Statistical performance analysis of seismic‐excited structures with active interaction control

This paper presents a statistical performance analysis of a semi‐active structural control system for suppressing the vibration response of building structures during strong seismic events. The proposed semi‐active mass damper device consists of a high‐frequency mass damper with large stiffness, and an actively controlled interaction element that connects the mass damper to the structure. Through actively modulating the operating states of the interaction elements according to pre‐specified control logic, vibrational energy in the structure is dissipated in the mass damper device and the vibration of the structure is thus suppressed. The control logic, categorized under active interaction control, is defined directly in physical space by minimizing the inter‐storey drift of the structure to the maximum extent. This semi‐active structural control approach has been shown to be effective in reducing the vibration response of building structures due to specific earthquake ground motions. To further evaluate the control performance, a Monte Carlo simulation of the seismic response of a three‐storey steel‐framed building model equipped with the proposed semi‐active mass damper device is performed based on a large ensemble of artificially generated earthquake ground motions. A procedure for generating code‐compatible artificial earthquake accelerograms is also briefly described. The results obtained clearly demonstrate the effectiveness of the proposed semi‐active mass damper device in controlling vibrations of building structures during large earthquakes. Copyright © 2003 John Wiley & Sons, Ltd.     

Predictive instantaneous optimal control of elastic structures during earthquakes

A predictive instantaneous optimal control (PIOC) algorithm is proposed for controlling the seismic responses of elastic structures. This algorithm compensates for the time delay that happens in practical control applications by predicting the structural response over a period that equals the time delay, and by substituting the predicted response in the instantaneous optimal control (IOC) algorithm. The unique feature of this proposed PIOC algorithm is that it is simple and at the same time compensates for the time delay very effectively. Numerical examples of single degree of freedom structures are presented to compare the performance of PIOC and IOC systems for various time delay magnitudes. Results show that a time delay always causes degradation of control efficiency, but PIOC can greatly reduce this degradation compared to IOC. The effects of the structure's natural periods and the choice of control gains on the degradation induced by the time delay are also analyzed. Results show that shorter natural periods and larger control gains are both more sensitive and more serious to the degradation of control efficiency. Finally, a practical application of PIOC is performed on a six‐story moment‐resisting steel frame. It is demonstrated that PIOC contributes significantly to maintain stability in multiple degree of freedom structures, and at the same time PIOC has a satisfactory control performance. Copyright © 2003 John Wiley & Sons, Ltd.     

A hybrid indirect boundary element—discrete wave number method applied to simulate the seismic response of stratified alluvial valleys

A hybrid indirect boundary element – discrete wavenumber method is presented and applied to model the ground motion on stratified alluvial valleys under incident plane SH waves from an elastic half-space. The method is based on the single-layer integral representation for diffracted waves. Refracted waves in the horizontally stratified region can be expressed as a linear superposition of solutions for a set of discrete wavenumbers. These solutions are obtained in terms of the Thomson–Haskell propagators formalism. Boundary conditions of continuity of displacements and tractions along the common boundary between the half-space and the stratified region lead to a system of equations for the sources strengths and the coefficients of the plane wave expansion. Although the regions share the boundary, the discretization schemes are different for both sides: for the exterior region, it is based on the numerical and analytical integration of exact Green's functions for displacements and tractions whereas for the layered part, a collocation approach is used. In order to validate this approach results are compared for well-known cases studied in the literature. A homogeneous trapezoidal valley and a parabolic stratified valley were studied and excellent agreement with previous computations was found. An example is given for a stratified inclusion model of an alluvial deposit with an irregular interface with the half-space. Results are displayed in both frequency and time domains. These results show the significant influence of lateral heterogeneity and the emergence of locally generated surface waves in the seismic response of alluvial valleys.     

Sliding fragility of block‐type non‐structural components. Part 1: Unrestrained components

Motivated by the development of performance‐based design guidelines with emphasis on both structural and non‐structural systems, this paper focuses on seismic vulnerability assessment of block‐type unrestrained non‐structural components under sliding response on the basis of seismic inputs specified by current seismic codes. Two sliding‐related failure modes are considered: excessive relative displacement and excessive absolute acceleration. It is shown that an upper bound for the absolute acceleration response can be assessed deterministically, for which a simple yet completely general equation is proposed. In contrast, fragility curves are proposed as an appropriate tool to evaluate the excessive relative displacement failure mode. Sample fragility curves developed through Monte‐Carlo simulations show that fragility estimates obtained without taking into account vertical base accelerations can be significantly unconservative, especially for relatively large values of the coefficient of friction. It is also found that reasonable estimates of relative displacement response at stories other than the ground in multistorey buildings cannot in general be obtained by simply scaling the ground acceleration to the peak acceleration at the corresponding storey. Failure modes considered in this study are found to be essentially independent of each other, a property that greatly simplifies assessment of conditional limit states. Copyright © 2002 John Wiley & Sons, Ltd.     

基于关系数据库的邻接域处理

本文就跨图幅的地物(邻接域)的管理问题作了一些有益的探讨，为了达到有效管理这个目的，本文采用Oracle公司提供的空间数据插件Spatial将空间数据和属性数据存入Oracle数据库中，这样不仅可以通过标准SQL语句可下裁任意区域的数据，而且数据库还会自动维护数据的完整性。因此，用空间数据库的管理方式使邻接域问题就不存在了。     

Technology and Its Application： MIS with Geographical Information

Despite the constant expansion of the application of GIS, in recent years, the data process-ing ability of the application system developed with GIS_Tool is quite limited. Management information system with the geographical information can not only be used to deal with data commonly, but also deal with digitized maps as GIS_Tool does. Thus it can help the user develop an application system high-qual-ified both in maps and traditional data. This paper, by taking the method of integrated MapInfo in the application of Visual Basic as an example, mainly illustrates two technological problenm-integrated map technology and the multiuserization of Maplnfo geographical information. And also the concrete solu-tions to the problems are provided.     

偏心结构非线性地震反应分析的一种简化方法

本文建立了基于结构状态方程和偏心结构体系的层剪力-扭矩等效屈服EYST面概念的求解平扭耦联非线性地震反应的分离-予估-修正递推算法，编制了相应的计算程序。通过与三个单层偏心结构模型的破坏性地震模拟试验结果的对比，验证了小变形阶段平-扭耦联地震反应算法的实用性和可靠性。算例表明，该程序数据处理量小，运算快捷，便于应用。     

两结构高效阻尼控制体系试验研究

本文通过模拟地震动振动台试验，研究了两个相邻结构模型的地震响应，结构模型采用一种高效阻尼装置(High Efficient Damper for Multi—Structure System即HEDMS)连接。非线性时程分析与振动台试验结果都证明了该阻尼装置能高效发挥软钢阻尼器的耗能能力，从而显著减轻两结构模型的地震响应。同时，研究还指出了进行阻尼装置设计时应该注意的一些问题。     

团树断层场地地震反应的数值模拟

团树断层场地在多次地震中出现了烈度异常。为了弄清烈度异常的原因，应用显式有限元方法，数值模拟了在脉冲地震波斜入射情形下断层场地的地震反应。结果表明：在基岩山脚附近土层场地地震动放大比基岩山区平均高4倍、比远离基岩山脚土层场地平均高2倍，与历史震害分布有较好的对应。     

强震观测建筑结构的地震反应分析

选择取得强震观测资料的建筑结构为研究对象，采用有限元法建立结构的动力反应分析模型，利用SAP2000程序分析了结构的地震反应，并同实际记录到的结构地震反应进行了对比分析，讨论了结构模型参数估计和一些不确定因素对模型精度的影响。