盆地基底岩性的综合地球物理预测方法——以松辽盆地滨北地区基底岩性预测为例

预测盆地基岩岩性不仅对于研究盆地的深部地质结构及盆地的形成演化具有重要的意义,而且也对基岩风化壳油气藏的勘探具有一定的指导作用.本文通过对盆地重、磁异常成因的综合分析,提出了一系列盆地基底岩性综合预测研究的综合地球物理资料处理解释方法技术.指出在地震构造界面的约束下采用重力剥皮技术可以较为可靠地获取基底岩性重力异常并分析了界面密度差对剥皮后基底岩性重力异常的影响,给出了等效密度差的求取方法.分析了基底起伏对基岩岩性磁异常的影响,指出采用"平化曲"将磁异常归化到与基底同一高度,可以有效地提高对基底岩性体的刻画能力.通过综合分析认为:应用基底的相对视密度、相对视磁化率及两者的相关系数可以有效地刻画基底岩性的特征.神经网络是基底岩性判别与分类的有效方法技术.通过对松辽盆地北部滨北地区的基底岩性的综合预测显示了本文系列预测基底岩性方法的有效性,预测结果反映了松辽盆地基底岩性的分布特征.该系列方法技术可为其他盆地的基底地质填图提供了可借鉴的综合预测方法技术.     

High-velocity frictional behavior of Longmenshan fault gouge from Hongkou outcrop and its implications for dynamic weakening of fault during the 2008 Wenchuan earthquake

High-velocity friction experiments were conducted on clayey fault gouge collected from Hongkou outcrop of Beichuan fault,located at the southwestern part of Longmenshan fault system that caused the disastrous 2008 Wenchuan earthquake.The ultimate purpose of this study is to reproduce this earthquake by modeling based on measured frictional properties.Dry gouge of about 1 mm in thickness was deformed dry at slip rates of 0.01 to 1.3 m/s and at normal stresses of 0.61 to 3.04 MPa,using a rotary-shear high-...     

Theory and experimental study for sliding isolators with variable curvature

Because a conventional isolation system with constant isolation frequency is usually a long‐period dynamic system, its seismic response is likely to be amplified in earthquakes with strong long‐period wave components, such as near‐fault ground motions. Seismic isolators with variable mechanical properties may provide a promising solution to alleviate this problem. To this end, in this work sliding isolators with variable curvature (SIVC) were studied experimentally. An SIVC isolator is similar to a friction pendulum system (FPS) isolator, except that its sliding surface has variable curvature rather being spherical. As a result, the SIVC's isolation stiffness that is proportional to the curvature becomes a function of the isolator displacement. By appropriately designing the geometry of the sliding surface, the SIVC is able to possess favorable hysteretic behavior. In order to prove the applicability of the SIVC concept, several prototype SIVC isolators, whose sliding surfaces are defined by a sixth‐order polynomial function, were fabricated and tested in this study. A cyclic element test on the prototype SIVC isolators and a shaking table test on an SIVC isolated steel frame were all conducted. The results of both tests have verified that the prototype SIVC isolators do indeed have the hysteretic property of variable stiffness as prescribed by the derived formulas in this study. Moreover, it is also demonstrated that the proposed SIVC is able to effectively reduce the isolator drift in a near‐fault earthquake with strong long‐period components, as compared with that of an FPS system with the same friction coefficient. Copyright © 2011 John Wiley & Sons, Ltd.     

Application of snowmelt runoff model for water resource management

Snow‐covered areas (SCAs) are the fundamental source of water for the hydrological cycle for some region. Accurate measurements of river discharge from snowmelt can help manage much needed water required for hydropower generation and irrigation purposes. This study aims to apply the snowmelt runoff model (SRM) in the Upper Indus basin by the Astore River in northern Pakistan for the years 2000 to 2006. The Shuttle Radar Topographic Mission (SRTM) data are used to generate the Digital Elevation Model (DEM) of the region. Various variables (snow cover depletion curves (SCDCs), temperature and precipitation) and parameters (degree‐day factor, recession coefficient, runoff coefficients, time lag, critical temperature and temperature lapse rate) are used as input in the SRM. However, snow cover data are direct and an important input to the SRM. Satellite data from the Moderate Resolution Imaging Spectroradiometer (MODIS) are used to estimate the SCA. Normalized difference snow index (NDSI) algorithm is applied for snow cover mapping and to differentiate snow from other land features. Nash–Sutcliffe coefficient of determination (R²) and volume difference (D_V) are used for quality assessment of the SRM. The results of the current research show that for the study years (2000–2006), the average value of R² is 0·87 and average volume difference D_V is 1·18%. The correlation coefficient between measured and computed runoff is 0·95. The results of the study further show that a high level of accuracy can be achieved during the snowmelt season. The simulation results endorse that the SRM in conjunction with MODIS snow cover product is very useful for water resource management in the Astore River and can be used for runoff forecasts in the Indus River basin in northern Pakistan. Copyright © 2011 John Wiley & Sons, Ltd.     

