合物储层伺服降压开采模型试验研究

深海水合物赋存于一定的温度和压力环境下,降压开采时降压速率对分解产气速率和储层变形特性影响显著。利用浙江大学自主研发的水合物降压开采试验装置,通过伺服控制降压速率,初步开展了水合物储层模型降压开采试验,研究了储层温度场、孔压场、产气量等的响应特性,探讨了降压速率对产气效率和储层变形特性的影响规律。试验表明：水合物竖井降压开采时,开采井周围储层温度率先下降,分解域由井周逐步向周围发展。适当提高降压速率能够提高储层开采效率,但降压速率过快时易导致水合物重生成,反而不利于水合物高效持续稳定开采,开采时应选择合理的降压速率以达到最优产气效率。开采过程中根据储层孔隙与外界连通程度,储层孔隙状态可分为完全封闭型、局部封闭型和开放型3种类型。储层开采试验完成后,浅层土体出现 3 种不同变形特征的区域：I 区为井周土层,呈漏斗型下陷;II 区土层平坦,无明显扰动痕迹;III 区为边界土层,该处水气产出受阻导致部分气体向上迁移引起土丘状隆起带出现。这些变形特征与气体在储层中的迁移路径和运移模式相关。通过相似性分析,给出了模型与原型分解时间和产气量等的对应关系。     

液氮溶浸对不同煤阶含水煤样渗流特性的影响

中国包含多种煤阶煤层,由于煤质、地质条件等差异,不同煤层中的水分赋存情况也具有较大差异性。煤阶、饱水度作为影响液氮低温致裂效果的两个重要因素,有必要对其进行深入研究。为此,分别选择褐煤、烟煤与无烟煤3种煤阶煤样,并制备得出饱水度分别为0%、33%与99%的煤样进行液氮溶浸处理,使用摄像机定点拍摄、观察煤样表面宏观裂隙处理前后的演化规律,并对煤样进行氮气渗流试验。试验结果表明：液氮溶浸后褐煤因产生的一条与多条贯穿裂隙发生整体结构上的断裂,烟煤表面有新裂隙产生,原生宏观裂隙有一定的扩展与延伸,无烟煤表面宏观裂隙无明显发育;煤样饱水度越高,液氮的致裂增透效果越显著;液氮溶浸对3种煤阶煤样的致裂增透效果关系为：褐煤>烟煤>无烟煤,在完全干燥状态下,由于热应力不足以破坏颗粒间链接,烟煤与无烟煤的增透效果近似相等;对于褐煤,液氮溶浸处理对完全干燥状态下的煤体即产生有效致裂,渗透率平均增幅高达559.35%,对于烟煤,在饱水度为33%和99%的状态下,液氮溶浸对煤体具有明显致裂效果,渗透率平均增幅分别为330.60%和448.77%,对于无烟煤,在饱水度为99%的状态下液氮溶浸处理才能对煤体产生有效致裂,渗透率平均增幅为185.53%。     

http://www.sciencedirect.com/science/article/pii/S1674987114000668

Microbial diversity in the hydrate-containing (sites SH3B and SH7B) and-free (sites SH1B, SH5B, SH5C) sediments collected from the Shenhu area of the South China Sea (SCS) was investigated using 16S rR...     

Refined conceptualization of TOPMODEL for shallow subsurface flows

The TOPMODEL framework was used to derive expressions that account for saturated and unsaturated flow through shallow soil on a hillslope. The resulting equations were the basis for a shallow‐soil TOPMODEL (STOPMODEL). The common TOPMODEL theory implicitly assumes a water table below the entire watershed and this does not conceptually apply to systems hydrologically controlled by shallow interflow of perched groundwater. STOPMODEL provides an approach for extending TOPMODEL's conceptualization to apply to shallow, interflow‐driven watersheds by using soil moisture deficit instead of water table depth as the state variable. Deriving STOPMODEL by using a hydraulic conductivity function that changes exponentially with soil moisture content results in equations that look very similar to those commonly associated with TOPMODEL. This alternative way of conceptualizing TOPMODEL makes the modelling approach available to researchers, planners, and engineers who work in areas where TOPMODEL was previously believed to be unsuited, such as the New York City Watershed in the Catskills region of New York State. Copyright © 2002 John Wiley & Sons, Ltd.     

南海北部海区海底沉积物中孔隙水的Cl~-和SO_4~(2-)浓度异常特征及其对天然气水合物的指示意义

报道了中国南海北部海区海底沉积物中孔隙水的Cl-和SO42-质量浓度的变化特征, 圈定了孔隙水中Cl-质量浓度的高值异常区。由于水合物形成过程中的排盐效应, 会使其上覆浅表层沉积物中孔隙水的盐度增高, 因此这些氯离子的高值异常区值得进一步的勘查。对孔隙水中SO42-的质量浓度分析表明, 研究区的一些站位表现出随深度增加SO42-的质量浓度梯度发生明显的变化, 计算的硫酸盐甲烷交接带SMI界面深度均在 10m左右, 与ODP164航次和ODP204航次有天然气水合物的钻孔的SMI界面深度基本吻合, 说明这些站位深部有天然气水合物存在的可能性。     

罗布泊地区凝结水对潜卤水资源量评价的影响分析

新疆罗布泊地区属于极端干旱气候地区,大气降水对地下水的补给极其有限,长期以来,众多学者认为凝结水量是罗布泊干盐湖潜卤水的重要补给来源之一。本次通过在罗北凹地地区开展的凝结水试验,较准确地计算了其补给资源量,指出尽管研究区凝结水总生成量较大,但真正能入渗补给到潜卤水饱水带的量却极少,绝大多数凝结水都以难以开发利用的土壤水形式短暂保存,被蒸发散失到大气中,对潜卤水资源量评价影响较小。