Isotope hydrological study of mean transit time in the granitic Strengbach catchment (Vosges massif,France): application of the FlowPC model with modified input function

Measurements of ¹⁸O concentrations in precipitation, soil solution, spring and runoff are used to determine water transit time in the small granitic Strengbach catchment (0·8 km²; 883–1146 m above sea level) located in the Vosges Mountains of northeastern France. Water transit times were calculated by applying the exponential, exponential piston and dispersion models of the FlowPC program to isotopic input (rainfall) and output (spring and stream water) data sets during the period 1989–95. The input function of the model was modified compared with the former version of the model and estimated by a deterministic approach based on a simplified hydrological balance. The fit between observed and calculated output data showed marked improvements compared with results obtained using the initial version of the model. An exponential piston version of the model applied to spring water indicates a 38·5 month mean transit time, which suggests that the volume in the aquifer, expressed in water depth, is 2·4 m. A considerable thickness (>45 m) of fractured bedrock may be involved for such a volume of water to be stored in the aquifer. Copyright © 2005 John Wiley & Sons, Ltd.     

An atlas of the optical spectrum of supernova 1987A in the large magellanic cloud

Photographic spectra of SN1987A in the LMC have been obtained from 1987 February 25 to 1988 June 30. Microdensitometer tracings of these have been reduced to intensity and corrections for instrumental response have been applied to the spectra. This paper presents these data in an atlas format, discusses the reduction procedures in detail, and presents radial velocity measurements of selected lines in the spectra     

利用自回归模型检测地球极移重力效应

同时采用4个台站的国际超导重力仪长期连续重力观测资料和国际地球自转服务中心提供的同步地球自转参数，研究了极移引起的地球重力场变化特征。利用自回归模型估计了各序列的功率谱密度和积谱密度，结果表明极移导致的重力效应的主要能量集中在Chandler摆动和周年项附近，叠积后实际重力观测与极移重力信号理论值之间的差异分别为0．4％和3．9％，说明超导重力仪可有效监测极移导致的重力变化。     

空间数据仓库的认知过程

从理论上探讨了空间数据仓库的认知过程．主要是十一个层次的世界模型通过十个算子转换的过程，对十一个层次世界及十个算子概念进行了较详细地讨论，并用代数系统对其进行了定义。     

多条太阳光球FeI线在磁场中形成及形成深度的综合分析(Ⅰ)

针对多通道滤光器太阳磁场望远镜的磁场观测定标及掌握(所采用的)谱线特征之需要,取VAL宁静太阳大气模型计算了7条Fel光球线的Stokes轮廓、形成深度、贡献函数分布,从而较为系统地对多条反常及正常Zeeman线的特征及性质作出了分析与总结,解释了在磁光效应影响下Stokes Q,U参量的形成深度曲线在近线心区域处出现陡峭峰值的原因。     

A critical state model for sands dependent on stress and density

An elastoplastic model for sands is presented in this paper, which can describe stress–strain behaviour dependent on mean effective stress level and void ratio. The main features of the proposed model are: (a) a new state parameter, which is dependent on the initial void ratio and initial mean stress, is proposed and applied to the yield function in order to predict the plastic deformation for very loose sands; and (b) another new state parameter, which is used to determine the peak strength and describe the critical state behaviour of sands during shearing, is proposed in order to predict simply negative/positive dilatancy and the hardening/softening behaviour of medium or dense sands. In addition, the proposed model can also predict the stress–strain behaviour of sands under three-dimensional stress conditions by using a transformed stress tensor instead of ordinary stress tensor. Copyright © 2004 John Wiley & Sons, Ltd.     

Plane of elastic non-resisting tension material under foundation structures

In the frame of 2D-static problems one approaches the problem of elastic-NRT (not-resisting tension) semi-plane loaded on its limit line. This problem is intended to model the stress situation induced in the soil by a foundation structure. The solution, in terms of activated stress field, is searched for in the class of stress fields satisfying equilibrium and admissibility conditions, by applying an energy approach. Copyright © 2004 John Wiley & Sons, Ltd.     

Modelling Gas And Dust Release From Comet Hale–Bopp

Numerical simulations of the evolving activity of comet Hale-Bopp are presented, assuming a porous, spherical nucleus, 20 km in radius, made of dust and gas-laden amorphous ice. The main effects included are: crystallization of amorphous ice and release of occluded gas, condensation, sublimation and flow of gases through the pores, changing pore sizes, and flow of dust grains. The model parameters, such as initial pore size and porosity, emissivity, dust grain size, are varied in order to match the observed activity. In all cases, a sharp rise in the activity of the nucleus occurs at a large heliocentric distance pre-perihelion, marked by a few orders of magnitude increase in the CO and the CO₂ fluxes and in the rate of dust emission. This is due to the onset of crystallization, advancing down to a few meters below the surface, accompanied by release of the trapped gases. A period of sustained, but variable, activity ensues. The emission of water molecules is found to surpass that of CO at a heliocentric distance of 3 AU. Thereafter the activity is largely determined by the behaviour of the dust. If a dust mantle is allowed to build up, the water production rate does not increase dramatically towards perihelion; if most of the dust is ejected, the surface activity increases rapidly, producing a very bright comet. This revised version was published online in July 2006 with corrections to the Cover Date.     

描述地壳垂直运动过程的一种函数形式

本文在已有数据处理方法的基础上，利用近代数值逼近理论，给出了从时空域角度描述地壳垂直运动过程的一种具体的函数解析形式。最后给出了一个实际算例。     

Finite element formulation and algorithms for unsaturated soils. Part II: Verification and application

The finite‐element formulation and integration algorithms developed in Part I are used to analyse a number of practical problems involving unsaturated and saturated soils. The formulation and algorithms perform well for all the cases analysed, with the robustness of the latter being largely insensitive to user‐defined parameters such as the number of coarse time steps and error control tolerances. The efficiency of the algorithms, as measured by the CPU time consumed, does not depend on the number of coarse time steps, but may be influenced by the error control tolerances. Based on the analyses presented here, typical values for the error control tolerances are suggested. It is also shown that the constitutive modelling framework presented in Part I can, by adjusting one constitutive equation and one or two material parameters, be used to simulate soils that expand or collapse upon wetting. Treating the suction as a strain variable instead of a stress variable proves to be an efficient and robust way of solving suction‐dependent plastic yielding. Moreover, the concept of the constitutive stress is a particularly convenient way of handling the transition between saturation and unsaturation. Copyright © 2003 John Wiley & Sons, Ltd.