西秦岭上白垩统红层空间分布及其对青藏高原东北缘隆升的地质约束

通过对西秦岭上白垩统红层地层基本沉积特征的研究和空间高程分布的定量化分析,讨论了西秦岭晚白垩世时期可能的构造地貌状态及西秦岭新生代以来地壳隆升的空间变化规律。取得如下认识:1根据西秦岭上白垩统底部洪积-冲积砾岩层之上普遍存在一套厚度不等的具有风成砂岩特征的红色中细粒砂岩和上部出现以泥岩、泥质粉砂岩为主的湖相沉积,结合现今多分布在不同水系分水岭之上,以及西秦岭中部宕昌-岷县-临潭断裂带两侧上白垩统红层地层顶面高程和底部角度不整合面高程没有显著差异分析,认为西秦岭无论在晚白垩之前经历了何种构造过程,晚白垩世具有整体稳定的泛沙漠-湖盆的古构造地貌状态,且断裂带不具备控制上白垩统沉积的构造边界性质;2现今离散型分布在西秦岭的上白垩统沉积地层反映的原型盆地不是孤立的、受区域断裂控制的山间盆地,而是统一的泛沙漠-内陆湖盆,现今的离散型分布是新生代以来地壳不均匀隆升和侵蚀的结果;3西秦岭上白垩统底部的角度不整合面产状,虽然由于后期构造变动呈非完全水平状态,但总体产状平缓。从大区域尺度分析,可以近似看做原始近水平的古地貌面。通过对该角度不整合面高程信息提取和模拟分析,结果表明,其高程分布具有从南西到北东、从北西到南东逐渐降低,穿越区域断裂带没有显著梯度变化,指示了西秦岭新生代以来的隆升具有整体性和隆升幅度呈连续梯度变化的特征。这可能指示了西秦岭新生代以来的地壳隆升机制主要不是上地壳挤压逆冲缩短,而是在印度板块-欧亚板块碰撞汇聚的动力学背景下,下地壳或上地幔自西南向北东连续流变逐渐增厚,造成了青藏高原东北缘呈向北东突出的弧形扩展隆升。     

Prediction of Seaward Slope Recession in Berm Breakwaters Using M5' Machine Learning Approach

In the design process of berm breakwaters, their front slope recession has an inevitable rule in large number of model tests, and this parameter being studied. This research draws its data from Moghim’s and Shekari’s experiment results. These experiments consist of two different 2D model tests in two wave flumes, in which the berm recession to different sea state and structural parameters have been studied. Irregular waves with a JONSWAP spectrum were used in both test series. A total of 412 test results were used to cover the impact of sea state conditions such as wave height, wave period, storm duration and water depth at the toe of the structure, and structural parameters such as berm elevation from still water level, berm width and stone diameter on berm recession parameters. In this paper, a new set of equations for berm recession is derived using the M5'' model tree as a machine learning approach. A comparison is made between the estimations by the new formula and the formulae recently given by other researchers to show the preference of new M5'' approach.     

Development of A Depth-Integrated Longshore Current Model with Unstructured Grids

A depth-integrated model for simulating wave-induced longshore current was developed with unstructured grids. Effects of surface roller and horizontal mixing under combined waves and currents were incorporated in the numerical model. Recommended values of model coefficients were also proposed based on sensitivity analysis. Field observations and three series of laboratory measurements including two cases conducted on the plane beach and one implemented on the ideal inlet were employed to examine the predictive capability of this model. For the field case and laboratory cases conducted on the plane beach, numerical results were compared favorably with the measured data. For the case with an ideal inlet, simulated circulation pattern is supposed to be reasonable although some deviations between numerical results and measured data still can be detected.     

Laboratory Study for Influence of Clay Content (CC) on Wave-Induced Liquefaction in Marine Sediments

In this artice, the influence of clay content on the wave-induced liquefaction in marine sediments was reported. The one-dimensional (1-D) equipment was setup with a vertical cylinder and 1.8–m–thick clayey sandy deposit and 0.2–m–thick water above the deposit. Unlike the previous experimental study for a single soil layer, this study used sand-kaolin mixtures, sand-illite mixtures, and sand-bentonite mixtures as the experimental samples. A series of experiments with 3,000 wave cycles in each test were conducted under numerous wave and soil conditions, which allowed us to examine the influence of clay content (CC) on wave-induced liquefaction in marine sediments. The experimental results showed that the clayey sandy deposit will become prone to liquefaction with the increase of CC when CC is less than a critical value, which depends on the type of clay. However, when CC is greater than the critical value, liquefaction depth will decrease as CC increases. Furthermore, when the CC value reaches a certain level, liquefaction will not occur. For example, no liquefaction occurs when CC ≥ 33% for both kaolin-sand and illite-sand mixtures and CC ≥ 16.36% for bentonite-sand mixtures.     

