Tracer properties of eroded sediment and source material

This paper examines the conservativeness of tracers through the sediment generation process. This is done by comparing a selection of tracer properties of sediment eroded from large plots by simulated rainfall, with the corresponding properties of the source materials within the plots. Sediment was generated using three simulated rainfall events for each of five selected erosion source types in the Tarago catchment, Victoria, Australia. As there were particle size and organic content differences between the source material and the generated sediment, the measured tracer properties of the source material were corrected for these differences. The possible role of analytical errors in this investigation was also addressed. The geochemical property, concentration of Fe₂O₃, was not conservative for any of the process sources investigated. Concentration of Al₂O₃ was not conservative for three of the four process sources investigated, and the sum of molecular proportions of CaO**, Na₂O, K₂O and Al₂O₃ was not conservative for two of the four process sources investigated. Mineral magnetic properties, IRM₈₅₀ and χ were also found to be not conservative, although this may be the result of the complex relationship between particle size and mineral magnetic properties not being adequately accommodated in this analysis. The radionuclide tracers, ¹³⁷Cs and ²¹⁰Pb_ex, were found to be conservative through the sediment generation process. Copyright © 2002 John Wiley & Sons, Ltd.     

Erosion prediction on unpaved mountain roads in northern Thailand: validation of dynamic erodibility modelling using KINEROS2

The event‐ and physics‐based KINEROS2 runoff/erosion model for predicting overland flow generation and sediment production was applied to unpaved mountain roads. Field rainfall simulations conducted in northern Thailand provided independent data for model calibration and validation. Validation shows that KINEROS2 can be parameterized to simulate total discharge, sediment transport and sediment concentration on small‐scale road plots, for a range of slopes, during simulated rainfall events. The KINEROS2 model, however, did not accurately predict time‐dependent changes in sediment output and concentration. In particular, early flush peaks and the temporal decay in sediment output were not predicted, owing to the inability of KINEROS2 to model removal of a surface sediment layer of finite depth. After 15–20 min, sediment transport declines as the supply of loose superficial material becomes depleted. Modelled erosion response was improved by allowing road erodibility to vary during an event. Changing the model values of erosion detachment parameters in response to changes in surface sediment availability improved model accuracy of predicted sediment transport by 30–40%. A predictive relationship between road erodibility ‘states’ and road surface sediment depth is presented. This relationship allows implementation of the dynamic erodibility (DE) method to events where pre‐storm sediment depth can be estimated (e.g., from traffic usage variables). Copyright © 2001 John Wiley & Sons, Ltd.     

Multiple modes of storm runoff generation in a North Carolina coastal plain watershed

The results of field measurements conducted in a small (19·37 ha) agricultural watershed on the North Carolina coastal plain during the summer of 1996 are presented. The objective of the study was to develop a more complete understanding of basin response in the region with respect to stormflow generation and, in particular, to identify the processes that determine storm runoff and the conditions under which such processes occur. Twenty‐four storm events were monitored, including two tropical storm systems and two hurricanes. The data demonstrate considerable spatial and temporal heterogeneity in runoff generation within the watershed. Surface flowpaths, in the form of Hortonian overland flow and saturation overland flow, were found to be the dominant runoff processes during the storm events measured. The hillslope flowpaths had the same response time as the basin streamflow, but significantly shorter time of rise and lag times. The importance of Hortonian flow in a basin with sandy, permeable soils, as well as the rapid stormflow response in a low‐relief area with a humid climate, was contrary to expectations. This, coupled with the contingency of runoff response, suggests that it may be difficult to generalize about runoff generation mechanisms in broad terms, and that a synoptic approach may be more appropriate. Copyright © 2006 John Wiley & Sons, Ltd.     

Some early Russian studies of subsurface storm‐flow processes

Subsurface flow is an important component of the catchment hydrological cycle. Various mechanisms of this process and their role in storm‐flow generation attracted the attention of many researchers throughout the twentieth century. The results of most of these studies are well documented. However, similar studies conducted in the past by many Russian hydrologists have never been made available to the English speaking hydrological community. This paper attempts to fill this gap and briefly review some of these investigations, focusing on their main results. It starts with the review of the early experimental studies (after 1930s–1950s), which allow the main characteristics of subsurface storm flow to be established. This is followed by a review of the research conducted in 1960s, which resulted in some conceptualization of the subsurface flow mechanisms. The paper also draws some parallels between this, mostly unknown, subsurface flow research in Russia and the better‐known contemporary studies of this process. Copyright © 2002 John Wiley & Sons, Ltd.     

