煤矸石回填地基的环境效应研究

为了弄清楚煤矸石回填地基对复垦区的环境效应,以开滦矿区吕家坨复垦新村为例,介绍了地基回填煤矸石工艺,分析了煤矸石化学成分及其含量;采用室内淋溶实验,对pH、总硬度（CaCO3）、F^-、SO4^2-、Pb、Cd和Cr^6＋浓度等地下水环境质量指标进行分析,探讨了煤矸石回填地基对水环境的影响;讨论了煤矸石回填地基对大气质量的影响;参照《城市放射性废物管理办法》规定,评价了回填地基煤矸石的放射性对人体健康的危害。结果表明：通过现场振动压实试验确定了回填地基分层充填、分层振动压实参数及碾压趟数,确定按照煤矸石与土体积之比5：2进行回填,若回填一层厚500mm煤矸石,则要回填一层厚200mm粉煤灰或土,地表覆土厚度确定为0．5m;煤矸石中SiO2和Al2O3含量较高,属基性岩类,同时煤矸石含有炭、铝和CaO等物质,易发生水解和风化等现象;地基分层回填压实的复垦工艺减少了煤矸石中有害物质的释放量,降低了污染物的迁移速度,不会对水环境造成污染;地基回填煤矸石也显著减少粉尘和有害气体的排放量,降低对大气的污染;研究区煤矸石不属于放射性废物,不会影响人体健康,可作为建筑材料使用。     

太平庄井地下流体动态主要干扰因素研究

通过分析多年的观测资料，认为太平庄井地下流体动态的主要干扰因素为区域地下热水开采，其次为降雨。气压的明显变化对水位、水温也有一定干扰。区域开采造成太平庄井水位、水温同步下降，氢气测值升高；降雨导致太平庄井水位上升、水温下降。     

Groundwater contaminant source identification based on iterative local update ensemble smoother

Identification of the location and intensity of groundwater pollution source contributes to the effect of pollution remediation, and is called groundwater contaminant source identifcation. This is a kind of typical groundwater inverse problem, and the solution is usually ill-posed. Especially considering the spatial variability of hydraulic conductivity field, the identification process is more challenging. In this paper, the solution framework of groundwater contaminant source identification is composed with groundwater pollutant transport model (MT3DMS) and a data assimilation method (Iterative local update ensemble smoother, ILUES). In addition, Karhunen-Loève expansion technique is adopted as a PCA method to realize dimension reduction. In practical problems, the geostatistical method is usually used to characterize the hydraulic conductivity feld, and only the contaminant source information is inversely calculated in the identifcation process. In this study, the identification of contaminant source information under Kriging K-field is compared with simultaneous identification of source information and K-field. The results indicate that it is necessary to carry out simultaneous identification under heterogeneous site, and ILUES has good performance in solving high-dimensional parameter inversion problems.     

Effect of system variables and particle size on physical characteristics of air sparging plumes

Air was injected through a well in a thin transparent tank filled with saturated glass beads to study how the size and air saturation of air sparging plumes are affected by particle size and gradation; operational parameters such as injection pressure, well depth, injection pressure pulsing; and well outlet configuration. V-shaped air plumes with an apex between 40° and 60° were obtained for all tests. The air pressure required to initiate sparging agreed closely with the sum of the air entry pressure and the hydrostatic pressure, with higher initiation pressures required in the fine and well-graded beads. Higher air flow rates and air saturations were obtained in coarser beads at a given pressure, and the variation in flow rate was consistent with estimated air permeabilities. Peak average air saturations were 28–56% for the coarse-medium beads, 10% for the well-graded beads, and 8% for the fine beads. Air saturation and the radius of influence increased modestly (<40%) as the normalized injection pressure exceeded 0.1. Radius of influence increased by approximately a factor of two as the well depth increased, but leveled off once the ratio of radius of influence to well depth reached 0.60–1.05. Pulsing of injection pressure had no effect on the initiation pressure, air flow rate, or air saturation, but increased the size of the air plume and the radius of influence slightly (<15%). Well outlet configuration had only a slight affect the radius of influence (<10%), air saturation (<10%), or air flow rate (<12%). Dye testing showed that water surrounding the air plume circulated during continuous and pulsed sparging. However, pulsed sparging resulted in greater and more defined circulation of water within and adjacent to the air plume, which should reduce mass transfer limitations during sparging.     

黑龙江省三江平原地下水资源潜力与生态环境地质研究综述

黑龙江省三江平原地下水资源潜力与生态环境地质调查评价项目,是首批国土资源大调查项目之一。此项目已经完成,在水工环境方面取得了重要的成绩。本文对三江平原地下水资源潜力与生态环境地质进行了综合研究;提出了本次研究的目的任务及预期目标;对以往工作进行了评述;阐释了研究思路及主要研究方法;系统地总结了本次工作的成果;最后提出了下一步工作建议。     

一种真空预压区地下水位计算方法

根据抽真空时加固区内真空渗流场的形成机制和变化特点,把真空渗流场的形成过程分为非稳定渗流和稳定渗流两个阶段。利用渗流量计算公式,计算加固区内渗流量随时间变化过程曲线。结合两个阶段加固区地下渗流场的变化特性,分别利用Theis和Dupuit计算模型计算不同时刻的地下水位,并用实测进行验证。     