Study on Longitudinal Deformation Profile of Rock Mass in a Subsea Tunnel

During tunnel excavation, the deformation of surrounding rock due to the unloading of rock mass will vary with time. However, the measured displacement of surrounding rock is only a part of the actual longitudinal deformation profile. There is a need to analyze the longitudinal deformation profile to identify the deformation state and evaluate the stability of surrounding rock mass. In the present article, the variation of pre-deformation of surrounding rock due to excavation was analyzed, and the release coefficient was obtained from the measured results. For the Qingdao subsea tunnel, the measured crown settlement of surrounding rock was analyzed using the regression analysis method, and the longitudinal deformation profile of rock mass was simulated using the numerical calculation method. Moreover, based on the conditions of the subsea tunnel, a solid-fluid coupling model test was carried out to check the reliability of the numerical calculation results. The results of the model test were consistent with the numerical calculation results.     

Nonparametric Estimation of Undrained Shear Strength for Normally Consolidated Clays

For decades, various well-known empirical correlations have been established and commonly used to estimate the undrained shear strength of normally consolidated clays in geotechnical practice. However, there are still many contradictory cases regarding the validity of these correlations, so their applicability and reliability are questionable. In this study, an extensive geotechnical database for normally consolidated clays has been compiled. Next, a Bayesian nonparametric method is exploited to identify the most critical soil index properties in inferring the undrained shear strength and a new predictive model is proposed. Finally, the performance of the proposed predictive model is assessed and compared with two well-known correlations using an independent testing database. It confirms that the proposed model not only possesses high predictability, but also provides superior performance over other existing empirical correlations.     

深水稀井区天然气藏储盖组合定量预测方法研究:以琼东南盆地陵水凹陷为例

南海北部油气勘探表明天然气是本地区主要的资源类型。与石油相比,天然气藏的形成对盖层要求更为严格,因此开展天然气藏储盖组合研究对油气勘探具有重要意义。通过统计和调研的方法,将砂岩储层孔隙度12%定义为琼东南盆地天然气有效储层评价的下限参数,将泥岩排替压力1 MPa定义为天然气有效泥岩盖层评价的下限参数。利用测井资料开展了单井天然气藏储盖组合窗口定量预测,得出陵水凹陷W22-1井发育单个天然气藏储盖组合窗口。在此基础上,针对稀井或无井区,提出了基于地震反演速度剖面的天然气藏储盖组合定量预测方法,以琼东南盆地陵水凹陷主洼过井测线为例,开展了天然气藏储盖组合窗口地震预测,确定出该凹陷主洼发育单个天然气藏储盖组合窗口,大体上包括陵水组-莺歌海组上部多套地层,拓宽了陵水凹陷天然气勘探层系。这种方法对其它深水区和低勘探新区均有借鉴意义。     

基于无机成因的油气勘查概念模型(BRCF)

基于超基性岩蛇纹石化成油理论,根据构造条件和沉积条件,提出了石油勘查概念模型——"BRCF"模型:B代表侵入地壳超基性岩;R代表储油层;C代表盖层;F代表深大断裂。运用该模型分析了波斯湾地区油气田和中国典型油气田油气成藏规律,并预测了中国大陆油气勘查靶区。     

Effect of 2D spatial variability on slope reliability: A simplified FORM analysis

To meet the high demand for reliability based design of slopes, we present in this paper a simplified HLRF(Hasofere Linde Rackwitze Fiessler) iterative algorithm for first-order reliability method(FORM). It is simply formulated in x-space and requires neither transformation of correlated random variables nor optimization tools. The solution can be easily improved by iteratively adjusting the step length. The algorithm is particularly useful to practicing engineers for geotechnical reliability analysis where standalone(deterministic) numerical packages are used. Based on the proposed algorithm and through direct perturbation analysis of random variables, we conducted a case study of earth slope reliability with complete consideration of soil uncertainty and spatial variability.     

Electrical analogy for modelling thermal regime and moisture distribution in sandy soils

The soil mass is subjected to temperature variation due to several human activities (viz. tanks storing heated fluids, buried cables and pipelines, air-conditioning ducts, disposal of nuclear and thermal power plant wastes etc.), which result in heat-induced migration of the moisture in it. Though several studies have been conducted in the past to investigate the mechanism of heat migration through the soil mass, a methodology for ‘real-time measurement of the variations in temperature, flux and moving moisture front, in tandem, with respect to space' has rarely been attempted. In this context, extensive laboratory investigations were conducted to measure real-time flux and temperature variations in the sandy soils, and the validation of results has been done by employing an equivalent electrical circuit programme, LTspice. Subsequently, a mathematical model PHITMDS (i.e. Prediction of Heat-Induced Temperature and Moisture Distribution in Soil) has been developed and its utility and efficacy, for predicting the depth-wise temperature and heat-induced moisture migration, due to evaporation, in terms of position of moving moisture front in the sandy soil has been critically discussed and demonstrated.