Radiocarbon redating of contaminated samples from a tropical volcano: the Mansion ‘Series’ of St Kitts,West Indies

Heavy rainfall and dense vegetation on tropical volcanoes produce abundant carbonized wood in pyroclastic deposits, in addition to easy contamination of this wood by root systems and soluble humic material. Because the physical nature of the charcoal varies, some samples are more prone to contamination. Two independent studies of the same volcano, Mt Liamuiga on St Kitts in the Lesser Antilles, sometimes using samples from the same carbonized tree, yielded a systematic difference in radiocarbon ages. An exchange of samples and a re-investigation of three physically distinct types of charcoal yielded the following results. Rare, hard, dense charcoal, lacking contamination, which had yielded a spurious age of 2860 years bp, was redated at 1845±58 years bp. Common soft, friable charcoal with good cellular structure proved to be susceptible to contamination. A field decontamination technique utilized by one group seems significant as it yields older ages than when only routine laboratory pre-treatment was used, indicating that the latter technique only partly removes the dried and hard residue produced by the decomposition of modern plant rootlets. A previous date of 24870 years bp obtained from powdery charcoal in a horizon beneath the Mansion Series contradicted ages older than 41000 years bp from common friable charcoal in the lower Mansion Series. The soft powdery charcoal was re-investigated using a sample collected a few centimeters from the original, although field decontamination of this sample was not possible, more extensive laboratory treatment yielded an age of ca. 43000 years bp, again proving that routine laboratory pretreatments are inadequate. A revised geochronology for the Mansion Series is described and a cautionary discussion is presented for the benefit of investigators using radiocarbon ages to date volcanic deposits.     

硅质碎屑砂岩中胶结物来源的新认识

分析了浅埋藏砂岩的成岩环境,并从岩石学、矿物学、同位素及质量平衡估算方面论证硅质碎屑砂岩中的胶结物主要来源于砂岩浅埋藏期间的地下水,进而分析浅埋藏带内地下水的流动机制及早期胶结作用对晚期成岩作用的影响。     

Automatic equipment to monitor groundwater radon

Prototype instrumentation, able to automatically measure groundwater radon content variations, is presented. The equipment is made of stainless steel and has spherical valves with automatic and pneumatic control. The deemanation of the gases from the water is obtained by evacuating a suitable expansion chamber. The instrumentation can make discrete sampling ranging from 1 per hour to 1 per 99 hours. The equipment was tested in the laboratory: the efficiency was measured by means of a²⁶⁶Ra solution. A mean value of (0.65±0.07) count/s/Bq was obtained. A calibration test was carried out by comparing countings from the automatic equipment with those obtained by the standard laboratory cell. Results of an operational check over a period of approximately one year indicate that variations in radon at the calibration site are attributable more to meteorological than to tectonic causes.     

地下水非稳定流的LTFAM算法

渗流域内应用拉普拉斯变换(LT)建立相应的有限分析(FAM)方程,顾及渗流域内地下水流的初始条件和边界条件,可在LT空间构成一个封闭的以水头像函数为变量的线性方程组。将此方程组所得的解,通过Stehfest数值反演公式,可归化为时间域的解(水头)。由于时间t被隐含在数值方程内,从而克服了传统数值法按时段(△t)逐步迭代的缺陷,提高了计算效率,也为用嵌入法建立地下水流管理模型提供了一条捷径。     

论四川盆地三叠系地下水水文地质条件

四川盆地三叠系地下水可划分出碎屑岩孔隙裂隙和碳酸盐岩岩溶裂隙两大储集类型。按此处构造开启程度和埋深条件等的不同,下中三叠统地下水有沉积变质水和渗入淋滤水两种基本成因类型,水动力特征各异。沉积变质水处于深埋封闭条件,受地静压力驱动控制;渗入淋滤水分布于背斜露头区和浅部地区,受静水压力驱动控制。并由此控制了盆地三叠系盐类的保存条件。     

Geochemistry and petrogenesis of the post-orogenic bimodal dyke swarms in NW Sinai, Egypt: constraints on the magmatic–tectonic processes during the late Precambrian

The study area in the northwest Sinai represents one of the most significant regions in the Egyptian basement intensely invaded by post-orogenic calc-alkaline dyke swarms. Two post-orogenic dyke swarms have been recognized in NW Sinai namely: (1) mafic dykes of basalt, basaltic andesite and andesite composition and (2) felsic dykes of dacite, rhyodacite and rhyolite composition. These basaltic to rhyolitic dykes intruded contemporaneously and shortly after the intrusion of the post-orogenic leucogranite. The mafic and felsic dykes are enriched in incompatible elements, especially in the large ion lithophile elements (e.g. K, Rb, Ba) and depleted in high field strength elements with negative P, Ti and Nb anomalies. Major and trace element geochemistry indicates that investigated mafic and felsic magma types are not related via fractional crystallization. The protoliths of the mafic and felsic dykes appear to have evolved from different parental magmas. The incompatible trace element patterns favour a derivation of the mafic dykes from melting of a garnet peridotite source followed by fractional crystallization of olivine, clinopyroxene amphibole and zircon. The felsic dykes, on the other hand, could be generated by melting of garnet-free source modified subsequently by fractional crystallization of plagioclase, apatite and titanomagnetite. This implies variable source characteristics at the end of the Pan-African in the NW Sinai.The mafic and felsic dykes can be related to an intracontinental setting and that this was accompanied by a chemical evolution of the subcontinental lithosphere. Magma generation and ascent in the area was favoured by extensional movements, which is already known from other areas in NE Africa.     

