GPS进行长边控制测量分析

采用基准和基准转换模型的不同会导致GPS观测边长与坐标计算边长不一致。因此由GPS测量的WGS－84坐标系向我国的北京54坐标系转换计算时，应尽可能选择参考点作对比分析。若满足精度要求，可采用全国精密参数作转换计算，若不能满足精度要求或达不到实测点的定位精度，可先将边长作高程异常改正，再对起算点作方位改正。     

海南岛农业地貌

本文在充分消化前人已有资料的基础上,论述了海南岛的主要地貌类型与地貌轮廓,阐明了海南岛地貌形成的条件与过程、地貌对农业生产的影响及农业地貌分区。     

Multi‐objective optimal design of FLC driven hybrid mass damper for seismically excited structures

Structural vibration control using active or passive control strategy is a viable technology for enhancing structural functionality and safety against natural hazards such as strong earthquakes and high wind gusts. Both the active and passive control systems have their limitations. The passive control system has limited capability to control the structural response whereas the active control system depends on external power. The power requirement for active control of civil engineering structures is usually quite high. Thus, a hybrid control system is a viable solution to alleviate some of the limitations. In this paper a multi‐objective optimal design of a hybrid control system for seismically excited building structures has been proposed. A tuned mass damper (TMD) and an active mass driver (AMD) have been used as the passive and active control components of the hybrid control system, respectively. A fuzzy logic controller (FLC) has been used to drive the AMD as the FLC has inherent robustness and ability to handle the non‐linearities and uncertainties. The genetic algorithm has been used for the optimization of the control system. Peak acceleration and displacement responses non‐dimensionalized with respect to the uncontrolled peak acceleration and displacement responses, respectively, have been used as the two objectives of the multi‐objective optimization problem. The proposed design approach for an optimum hybrid mass damper (HMD) system, driven by FLC has been demonstrated with the help of a numerical example. It is shown that the optimum values of the design parameters of the hybrid control system can be determined without specifying the modes to be controlled. The proposed FLC driven HMD has been found to be very effective for vibration control of seismically excited buildings in comparison with the available results for the same example structure but with a different optimal absorber. Copyright © 2002 John Wiley & Sons, Ltd.     

柴达木北缘中生代盆地的成因类型及构造沉积演化

柴达木盆地是我国西部一个大型中新生代陆相含油气盆地。其剖面结构、构造样式、沉积特征、基底沉降、古地温等表明中生代盆地的性质应为挤压环境下经过多次幕式逆冲形成的、也祁连造山带有关的叠置前陆盆地，经历了早株罗世的破裂前陆盆地和中株罗世之后的类前陆盆地的演化过程。柴达缘中生代沉积充填由构造层序I（早株罗世）、构造层序Ⅱ（中侏罗世）和构造层序Ⅲ（晚侏罗世）三个完整的构造层序构成，由粗到细多个沉积旋回代表了逆冲加载过程中由活动期到平静期的转化过程。随着逆冲活动的加强和频率加快，构造层序Ⅳ（白垩纪）只经历逆冲活动期，是不完整的构造层序，发育补偿和过补偿沉积，盆地逐渐萎缩。     

遗传算法在边坡数值计算中的应用

改进了进化方向的遗传算法与有限元数值法，结合并研制了相应的软件。应用该软件对多类型岩土边坡进行弹性模量、内聚力、内摩擦角等参数反演分析，显示误差很小，收敛速度也很快，这说明改进进化方向遗传算法这种新型的优化算法在多类型岩土参数优化估计中具有独特的优势。     

河南南召水洞岭铜铅锌矿床地质特征及成因分析

通过地质详查和综合研究相结合的手段 ,从水洞岭铜铅锌矿床的地质特征入手 ,分析矿床成因 ,提出矿床属海相火山喷发沉积 -弱改造型的成因观点     

燕山东段地区与花岗岩有关的几个问题探讨

详细研究了燕山东段地区花岗岩类的侵入时代、产出形式和成因类型 ,指出该区与花岗岩有关的三个金属成矿系列。     

中国煤系高岭岩(土)资源成矿机理与开发利用

中国含煤地层中高岭岩（土）分布广泛，成矿时代多，成因复杂，储量丰富，质地优良，是一种重要的自然资源和非金属矿产，具有极高的开发利用价值，在全世界独具特色。本文研究了中国煤系高岭岩（土）资源概况、研究简史；根据成分、结构、地质产状等特征，提出了中国煤系高岭岩（土）的成因类型；对生物和有机质在其形成中的作用进行了分析和探讨，并结合有机酸溶解矿物模拟实验对其成矿作用做了初步探索；最后对煤系高岭岩的某些关键性加工技术进行了简述。     

自然铜、铜合金矿物及其矿床形成机理新探索

描述了自然铜、铜合金矿物及其矿床形成的新机制。在岩浆及热液中，铜及铜合金可呈氢化物、羧基配合物及纳米粒子活性、迁移、富集形成自然铜矿床，或经以后的地质事件，长期、多次迁移富集，叠加形成富而大的自然铜矿床。在表生条件下，铜的硫化矿物被氧化分解，可形成亚铜的硫代硫酸盐及氯配合物，部分可形成铜的硫酸盐配合物迁移，由于硫代硫酸盐被氧化，亚铜岐化可形成高纯度的自然铜，但它易氧化形成孔雀石、蓝铜矿、赤铜矿、黑铜矿、硅孔雀石等，因此很难形成自然铜矿床。     

Analysis of Post-Failure Slope Movements within the Framework of Hazard and Risk Analysis

The paper first recalls briefly a methodological framework to assess landslide hazard and risk analysis in terms of predisposition, triggering andrevealing factors. This framework, that reflects the mechanisms involved in the landslide, is based on the Geotechnical Characterisation of slope movements proposed by Vaunat et al. (1994) and Leroueil et al. (1996). The Geotechnical Characterisation can be schematized by a 3-D matrix having the following axes: types of movement; types ofmaterial; and the four stages of movement: pre-failure, failure, post-failure andreactivation. For each relevant element of this 3-D matrix, there is a characterisationsheet including: the controlling laws and parameters, the predisposition factors, thetriggering or aggravating factors, the revealing factors and the consequences of the movement. The paper focuses afterwards on the post-failure stage, which generallyis the most destructive, and on the mobility index. It is shown that this laterindex can be described as the product of sub-indices associated with failure, brittlenessof the material, ability of the soil to develop pore pressures, geometry of the moving soil mass and characteristics of the terrain. It is also shown how these aspectscan be incorporated into the Geotechnical characterisation of slope movements. This seems to provide a rational basis for examining slope movements at the post-failure stage and assessing associated risks.