高分辨率遥感影像的精纠正

论述了对高分辨率遥感影像进行精纠正获得正射影像的关键技术。若干实际不同分辨率的高分辨率遥感影像被用于相应的实验,实例证明了本文算法的正确性。     

Attenuation of compressional waves in peridotite measured as a function of temperature at 200 MPa

A technique has been developed to determine attenuation in rocks at high temperature using a gas-media, high-pressure apparatus. A pulse transmission technique and a spectral ratio method are used to study compressional seismic properties of rocks. Seismic waves are transmitted to and from the sample through buffer rods of mullite. The effect of seismic wave reflections within the sample assembly are cancelled out by taking ratios of the spectra measured at different temperatures. In order to obtain good signal-to-noise ratio for resolving the attenuation at high pressure and temperature, special care is taken in the sample assembly and the ultrasonic coupling between the sample, buffer rods and transducers. A very tight connection of the sample-buffer rod-transducer is essential for obtaining high frequency signals (>300 kHz) at high temperature. A small mass is attached to each outside end of the transducer to drive low frequency signals (<250 kHz) into the sample. Before attenuation measurements, the sample and the buffer rods are tightly compacted in a platinum tube at high pressure and room temperature to ensure pressure seal of the sample assembly. The frequency range of measurement covers 50 to 450 kHz for the sample. Attenuation is very small in the buffer rod compared to the sample for the entire temperature range of the study. Because of the small attenuation, a wide frequency band of 50 kHz to 3.2 MHz can be covered for investigating the attenuation in the buffer rod. The technique has been used to measure attenuation at high confining pressure, and temperatures including sub- and hyper-solidus of upper mantle rocks. Therefore, effects of partial melting on attenuation can be studied.The method is applied to the attenuation measurement in a peridotite as a function of temperature to 1225°C at 200 MPa confining pressure. At high temperature, signal amplitude decays more rapidly at high frequency than at low frequency, from which attenuation (andQ) can be determined using a spectral ratio method. No frequency dependence ofQ is resolved for both the sample and the buffer rod over the entire temperature and frequency ranges of the measurement. The results show thatQ decreases rapidly with increasing temperature even in the temperature range below the solidus of peridotites. Such temperature sensitivity ofQ is probably more useful to probe thermal structure in the upper mantle than that of conductivity at temperatures below the solidus. The results in this study are compared with available seismic velocity, electrical conductivity and solidus data for peridotites, suggesting that there is no discontinuous change in both mechanical and electrical properties of peridotites at the solidus temperature. Even at hypersolidus temperatures, it appears that velocity drops and conductivity increases continuously (not abruptly) with increasing melt fraction. This implies that mechanical and electrical properties of the upper mantle will gradually change at the boundary where the geotherm crosses the solidus.     

圆钢管约束高强灌浆料局部承压性能研究

以圆钢管约束高强灌浆料局部承压性能试验为基础,基于ABAQUS有限元计算平台,通过建立分段模型(Multi-section Model简称MSM模型)进行数值模拟,探究圆钢管约束高强灌浆料在局部承压作用下的力学性能,并将软件计算得到的荷载-位移曲线与试验结果进行对比分析。结果表明,分段模型适用于圆钢管约束高强灌浆料局部承压作用下的数值模拟,且计算结果与试验结果吻合较好;增大试件高径比、钢管壁厚和高强灌浆料强度均可提高其极限承载力。     

洪家渡水电站左坝肩高边坡稳定及加固措施研究

贵州洪家渡水电站左坝肩高边坡开挖高度310 m,采用弹塑性有限元数值模拟方法对左坝肩高边坡施工期岩体应力应变状态进行分析研究,并结合现场变形观测资料对计算结果进行验证,从而对左坝肩高边坡的稳定性进行评价并提出相应的加固措施。     

NUMERICAL EXPERIMENTS AND ANALYSIS OF DIGITAL FILTER INITIALIZATION FOR WRF MODEL

Initialization and initial imbalance problem were discussed in the context of a three-dimensional variational data assimilation system of the new generation “Weather Research and Forecasting Model”. Several options of digital filter initialization have been tested with a rain storm case. It is shown that digital filter initialization, especially diabatic digital filter initialization and twice digital filter initialization, have effectively removed spurious high frequency noise from initial data for numerical weather prediction and produced balanced initial conditions. For six consecutive intermittent data assimilation cycles covering a 3-day period, mean initialization increments and impact on forecast variables are studied. DFI has been demonstrated to provide better adjustment of the hydrometeors and vertical velocity, reduced spin-up time, and improved forecast variables quantity.     