Magmatic History of Somma-Vesuvius on the Basis of New Geochemical and Isotopic Data from a Deep Borehole (Camaldoli della Torre)

A continuous-coring borehole recently drilled at Camaldoli dellaTorre on the southern slopes of Somma–Vesuvius providesconstraints on the volcanic and magmatic history of the Vesuvianvolcanic area since c. 126 ka BP. The cored sequence includesvolcanic units, defined on stratigraphical, sedimentological,petrological and geochemical grounds, emitted from both localand distal vents. Some of these units are of known age, suchas one Phlegraean pre-Campanian Ignimbrite, Campanian Ignimbrite(39 ka), Neapolitan Yellow Tuff (14· 9 ka) and VesuvianPlinian deposits, which helps to constrain the relative ageof the other units. The main rock types encountered are shoshonite,phonotephrite, latite, trachyte and phonolite. The sequenceincludes, from the base upwards: a thick succession of pyroclasticunits emplaced between 126 and 39 ka, most of them attributedto eruptions that occurred in the Phlegraean area; the CampanianIgnimbrite; the products of a local tuff cone formed between39 ka and the deposition of the products of the earliest activityof the Mt. Somma volcano; the products of the Somma–Vesuviusvolcano, which include from the base upwards a thick sequenceof lavas, pyroclastic rocks and the products of a local spattercone dated between 3· 7 ka and AD 79. The data obtainedfrom the study of the borehole show that, before the CampanianIgnimbrite eruption, low-energy explosive volcanism took placein the Vesuvian area, whereas mostly high-energy explosive eruptionscharacterized the Campi Flegrei activity. In the Vesuvian area,Campanian Ignimbrite deposition was followed by the eruptionof a local tuff cone and a long repose time, which predatedthe formation of the Mt. Somma edifice. Since 18· 3 ka(Pomici di Base eruption) the activity of Somma–Vesuviusbecame mostly explosive with rare lava effusions. The shallowestcored deposits belong to the Camaldoli della Torre cone, formedbetween the Pomici di Avellino and Pomici di Pompei eruptions(3· 7 ka–AD 79). New geochemical and Sr–Nd–Pb–B-isotopicdata on samples from the drilled core, together with those availablefrom the literature, allow us to further distinguish the volcanicrocks as a function of both their provenance (i.e. Phlegraeanor Vesuvian areas) and age, and to identify different magmaticprocesses acting through time in the Vesuvian mantle source(s)and during magma ascent towards the surface. Isotopically distinctmagmas, rising from a mantle source variably contaminated byslab-derived components, stagnated at mid-crustal depths (8–10km below sea level) where magmas differentiated and were probablycontaminated. Contamination occurred either with Hercynian continentalcrust, mostly during the oldest stages of Vesuvian activity(from 39 to 16 ka), or with Mesozoic limestone, mostly duringrecent Vesuvian activity. Energy constrained assimilation andfractional crystallization (EC-AFC) modelling results show thatcontamination with Hercynian crust probably occurred duringdifferentiation from shoshonite to latite. Contamination withlimestone, which is not well constrained with the availabledata, might have occurred only during the transition from shoshoniteto tephrite. From the ‘deep’ reservoir, magmas rosetowards a series of shallow reservoirs, in which they differentiatedfurther, mixed, and fed volcanic activity. KEY WORDS: Somma–Vesuvius; crustal contamination; source heterogeneity; radiogenic and stable isotopes; magmatic system     

利用水源热泵开采浅层地热能若干问题的探讨

地下水源热泵采能技术作为一种浅层低温地热能的可持续开发方式,在我国推广应用已有近十年的时间。尽管推广时间不长,但发展速度非常之快,尤其是近3～5年。由于多方面的原因,我国部分地下水源热泵采能工程逐渐暴露出一些问题,需要给予足够的重视。本文介绍了地下水源热泵采能系统的运行模式及特点,简要地对国内外热泵采能技术的应用现状进行了综述,并对该项技术在我国推广应用过程中存在的一些问题,进行了一定的分析和讨论。     

基于DPSIR模型的地下水饮用水源地安全评价指标体系研究

为系统客观的评价地下水饮用水源地的安全状态,基于“驱动力-压力-状态-影响-响应”(DPSIR)框架初步建立备选评价指标,运用专家咨询法对备选指标进行筛选及合理性检验,采用层次分析法确定指标权重,构建地下水饮用水源地安全度综合评价体系。以滹沱河浅层孔隙水水源地为例,确定了包含5个准则层,18个指标的地下水饮用水源地安全评价指标体系。滹沱河浅层孔隙水水源地实例研究表明,准则层中压力系统和状态系统所占权重较大,分别为0.257和0.339;水源地安全度为0.67,尽管处于较安全级别,但非常接近警戒值(0.4~0.6)。通过实例分析可知,筛选的指标具有一定的实用性,可以为评价浅层孔隙水水源地的安全状态及面临的风险提供参考。     

苏锡常地区浅层地下水开采技术研究及环境效应分析

通过在苏锡常地区选择典型地段进行浅层地下水开采试验工作,从浅层地下水水文地质条件(含水层展布、岩性、厚度、水质)综合分析其开发利用前景,提出了合理的浅层地下水开采方式及地下水的利用方向,对于保护深层水资源,防止地面沉降及土壤盐渍化有十分重要的意义。