On the relationship between hydrographs and chemographs

The spatial representativeness of gauging stations was investigated in two low‐mountainous river basins near the city of Trier, southwest Germany. Longitudinal profiles during low and high flow conditions were sampled in order to identify sources of solutes and to characterize the alteration of flood wave properties during its travel downstream. Numerous hydrographs and chemographs of natural flood events were analysed in detail. Additionally, artificial flood events were investigated to study in‐channel transport processes. During dry weather conditions the gauging station was only representative for a short river segment upstream, owing to discharge and solute concentrations of sources contiguous to the measurement site. During artificial flood events the kinematic wave velocity was considerably faster than the movement of water body and solutes, refuting the idea of a simple mixing process of individual runoff components. Depending on hydrological boundary conditions, the wave at a specific gauge could be entirely composed of old in‐channel water, which notably reduces the spatial representativeness of a sampling site. Natural flood events were characterized by a superimposition of local overland flow, riparian water and the kinematic wave process comprising the downstream conveyance of solutes. Summer floods in particular were marked by a chronological occurrence of distinct individual runoff components originating only from a few contributing areas adjacent to the stream and gauge. Thus, the representativeness of a gauge for processes in the whole basin depends on the distance of the nearest significant source to the station. The consequence of our study is that the assumptions of mixing models are not satisfied in river basins larger than 3 km². Copyright © 2006 John Wiley & Sons, Ltd.     

Hydrocarbon Generation Characteristics of Source Rocks from Different Saline Environments in the Dongpu Depression,Bohai Bay Basin,China

The Dongpu Depression is a secondary salt-bearing tectonic unit in the Bohai Bay Basin, eastern China. The depositional environment of this depression regarding its Paleogene strata is clearly different in plane, including the saltwater environment(SE) in the north, the freshwater environment(FE) in the south and the brackish water environment(BE) in the middle. The result of oil and gas exploration in the Dongpu Depression shows that more than 90% of the proven oil reserves are distributed in the northern saltwater environment. Previous studies indicate that the organic geochemistry characteristics and the hydrocarbon generation capacity of the source rocks are very clearly diverse under different environments, which results in the significant differences in the proved reserves between the north and the south. In order to further explore the differences in the hydrocarbon generation capacity of the source rocks under distinct depositional environments and the mechanism of their occurrence, three samples from different depositional environments(W18-5 for SE, H7-18 for BE, CH9 for FE) were used for confined gold tube pyrolysis experiments. The results show that the CH4 yields of W18-5, H7-18 and CH9 increase with increasing temperature, the maximum yields being 405.62 mg/g TOC, 388.56 mg/g TOC and 367.89 mg/g TOC, respectively. The liquid hydrocarbon yields of W18-5, H7-18 and CH9 firstly increase with increasing temperature and then decrease after the critical temperatures. The maximum yields of C6-14 are 149.54 mg/g TOC, 140.18 mg/g TOC and 116.94 mg/g TOC, the maximum yields of C14+ being 852.4 mg/g TOC, 652.6 mg/g TOC and 596.41 mg/g TOC, respectively for W18-5, H7-18 and CH9. To summarize, the order of hydrocarbon potential from high to low is W18-5, H7-18 and CH9. On this basis, through analyzing the influencing factors of hydrocarbon differences, this paper reveals that the saltwater environment is characterized by 4 factors: higher salinity, halophilic algae, high paleo-productivity and a strongly reducing environment, which are beneficial to the enrichment of organic matter and lead to the formation of high levels of sapropelite and exinite. According to the variation of oil and gas components in the pyrolysis experiments, the hydrocarbon generation process is divided into three stages: kerogen cracking, oil cracking and C2-5 cracking. Combined with hydrocarbon generation characteristics and stages, the evolutionary model of hydrocarbon generation for source rocks under different environments is established.     

Controls on structural styles along the deformation front of the Subandean zone of southern Bolivia

The Subandean zone of southern Bolivia is a typical thin-skinned fold and thrust belt with remarkable regularity in the geometry of the structures. However, when the structural geometry and evolution are analyzed in detail, it is verified that there are many deviations from such regularity. In this paper, special emphasis has been placed on analyzing those processes that could explain the along strike variations in structural styles of the deformation front.Particularly, the role that played the upper detachment level in the development of the different structural styles observed along the deformation front is analyzed herein. This analysis is focused on the development of overpressures, which may have been essential for the activation of the detachment level in the Devonian shales of the Los Monos Formation. To do this, we made a series of 1D petroleum system models at different locations along the deformation front. This analysis allowed to model primary gas generation and secondary cracking — processes that are related to overpressure occurrence, and therefore, to the efficiency of the upper detachment level. The models suggest a close relationship between thermal evolution of the foreland basin and generation of gas, with different structural styles observed at the deformation front. Thus, it was possible to divide the deformation front of the southern Subandean zone into two distinct segments. In the northern segment, where models suggest that gas generation and overpressures of the Los Monos Formation would be well developed, the existence of composite roof duplexes is verified. On the other hand, where the models suggest that generation of gas in the Los Monos Formation would be limited, the upper detachment level is not involved in the deformation, and the existence of fault bend fold structures is verified.     

