Development of A Depth-Integrated Longshore Current Model with Unstructured Grids

A depth-integrated model for simulating wave-induced longshore current was developed with unstructured grids. Effects of surface roller and horizontal mixing under combined waves and currents were incorporated in the numerical model. Recommended values of model coefficients were also proposed based on sensitivity analysis. Field observations and three series of laboratory measurements including two cases conducted on the plane beach and one implemented on the ideal inlet were employed to examine the predictive capability of this model. For the field case and laboratory cases conducted on the plane beach, numerical results were compared favorably with the measured data. For the case with an ideal inlet, simulated circulation pattern is supposed to be reasonable although some deviations between numerical results and measured data still can be detected.     

Laboratory Study for Influence of Clay Content (CC) on Wave-Induced Liquefaction in Marine Sediments

In this artice, the influence of clay content on the wave-induced liquefaction in marine sediments was reported. The one-dimensional (1-D) equipment was setup with a vertical cylinder and 1.8–m–thick clayey sandy deposit and 0.2–m–thick water above the deposit. Unlike the previous experimental study for a single soil layer, this study used sand-kaolin mixtures, sand-illite mixtures, and sand-bentonite mixtures as the experimental samples. A series of experiments with 3,000 wave cycles in each test were conducted under numerous wave and soil conditions, which allowed us to examine the influence of clay content (CC) on wave-induced liquefaction in marine sediments. The experimental results showed that the clayey sandy deposit will become prone to liquefaction with the increase of CC when CC is less than a critical value, which depends on the type of clay. However, when CC is greater than the critical value, liquefaction depth will decrease as CC increases. Furthermore, when the CC value reaches a certain level, liquefaction will not occur. For example, no liquefaction occurs when CC ≥ 33% for both kaolin-sand and illite-sand mixtures and CC ≥ 16.36% for bentonite-sand mixtures.     

Study on Longitudinal Deformation Profile of Rock Mass in a Subsea Tunnel

During tunnel excavation, the deformation of surrounding rock due to the unloading of rock mass will vary with time. However, the measured displacement of surrounding rock is only a part of the actual longitudinal deformation profile. There is a need to analyze the longitudinal deformation profile to identify the deformation state and evaluate the stability of surrounding rock mass. In the present article, the variation of pre-deformation of surrounding rock due to excavation was analyzed, and the release coefficient was obtained from the measured results. For the Qingdao subsea tunnel, the measured crown settlement of surrounding rock was analyzed using the regression analysis method, and the longitudinal deformation profile of rock mass was simulated using the numerical calculation method. Moreover, based on the conditions of the subsea tunnel, a solid-fluid coupling model test was carried out to check the reliability of the numerical calculation results. The results of the model test were consistent with the numerical calculation results.     

Nonparametric Estimation of Undrained Shear Strength for Normally Consolidated Clays

For decades, various well-known empirical correlations have been established and commonly used to estimate the undrained shear strength of normally consolidated clays in geotechnical practice. However, there are still many contradictory cases regarding the validity of these correlations, so their applicability and reliability are questionable. In this study, an extensive geotechnical database for normally consolidated clays has been compiled. Next, a Bayesian nonparametric method is exploited to identify the most critical soil index properties in inferring the undrained shear strength and a new predictive model is proposed. Finally, the performance of the proposed predictive model is assessed and compared with two well-known correlations using an independent testing database. It confirms that the proposed model not only possesses high predictability, but also provides superior performance over other existing empirical correlations.     

Age and growth of Cape stumpnose Rhabdosargus holubi (Pisces: Sparidae) in the Eastern Cape,South Africa

Rhabdosargus holubi is a small (maximum weight=2.4?kg) yet important fishery species in the estuaries of the south-east coast of South Africa. Little is known of its biology and specifically its growth rate, which is essential for sustainable management of the fishery. We examined and counted the opaque zones in the sectioned otoliths of 134 R. holubi to determine its age and growth parameters. The otoliths from two recaptured fish marked with oxytetracycline confirmed that one opaque zone was deposited annually. The species reached a maximum age of 18 years and growth was adequately described by a von Bertalanffy growth function of the form: L_t = 358.1 (1 – e^{?0.24(t+0.77)}) mm fork length. There were no significant differences between any of the male and female growth parameters (likelihood ratio test: p = 0.3). The growth was slow (omega index: ω = 86.56); however, despite this, the unique life history of R. holubi may provide a degree of resilience to heavy fishing pressure in estuaries.     