Crop evapotranspiration in the Nile Delta under different irrigation methods

Eddy correlation measurements within the Nile Delta allowed the determination of evapotranspiration (E) for seven crops (rice, maize, cotton, sugar beet, berseem, wheat and fava beans) using basin irrigation (BI), furrow irrigation (FI), BI with increased intervals (BI_i), FI with increased intervals (FI_i), strip irrigation (SI) and drip irrigation (DI). Total E values over the cropping season for rice (BI, BI_i) were the highest (>600 mm), while those for sugar beet (DI), maize (SI and DI) and berseem (BI_i) were the lowest (<250 mm). The differences were due to a combination of atmospheric demand, soil moisture, the presence of surface standing water, root depth, and the length and timing of the cropping season. The DI and SI methods had the advantage for water saving, while the FI_i and BI_i methods were effective for crops with shallow root lengths. Estimated annual E was 566–828 mm/year (water-saving irrigation) and 875–1225 mm/year (conventional irrigation).     

three-dimensional sensitivity coefficients of apparent resistivity and preliminary application

We calculate three-dimensional sensitivity coefficients distribution of apparent resistivity observation when Schlumberger array is used by using finite element method. Analysis results suggest that for the situation of one-dimensional positive or minus coefficient of surface medium, three-dimensional sensitivity coefficients distribution at surface shows similar patterns, and sensitivity coefficients distributions of different layered electric structures are also similar. There are two approximate ellipses at the two-dimensional surface plane between current electrodes and potential electrodes, where sensitivity coefficients are minus, and sensitivity coefficients at other areas are positive. Sensitivity coefficients at two approximate ellipses between current electrodes and potential electrodes are minus at the vertical section along monitoring line, while others are positive. From the three-dimensional view, minus sensitivity coefficients are at the two approximate half ellipsoids between current electrodes and potential electrodes when arrays are applied at surface. And coefficients near the electrodes are much greater than other areas. When resistivity of local areas at surface changes, we can qualitatively analyze the disturbing effects caused by the areas using three dimensional sensitivity coefficients distribution, and the analysis result can serve as reference for further experiment and numerical model quantitative analysis.     

River bank erosion control by soil nailing

A study has been done for analysing soil nailed cuts with circular type wedge failure by friction circle method. Various parameters such as nail length, nail diameter, nail inclination, wall inclination and angle of internal friction of soil have been considered to determine the factor of safety of nailed open cuts. The study shows that for cohesionless soil nailed cut, factor of safety increase with increase of parameters like angle of internal friction of soil, length of nail (L) versus height of cut (H) ratio, cohesion of soil and nail inclination (upto 15°) with horizontal. The study revealed that nails grouted with cement perform better than driven nails. A case study further confirms the analytical findings. Received 7 October     

Spectral Simulation and Conditioning to Local Continuity Trends in Geologic Modeling

Spectral simulation has gained application in building geologic models due to the advantage of better honoring the spatial continuity of petrophysical properties, such as reservoir porosity and shale volume. Distinct from sequential simulation methods, spectral simulation is a global algorithm in the sense that a global density spectrum is calculated once and the inverse Fourier transform is performed on the Fourier coefficient also only once to generate a simulation realization. The generated realizations honor the spatial continuity structure globally over the whole field instead of only within a search neighborhood, as with sequential simulation algorithms. However, the disadvantage of global spectral simulation is that it traditionally cannot account for the local information such as the local continuity trends, which are often observed in reservoirs and hence are important to be accounted for in geologic models. This disadvantage has limited wider application of spectral simulation in building geologic models. In this paper, we present ways of conditioning geologic models to the relevant local information. To account for the local continuity trends, we first scale different frequency components of the original model with local-amplitude spectrum ratios that are specific to the local trend. The sum of these scaled frequency components renders a new model that displays the desired local continuity trend. The implementation details of this new method are discussed and examples are provided to illustrate the algorithm.     

微型抗滑桩单桩设计计算模型及算法研究

考虑微型桩与周围岩土体间摩擦力的作用,提出了一种新的微型抗滑桩单桩设计计算模型,并给出了具体算法。由微型桩加固滑坡体的变形特点,分析微型桩与岩土体之间的相互作用机制,将微型桩与周围岩土体的摩擦作用引入其受力分析中;根据微型桩上各部分受力特点的不同,将微型桩分成上部摩擦受拉段、中部滑坡推力作用段和下部锚固段3段进行分析,推导了微型桩总的变形控制方程及各分段的变形控制方程;采用初参数法对控制方程进行求解,得到了微型抗滑桩上的内力分布及变形规律。计算结果表明,在滑坡推力作用下,微型桩的变形主要发生在滑面附近及以上桩段,滑面附近桩段将产生较大的内力和弯曲变形,受拉段弯曲变形较小,近似水平移动;桩与岩土体间的摩擦力是微型桩与周围岩土体相互作用的重要组成部分,摩擦力的作用能显著减小微型桩的弯曲变形,有效控制滑坡体的位移。     

核安全相关边坡与一般边坡挡土墙抗震稳定性验算对比分析

在挡土墙稳定性计算基本原理基础上, 引入《核电厂抗震设计规范》(GB 50267-97) 关于地震系数的规定, 重新建立了安全相关边坡挡土墙土压力和地震角计算公式, 并应用到实际工程中。对比分析显示, 挡土墙按核安全边坡和一般边坡进行抗震验算时, 地震系数、地震角的取值相差较大; 由于按核安全边坡计算时地震力远大于一般边坡, 因此稳定系数远小于一般边坡。