冻土蠕变的渐进屈服准则

基于冻土蠕变的现象分析表明，冻土蠕变的破坏是由于冻土中非弹性变形积累的结果，在冻土的任何变形阶段都存在着非弹性变形。非弹性变形的积累在一定条件下导致了冻土渐进屈服的出现，渐进屈服反过来又促进了冻土蠕变的进一步增加。     

陆源碎屑沉积作用对化学元素配分的制约——兼论五台地区前寒武纪碎屑沉积岩示踪源区陆壳成分的意义

为探讨粒度分选沉积作用对沉积物化学成分配分的影响,对比研究了五台群中石英岩、长石石英岩、粉砂岩和粘土岩等不同粒度沉积岩的化学成分特征,结果表明:不同粒度沉积岩的主元素及微量元素均具有较大的变化范围,SiO_2与Al_2O_3及TFe_2O_3之间呈线性负相关关系,这种负相关关系还表现在SiO_2与REE,Rb,Sr之间,这种特征可以用石英的稀释作用进行解释;铁族元素Cr,Ni,Co和REE,Rb,Sr等大离子亲石元素与Al_2O_3呈正相关关系,表明这些元素易在富铝的粘土岩中聚积。不同粒度成分沉积岩的稀土     

渭河河谷甘肃段水资源承载能力分析

本文在论述渭河河谷甘肃段水资源分布特点及现状利用量和承载量的基础上,分析了水资源的承栽能力,认为区内水资源最佳承载量是355万人,355亿元工业产值和248.5万亩的可灌高效农田.据此提出了城市发展规模的大小,目的是供地方政府规划参考.     

表生风化作用下多年冻土土壤的理论粒径分布

The paper discusses the distinctive features of grain size distribution of permafrost soils formed under conditions of continental lithogenesis and cryogenic weathering of rocks. As a functional consequence of surface erosion of mineral particles, the log-normal distribution of the density function of grain size is derived confirmed for any conditions and sediment types.     

Analysis of parameters of ground vibration produced from bench blasting at a limestone quarry

The aim of this study is to predict peak particle velocity level at a limestone quarry located in Istanbul, Turkey. The ground vibration components were measured for 73 blast events during the bench blast optimization studies during a long period. In blasting operations; ANFO (blasting agent), gelatine dynamite (priming) and NONEL detonators (firing) were used as explosives at this site. Parameters of scaled distance (charge quantity per delay and the distance between the source and the station) were recorded carefully and the ground vibration components were measured by means of vibration monitors for every event. Then, the data pairs of scaled distance and particle velocity were analyzed. The equation of scaled distance extensively used in the literature was taken into consideration for the prediction of peak particle velocity. At the end of statistical evaluations, an empirical relationship with good correlation was established between peak particle velocity and scale distance for this site. The established relationship and the results of the study are presented.     

A hybrid method for size characterization of coarse subsurface fluvial sediments

This paper introduces and evaluates a novel method for ascertaining the grain‐size distribution of subsurface sediments that involves profoundly less sampling effort than standard methods. It is based on hybrid sampling principles previously applied to the construction of synthetic surface grain‐size distributions. The method is developed from an empirical demonstration of the approximate similarity of surface and subsurface grain‐size distributions when compared over a common range of sizes. Subsurface hybrid models are found to provide good facsimiles of grain‐size distributions de?ned using standard criteria and to yield distribution percentiles with millimetre accuracy. The technique is presented as an expedient alternative to standard methods for large, perennial gravel‐bed rivers. As this is a new technique, prudent application is advised in lieu of further investigation. Copyright © 2004 John Wiley & Sons, Ltd.     

Discovery and analysis of ultra-micro grinding grain texture in slipping lamellae of ductile-brittle zone

In the 1990s of the 20th century, we participated in the research of the stress field in fissure tectonics of scientific deep bore cores for the Deep Observation and Sampling of the Earths Continental Crust (DOSECC for short). Spherical and enriched ul-tra-micro granular textures (nm size), which enriches Nb element (Wang & Sun, 1990; Sun & Wang, 1993)[1,2], were found during the observation of ul-tra-micro slipping lamellae of ductile and brittle oc-curring in Late Mesozoic granites us…     

某滑坡软弱夹层抗剪强度取值方法的研究

文章主要针对软弱夹层抗剪强度取值所存在的争议，通过对贵州新街子滑坡的软弱夹层分别选择比例极限、屈服极限及峰值作为剪应力值，采用最小二乘法获得比例抗剪强度、屈服抗剪强度和峰值抗剪强度。以参数选取中应用较为成熟的反分析方法推求力学性质参数c、φ值作为判据对以上3种参数进行比较。计算结果表明：本滑坡软弱夹层中由于含泥量较大，而且粘塑性较强，屈服抗剪强度和反分析得到的抗剪强度偏差最小，比例抗剪强度偏差最大，峰值抗剪强度居中。并以此3种抗剪强度进行天然状态下滑坡稳定性验算，结果表明选用比例极限抗剪强度与当前滑坡的地质现象不符，选用峰值极限抗剪强度安全储备较低，而选取屈服极限抗剪强度最为合理。用此参数进行设计，滑坡已经得到了良好的治理。在取值研究中认为采用试验与反分析相结合的方法确定滑坡稳定性计算参数是比较合理的。以上结论为滑坡中软弱夹层抗剪强度取值的选择提供了重要的依据。     

水布垭面板堆石坝的三维弹塑性数值分析研究

在建的清江水布垭面板堆石坝高达233 m,是目前同类坝型中最高的.采用MSC.Marc非线性有限元程序,发展了三维子模型法,对该坝进行了三维弹塑性有限元仿真分析,模拟了面板的分缝、坝体材料分区、填筑及蓄水过程,采用双屈服面弹塑性模型模拟堆石体的变形特征.根据数值分析的结果,对坝体和面板的应力变形分布规律进行了探讨.     

碎屑流沿坡面运动的初步分析

本文分析了碎屑流沿坡面下滑过程中的运动特性,重点考察了床面摩擦系数、土体内摩擦角和坡角对碎屑流堆积形态的影响.