晋冀内蒙交界区下地壳流变性质的实验研究及其构造演化意义

酸性和基性麻粒岩的高温度压实验表明,基稳态流动律分别为：ε＝２０．７ｅｘｐ（－２８８／ＲＴ）·Δσ＾３．０和ε＝１０＾６．５９ｅｘｐ（－４２５／ＲＴ）·Δσ＾３．０２,并可与加拿大地盾的麻粒岩流动津相比。在下地壳的温度７００℃-１０００℃、压力１．０Ｇｐａ-１．２ＧＰａ和应变率１０＾－４／ｓ￣１０＾－７／ｓ条件下,岩石变形以韧性变形为主,并发育韧性剪切带,其中辉石和斜长石极易发生动态重结晶及定向排成线理,石英则巳静态恢复,此结果与野外观察的吻合。下地壳的宏观流变模型显示,增厚型下地壳存在一厚的低蠕变强度层,减薄型地壳则上地壳也出现低强度层,太陆下地壳这种低蠕变强度层的流变性质有助于岩石圈增厚和减薄的发生。     

耐230 ℃高温海水钻井液室内实验研究

为了解决深海油气井工程和大洋科学钻探深部高温井段钻井液流变稳定性和护壁性能等变差问题,以复合粘土为造浆材料,通过优选抗温抗盐降滤失剂、防塌剂和高温稳定剂等关键处理剂及钻井液配方优化研究,研发了一套耐230 ℃高温海水钻井液配方。采用高温高压流变仪、六速旋转粘度计和高温高压滤失仪等仪器,开展耐230 ℃高温海水钻井液的综合性能评价,如热稳定性、高温流变性等。实验结果显示,密度1.5 g/cm³的钻井液在230 ℃老化16 h前后,表观粘度变化率为2.5%,高温高压滤失量为23 mL。研究结果表明,该海水钻井液抗温可达230 ℃,具有良好的抗高温稳定性、高温流变性能以及较低的高温高压滤失量,可满足深海高温硬岩钻探要求。     

乌东德高拱坝极限抗震能力研究

乌东德水电站是金沙江下游河段上4个水电梯级的最上游梯级,大坝为265 m高的双曲拱坝。采用非线性有限元法,将拱坝坝体-坝基作为一个整体系统,在考虑坝体横缝影响及无限地基辐射阻尼影响基础上,模拟坝肩控制性滑块各滑裂面在地震作用下张开、滑移的非线性力学行为,研究设计与校核地震作用下大坝的抗震性能,探讨大坝-坝基整体系统在强震作用下的抗震潜力。研究结果表明：设计地震条件下,坝体仅在拱端应力集中区域拉应力超过抗拉强度,压应力则均满足强度要求,坝肩块体稳定,大坝-坝基体系的整体安全性可以保证;校核地震条件下,坝体应力值略有增加,能够满足不溃坝的设防要求;以大坝-坝基代表性的位移、变形量变化曲线的拐点作为评价极限抗震能力的标准,可知拱坝-坝基体系的抗震超载安全系数为2.7,相应的基岩水平向峰值加速度0.729g,拱坝-坝基体系抗剪参数强度储备安全系数为2.0,乌东德高拱坝具备较强的极限抗震能力。     

Petrology and PGE Abundances of High‐Cr and High‐Al Podiform Chromitites and Peridotites from the Bulqiza Ultramafic Massif,Eastern Mirdita Ophiolite,Albania

The Bulqiza ultramafic massif, which is part of the eastern Mirdita ophiolite of northern Albania, is world renowned for its high-Cr chromitite deposits. High-Cr chromitites hosted in the mantle section are the crystallized products of boninitic melts in a supra-subduction zone (SSZ). However, economically important high-Al chromitites are also present in massive dunite of the mantle-crust transition zone (MTZ). Chromian-spinel in the high-Al chromitites and dunites of the MTZ have much lower Cr# values (100Cr/(Cr+Al)) (47.7–55.1 and 46.5–51.7, respectively) than those in the high-Cr chromitites (78.2–80.4), harzburgites (72.6–77.9) and mantle dunites (79.4–84.3). The chemical differences in these two types of chromitites are reflected in the behaviors of their platinum-group elements (PGE). The high-Cr chromitites are rich in IPGE relative to PPGE with 0.10–0.45 PPGE/IPGE ratios, whereas the high-Al chromitites have relatively higher PPGE/IPGE ratios between 1.20 and 7.80. The calculated melts in equilibrium with the high-Cr chromitites are boninitic-like, and those associated with the high-Al chromitites are MORB-like but with hydrous, oxidized and TiO2-poor features. We propose that the coexistence of both types of chromitites in the Bulqiza ultramafic massif may indicates a change in magma composition from MORB-like to boninitic-like in a proto-forearc setting during subduction initiation.     

基于InSAR技术的川西高山峡谷区地质灾害早期识别研究——以小金川河流域为例

采用短基线集时序干涉测量(small baseline subset InSAR,SBAS-InSAR)技术,利用多时相合成孔径雷达数据,对川西高山峡谷区开展地表多时相、长时序形变监测与地质灾害隐患早期识别研究。介绍了时序InSAR方法原理,梳理了数据处理流程,分析了小金川河流域雷达可视性,利用2018-11—2019-12共26期的Sentinel-1A历史存档数据开展了流域内地表形变监测,结果表明: 流域内雷达视线方向的年平均形变速率为-51.12~75.28 mm/a; 依据形变异常分布规律,共判译出4处形变异常区与11处潜在地质灾害隐患点,其中6处隐患点为已知地质灾害点,其余5处隐患点尚不为人知。以隐患点P1(阿娘寨滑坡)为典型案例,开展了长时序监测分析与验证,评估利用InSAR技术开展地质灾害隐患早期识别的可靠性,证明了SBAS-InSAR技术在地质灾害早期识别中的优势及有效性,其技术成果在川西高山峡谷区具有大范围推广应用的潜力。