基于无机成因的油气勘查概念模型(BRCF)

基于超基性岩蛇纹石化成油理论,根据构造条件和沉积条件,提出了石油勘查概念模型——"BRCF"模型:B代表侵入地壳超基性岩;R代表储油层;C代表盖层;F代表深大断裂。运用该模型分析了波斯湾地区油气田和中国典型油气田油气成藏规律,并预测了中国大陆油气勘查靶区。     

藏北羌塘中部日湾茶卡地区晚三叠世安山岩与闪长质包体岩石成因及地质意义

龙木错-双湖-澜沧江缝合带将羌塘板块划分为南、北2个次级板块,在缝合带两侧大规模发育晚三叠世岩浆作用,并伴随大量的高压超高压变质岩。在缝合带以南的日湾茶卡地区识别出一套安山岩,其中发育大量的暗色闪长质捕虏体,锆石U-Pb测年结果在安山岩中获得了364.7±1.9Ma和223.9±1.3Ma两组年龄信息,锆石原位Hf同位素测试结果εHf(t)分别为+7.22~+8.69和-5.94~-4.14。结合羌塘中部已有的研究成果,认为闪长质捕虏体形成于晚泥盆世洋壳俯冲背景,是地幔楔部分熔融底侵至地壳的产物;而安山岩形成于晚三叠世碰撞后伸展背景,是深部板片断离机制下深俯冲陆壳边缘一侧熔体混染晚泥盆世新生地壳的产物。安山岩中闪长质捕虏体的发现支持了俯冲带作为大陆生长的重要场所的观点。     

Effect of 2D spatial variability on slope reliability: A simplified FORM analysis

To meet the high demand for reliability based design of slopes, we present in this paper a simplified HLRF(Hasofere Linde Rackwitze Fiessler) iterative algorithm for first-order reliability method(FORM). It is simply formulated in x-space and requires neither transformation of correlated random variables nor optimization tools. The solution can be easily improved by iteratively adjusting the step length. The algorithm is particularly useful to practicing engineers for geotechnical reliability analysis where standalone(deterministic) numerical packages are used. Based on the proposed algorithm and through direct perturbation analysis of random variables, we conducted a case study of earth slope reliability with complete consideration of soil uncertainty and spatial variability.     

Electrical analogy for modelling thermal regime and moisture distribution in sandy soils

The soil mass is subjected to temperature variation due to several human activities (viz. tanks storing heated fluids, buried cables and pipelines, air-conditioning ducts, disposal of nuclear and thermal power plant wastes etc.), which result in heat-induced migration of the moisture in it. Though several studies have been conducted in the past to investigate the mechanism of heat migration through the soil mass, a methodology for ‘real-time measurement of the variations in temperature, flux and moving moisture front, in tandem, with respect to space' has rarely been attempted. In this context, extensive laboratory investigations were conducted to measure real-time flux and temperature variations in the sandy soils, and the validation of results has been done by employing an equivalent electrical circuit programme, LTspice. Subsequently, a mathematical model PHITMDS (i.e. Prediction of Heat-Induced Temperature and Moisture Distribution in Soil) has been developed and its utility and efficacy, for predicting the depth-wise temperature and heat-induced moisture migration, due to evaporation, in terms of position of moving moisture front in the sandy soil has been critically discussed and demonstrated.     

RS & GIS-based landslide susceptibility mapping of the Balason River basin,Darjeeling Himalaya,using logistic regression (LR) model

The present study deals with the preparation of a landslide susceptibility map of the Balason River basin, Darjeeling Himalaya, using a logistic regression model based on Geographic Information System and Remote Sensing. The landslide inventory map was prepared with a total of 295 landslide locations extracted from various satellite images and intensive field survey. Topographical maps, satellite images, geological, geomorphological, soil, rainfall and seismic data were collected, processed and constructed into a spatial database in a GIS environment. The chosen landslide-conditioning factors were altitude, slope aspect, slope angle, slope curvature, geology, geomorphology, soil, land use/land cover, normalised differential vegetation index, drainage density, lineament number density, distance from lineament, distance to drainage, stream power index, topographic wetted index, rainfall and peak ground acceleration. The produced landslide susceptibility map satisfied the decision rules and ?2 Log likelihood, Cox &; Snell R-Square and Nagelkerke R-Square values proved that all the independent variables were statistically significant. The receiver operating characteristic curve showed that the prediction accuracy of the landslide probability map was 96.10%. The proposed LR method can be used in other hazard/disaster studies and decision-making.