Channel network extent in the context of historical land use,flow generation processes,and landscape evolution in the North Carolina Piedmont

Intensive agricultural land use in the 18th to early 20th centuries on the southeastern Piedmont resulted in substantial soil erosion and gully development. Today, many historically farmed areas have been abandoned and afforested, and such landscapes are an opportunity to study channel network recovery from disturbance by gullying. Channel initiation mapping, watershed area–slope relationships, and field monitoring of flow generation processes are used to identify channel network extent and place it in hydrologic, historical and landscape evolution context. In six study areas in the North Carolina Piedmont, 100 channel heads were mapped in fully‐forested watersheds, revealing a channel initiation relationship of 380 = AS^1.27, where A is contributing area (m²) and S is local slope (m/m). Flow in these channels is generated by subsurface and overland flow. The measured relative slope exponent is lower than expected based on literature values of ~2 for forested watersheds with subsurface and overland flow, suggesting that the channel network extent may reflect a former hydrological regime. However, geomorphic evidence of recovery in channel heads within fully forested watersheds is greater than those with present day pasture. Present day channel heads lie within hollows or downslope of unchanneled valleys, which may be remnants of historical gullies, and area–slope relationships provide evidence of colluvial aggradation within the valleys. Channel network extent appears to be sensitive to land use change, with recovery beginning within decades of afforestation. Channel initiation mapping and area–slope relationships are shown to be useful tools for interpreting geomorphic effects of land use change. Copyright © 2012 John Wiley & Sons, Ltd.     

Modelling streamflow trends for a watershed with limited data: case of the Litani basin,Lebanon

Abstract

Streamflow variability in the Upper and Lower Litani basin, Lebanon was modelled as there is a lack of long-term measured runoff data. To simulate runoff and streamflow, daily rainfall was derived using a stochastic rainfall generation model and monthly rainfall data. Two distinct synthetic rainfall models were developed based on a two-part probabilistic distribution approach. The rainfall occurrence was described by a Markov chain process, while the rainfall distribution on wet days was represented by two different distributions (i.e. gamma and mixed exponential distributions). Both distributions yielded similar results. The rainfall data were then processed using water balance and routing models to generate daily and monthly streamflow. Compared with measured data, the model results were generally reasonable (mean errors ranging from 0.1 to 0.8?m³/s at select locations). Finally, the simulated monthly streamflow data were used to investigate discharge trends in the Litani basin during the 20th century using the Mann-Kendall and Sen slope nonparametric trend detection methods. A significant drying trend of the basin was detected, reaching a streamflow reduction of 0.8 and 0.7 m³/s per decade in January for the Upper and Lower basin, respectively.

Editor D. Koutsoyiannis; Associate editor Sheng Yue

Citation Ramadan, H.H., Beighley, R.E., and Ramamurthy, A.S., 2012. Modelling streamflow trends for a watershed with limited data: case of the Litani basin, Lebanon. Hydrological Sciences Journal, 57 (8), 1516–1529.     

Functional evaluation of a simplified scaling method for assessing the spatial variability of soil hydraulic properties at the hillslope scale

Abstract

Mapping soil hydraulic parameters with traditional scaling methods that use laboratory-determined hydraulic characteristics (the LAB method) is not always feasible as it involves expensive, time-consuming and sophisticated measurements on soil samples collected in several locations of the study area. An alternative scaling method (the AP method) has been recently proposed to indirectly retrieve the soil hydraulic properties following the Arya-Paris physico-empirical pedotransfer function, which makes use of particle-size distribution and bulk density values. In this synthetic study we verify the performance of the AP method from a functional perspective, by evaluating the differences in the simulated soil water budget through a Monte Carlo approach. Notwithstanding that the AP method can provide soil hydraulic property patterns with faster experimental procedures and minor costs, we observe significant bias in the predicted spatially-averaged soil water budget due to a poor parametric calibration of the AP method and an imprecise identification of the spatial correlation structure of the AP-estimated scaling factors.

Citation Nasta, P., Romano, N., and Chirico, G.B., 2013. Functional evaluation of a simplified scaling method for assessing the spatial variability of soil hydraulic properties at the hillslope scale. Hydrological Sciences Journal, 58 (5), 1059–1071.