XANES analysis of the mechanisms of arsenic removal in biological iron and manganese treatment unit

Biological iron and manganese removal utilizing indigenous iron and manganese oxidizing bacteria （IRB hereafter） in groundwater can also be applied to arsenic removal according to our pilot-scale test. The arsenic removal probably occurred through sorption and complexation of arsenic to iron and manganese oxides formed by enzymic action of IRB. We investigated the chemical properties of iron and manganese oxides in IRB floc and the valence state of arsenic sorbed to the floc to clarify the mechanisms of the arsenic [especially As （Ⅲ）] removal. The floc samples were collected from two drinking water plants using IRB （Jyoyo and Yamatokoriyama, Japan）, and our pilot - scale test site where arsenic and iron removal using IRB is under way （Mukoh, Japan）. The Jyoyo and Yamatokoriyama IRB floc samples were subjected to As （Ⅲ） and As（Ⅴ） sorption experiments. The elemental composition of the floc samples was measured. XANES spectra were collected on As, Fe and Mn K-edges at synchrotron radiation facility Spring 8 （Hyogo, Japan）. FT-IR and the X-ray diffraction spectra of the samples were also obtained. The IRB floc contained ca. 35 % Fe, 0.3%-3.5% Mn and 2%-6% P. The samples were highly amorphous and contained ferrihidrites and hydrated iron phosphate. According to XANES analyses of IRB, As associated with IRB was in ＋5 valence state when As （Ⅲ） （or As （Ⅴ）） was added in laboratory sorption test, Fe in ＋3 valence state, and Mn a mixture of＋3 and ＋4 valence states. Small shift was observed in the XANES spectra of IRB on As K-edge as the equilibration time of the sorption experiment was increased. Gradual oxidation of a small amount of As （Ⅲ） associated with IRB or change in arsenic binding with sorption site were the probable mechanism.     

Permeable Reactive Barrier for the treatment of contaminated surface water in Katedan industrial development area, Hyderabad, India

Permeable Reactive Barrier （PRB） is an emplacement of inert material （s） in the subsurface, designed to intercept a contaminated plume, provides a preferential flow path through the reactive media, and transforms the contaminant into environmentally acceptable forms to attain concentration remediation goals at the discharge of the barrier. The phenomena, which help in remediation within PRB, are adsorption/sorption, precipitation, oxidation/reduction and biodegradation. Various materials like zero-valent iron, zero-valent bi-metals, natural zeolites, organic carbon, fly ash, zeolites, limestone, activated alumina, apatites, etc. have been tried by many researchers to remove organic and inorganic contaminants. In USA, Canada, and many European countries commercial full-scale and pilot scale PRBs are successfully working. The design and installation of full scale PRBs needs laboratory treatability and dynamic flow column experiments？ The concept of PRB is being applied to treat contaminated surface water in the Katedan industrial area, Hyderabad, India. National Geophysical Research Institute （NGRI）, Hyderabad, India, conducted systematic studies in collaboration with Norwegian Geotechnical Institute （NGI）, Norway, to develop PRB technique to decontaminate the surface water pollution due to industrial effluent. A site assessment study in the Katedan Industrial Area, were carried out and water, soil and sediment from the lakes of the area were found to be polluted with high concentrations of heavy metals like As, Pb, Cr, Cd, Ni, etc. Adsorption studies at NGRI with synthetic samples and in-situ industrial effluent using different reactive media for removing contaminants like arsenic, chromium, cadmium, copper, nickel, lead and zinc have been carried out and yielded satisfactory results. The performance of zero-valent iron and limestone is encouraging in removing As,     

Heavy metal contamination in the sediment of the Second Songhua River

The Second Songhua River was subjected to a large amount of untreated effluent from petrochemical industries in Jilin City in the 1960s to the 1970s. The objectives of this study were to investigate the mercury and other heavy metal contamination in the sediment of the river. The river bottom sediment was sampled from the river segment between Jilin City to Haerbin City in 2005. Total concentrations of Hg, Cd, Cu, Cr, Pb, Zn, Ni, As, Sc, and major cations （A1, Fe, Mg, Ca, K, Na） in the sediment were measured by atomic fluorescence spectrometer, ICP-MS, and ICP-OES, respectively, following digestion with various acids. We found the concentrations of most elements in the uncontaminated sediment were significantly correlated to those of Sc.