Decomposition analysis on direct material input and dematerialization of mining cities in Northeast China

Material dematerialization is a basic approach to reduce the pressure on the resources and environment and to realize the sustainable development. The material flow analysis and decomposition method are used to calculate the direct material input (DMI) of 14 typical mining cities in Northeast China in 1995-2004 and to analyze the demateri-alization and its driving factors in the different types of mining cities oriented by coal, petroleum, metallurgy and multi-resources. The results are as follows: 1) from 1995 to 2006, the increase rates of the DMI and the material input intensity of mining cities declined following the order of multi-resources, metallurgy, coal, and petroleum cities, and the material utilizing efficiency did following the order of petroleum, coal, metallurgy, and multi-resources cities; 2) during the research period, all the kinds of mining cities were in the situation of weak sustainable development in most years; 3) the pressure on resources and environment in the multi-resources cities was the most serious; 4) the petro-leum cities showed the strong trend of sustainable development; and 5) in recent years, the driving function of eco-nomic development for material consuming has continuously strengthened and the controlling function of material utilizing efficiency for it has weakened. The key approaches to promote the development of circular economy of min-ing cities in Northeast China are put forward in the following aspects: 1) to strengthen the research and development of the technique of resources' cycling utilization, 2) to improve the utilizing efficiency of resources, and 3) to carry out the auditing system of resources utilization.     

德州市临盘采油区地面沉降监测

济南市的鹊山上设立了3块岩层水准标石的原点组。使用美国Tri mble Di Ni 12电子水准仪和条码式铟钢水准标尺施测一等精密水准82.2 km,二等精密水准30.8 km,联测各类水准点35个。对观测结果进行统计与分析表明,在临盘采油区(以后仓西北采油四队LY18为中心)形成了一个较明显的沉降区域,年沉降量为54.3 mm。建议在其周边增埋地面观测标石,进行加密观测,以掌握其变化规律。     

基于ArcSDE的地理数据入库技术研究

分析了GIS开发中空间数据的导入原理和技术,提出了一种基于ArcSDE的自建命令,实现了一种简单高效的空间数据入库方法。     

使用Python函数式编程进行空间回归分析

针对使用传统的编程方式进行空间回归分析过于繁杂的问题,本文提出将Python函数式编程引入空间回归分析方法,分析和探讨脚本语言＋函数式编程方式在GIS数据分析中的推广应用前景。编程实践证明,采用Python函数式编程,结合既有的开源软件包,可以有效提高编程效率,减少代码量,将实践人员的注意力集中在问题本身。     

空间数据挖掘进展

空间数据挖掘是解决海量空间数据利用瓶颈的技术之一。本文综述空间数据挖掘的研究与应用进展。首先,分析空间数据挖掘的缘起。其次,研究空间数据挖掘的本质及其特点。再次,基于理论技术,分类总结空间数据挖掘的研究和应用的成果,并探讨其研究方向。最后,总结全文。     

Numerical modelling of deep sea air-lift

Deep sea air-lifting of solid particles from depth of 1600 m is simulated with a mathematical model of the three-phase flow in an upward pipe. The computations are carried out for an axisymmetric domain in a transient way. Phase distributions, pressure and velocity profiles together with flow rates for all phases are presented and analysed. The influence of the pipe diameter on the air-lift efficiency was studied for air-lift pipes of different lengths and found to be significant. The lifting efficiency increases with the increase of the pipe diameter due to the reduction of the wall friction influence on the flow. In addition, the efficiency also increases with the increase of the solid particles volume fraction at the inlet. The presented numerical model can be utilized during various stages of the design of the air-lift pumps to help answer fundamental questions on the process, and during their operation to select optimal process parameters and to address possible problems.     

Impact Compressive Creep Characteristics of Simulative Soil for Deep-Sea Sediment

The impact load (equivalent impact height) applied to deep-sea sediment by a walking mining machine was first deduced by the energy conservation principle, and the simulative soil was prepared based on the deep-sea sediment collected from the Pacific C-C mining area. The self-designed impact compressive creep tests of the simulative soil were conducted under different ground stresses and impact heights, in order to determine impact compressive creep parameters using a K-H rheological model. Test results show that the impact compressive creep curves have three similar creep stages (transient creep, unstable creep, and stable creep) to static compressive creep curves, where the transient creep deformation and total deformation at the unstable creep stage decrease with the impact load. Among the three impact compressive creep parameters (K₁, K₂, β) of the simulative soil, K₁ is first increased with impact height and finally fluctuated to a certain stable value, while K₂ and β are approximately linearly increased with impact height. The maximum subsidence of the mining machine under a specific designed ground stress and walking velocity predicted by the impact compressive creep constitutive equation can be used for safety assessment of the mining machine.     

履带式深海采矿车软底质行走性能分析

海底底质的物理力学参数不同于陆地土壤,其极低的抗剪强度和承压强度对深海采矿车的行走性能提出高要求。分析基于车辆地面力学理论,开展了底质土力学特性试验研究,建立了深海底质力学模型。根据深海重载作业采矿车样机结构参数,在大型动力学仿真软件Recurdyn中建立了仿真模型。通过直线行走多体动力学仿真与直线行走海试试验的对比,验证了仿真模型的准确性。在此基础上开展了采矿车样机在深海软底质上的多种行走工况动力学仿真,分析与评价其行走性能。结果表明,采矿车样机可以顺利完成转弯、爬坡、越障等基本功能。该研究成果可为深海采矿车海底行走性能评估提供理论参考,为深海采矿车和软底质的相互作用力学研究提供借鉴。     

尼泊尔地震的NOAA卫星数据震前异常分析

发生地震时常伴随有地热辐射增强现象,这些异常信息隐藏于遥感卫星NOAA所捕获的地球射出长波辐射（OLR）数据中,目前多数研究还停留在对源数据的解读,缺乏有效的信息处理技术,致使大部分的OLR数据没有得到充分利用。因此,本文提出一种基于鞅理论的概率统计方法来识别异常特征算法,从有噪声的非结构化的源数据中提取出震前OLR数据异常变化特征序列,从时间序列和地域范围进行震前异常分析。本算法实验是以尼泊尔的在2014年9月至2015年7月期间（包括2015年4月25日Ms7.8大地震）发生的3次地震的OLR数据为例,实验结果显示震中区域的OLR数据在震前的2~3个月开始有显著的异常数据变化,通过分析发现数据显示数据异常在震前出现的时间长短与地震的大小相关,异常的发生区域与震区周围的地貌特征相关。这说明基于鞅理论的算法所提取的OLR数据异常点序列的确与地震发生的时间地点是有关系的。     

矿山人均保有储量:我国金属矿山合理经济开发的一个标量

文章分析对比了我国国有及非国有规模以上矿山企业的主要经济指标,认为矿业开发要走可持续发展的途径,促进矿产资源的充分、合理、有效开发,实现满足市场需求、兼顾环境保护和社会稳定的目标,就必须积极探索和慎重考虑矿山企业从业人数的合理控制问题;依据胶东大型金矿山实际资料的初步分析,明确提出"矿山人均保有储量"是制约矿山合理开发和矿业可持续发展的重要指标;矿山人均储量的合理配置和适度调控问题不仅值得进一步研究,而且应该引起有关部门的广泛注意和高度重视.