竖向与水平向地震动加速度峰值比统计特征分析

以强地面运动加速度记录为基础,研究了竖向与水平向加速度峰值比值(V/H)的统计分布特征。结果表明,V/H服从对数正态分布。对记录按震级、震中距、场地条件和震源机制进行分类统计,研究了这些因素对V/H的影响。统计分析结果显示,V/H与震级的关系不明显;V/H随距离的增大而减小,在软土场地上尤为明显;V/H与场地条件有很大关系,在近场(R≤60km)土层场地要高于基岩场地,而在远场则相反;震源机制对V/H有较大影响,特别是在近场。     

Characteristics of Seismic Activity in a 3-Dimensional Space before the Wen'an Earthquake,Hebei Province by Relocation of Small Earthquakes in the China's Capital Area

Characteristics of seismic activity before the M5.1 earthquake in Wen'an,Hebei Province on July 4,2006 are analyzed by relocation of small earthquakes in the China's capital area,and some results are obtained as follows:① The seismic activity of M L ≥3.0 in the middle part of the Hebei plain seismic belt displayed a feature of strengthening (lasting 43 months) quiescence (17 months) five years before the Wen'an earthquake.Simultaneously,the strain release curve showed a variation process of accelerating-flatting.② A seismogenic gap in a three-dimensional space,located at the depth of 15km ～ 20km,with 70km long in latitude direction and 90km long in longitude orientation,was formed by M≥2.0 earthquakes four years prior to the Wen'an earthquake.The initial rupture point of the Wen'an earthquake is situated at the bottom of the gap.③ The focal depths of earthquakes with M L ≥2.0 in the middle part of the Hebei plain seismic belt gradually increased from 10km to 30km during the period from April,2003 to October,2004.Meanwhile,the seismic activity obviously strengthened in the middle and lower crust (from 20km to 30km in depth).     

2010年青海玉树地震及震后青藏高原强震趋势分析

2010年4月14日青海玉树发生7.1级地震,这是该区历史上发生的最为强烈的地震。该地震属走滑型,地处青藏高原巴颜喀拉地块南边界,发震断裂为甘孜—玉树—风火山左旋走滑断裂,地震破裂主要向震中东南方向。该地震是巴颜喀拉地块与羌塘地块以不同速率向东运动,地块间的差异运动使其边界应力积累到一定程度引发破裂的结果。根据地震定标律估算的主震断层破裂参数和应力参数为:地震矩M0=1.78×1019N.m,矩震级MW=6.8,断层破裂面积S=468km2,断层错距D=1.4m,断层破裂长度L=37km,断层破裂宽度W=12.6km,剪应力τ0=16.8MPa,应力降Δσ=7.03MPa。历史地震分析表明,玉树7.1级地震是在世界8级以上地震、中国西部大三角7.8级以上地震、南北地震带7级以上地震和巴颜喀拉块体7级以上地震处于强烈活动背景下发生的。玉树地震后,青藏高原巴颜喀拉地块、羌塘地块及川滇菱形块体未来发生7级以上地震的危险性较大。     

Residual curvature migration velocity analysis for angle domain common imaging gathers

Pre-stack depth migration velocity analysis is one of the keys to influencing the imaging quality of pre-stack migration. In this paper we cover a residual curvature velocity analysis method on angle-domain common image gathers (ADCIGs) which can depict the relationship between incident angle and migration depth at imaging points and update the migration velocity. Differing from offset-domain common image gathers (ODCIGs), ADCIGs are not disturbed by the multi-path problem which contributes to imaging artifacts, thus influencing the velocity analysis. On the basis of horizontal layers, we derive the residual depth equation and also propose a velocity analysis workflow for velocity scanning. The tests to synthetic and field data prove the velocity analysis methods adopted in this paper are robust and valid.     

反压土对悬臂式支护结构嵌固深度的影响研究

基于Rankine土压力理论、滑移线场理论和Boussinesq解答在均布条形荷载作用下的表达式,建立了考虑反压土自重对坑底土体水平抗力的增强作用和反压土本身的嵌固作用两种机制时悬臂式支护结构嵌固深度的计算方法,并进行了算例分析。研究表明：虽然反压土能提供给支护结构的水平抗力较小,但由于其合力力臂较大,因此对支护结构有明显的嵌固作用;另外,反压土的自重能明显提高坑底土体的水平抗力。综合考虑反压土的以上效应后,支护结构的嵌固深度可以明显减小。基坑内侧预留反压土的施工方法可以省去水平支撑、降低支护结构深度,还可以节约投资和缩短工期,具有良好的经济效益、社会效益和环境效益。因此,在条件许可的情况下,该施工方法应优先选用     

既有基坑延深开挖稳定性评价与支护方案确定

以北京市某特殊基坑工程为背景,采用FLAC3D软件,选用Mohr-Coulomb准则,对基坑在现有支护方案条件下进行延深开挖,计算分析桩锚支护体系的变形、受力情况。结果表明,基坑在现有支护方案条件下进行延深开挖将导致护坡桩抗弯性能不足、支护结构水平位移过大、锚固体系失效等问题,要保证基坑延深开挖后的安全稳定,必须对护坡桩增设支点,增加支护力。根据设计变更要求及施工现场实际条件,对多种加固支护方案进行比选,最终选用对护坡桩增设锚索的方案进行延深基坑的预加固。采用数值方法模拟分析上述加固方案后的基坑延深开挖力学行为,预测基坑及支护结构的变形情况,并与现场监测数据进行对比分析。结果表明,基坑延深开挖预加固支护方案合理有效,表明该方法对于类似工程的设计优化及现场施工具有重要的参考意义。     

倾斜煤层底板破坏特征的微震监测

带压开采是承压水上采煤的主要方法,底板采动破坏深度的确定是实现带压开采的关键和前提。针对底板采动破坏深度现场测量方法的局限性,特别是倾斜煤层（煤层倾角在25°～45°之间）底板采动破坏深度的现场测量。以桃园煤矿1066工作面为例,利用高精度微震监测技术,对承压水上倾斜煤层底板的采动破坏特征进行了连续的、动态监测。监测结果表明：（1）工作面运输巷（下顺槽）附近的底板比工作面回风巷（上顺槽）附近的底板破坏深度更深,破坏范围更大;（2）倾斜煤层工作面底板破坏形态整体呈现为一个下大上小的非对称形态。根据微震监测结果,确定了1066工作面回风巷和运输巷附近底板的最大破坏深度,划分了倾斜煤层工作面底板突水危险区域。将微震监测的倾斜煤层底板破坏深度与经验公式计算的底板破坏深度进行了对比,指出了经验公式存在的不足     

Sources and depositional processes of tsunami deposits: Analysis using foraminiferal tests and hydrodynamic verification

Foraminiferal tests are commonly found in tsunami deposits and provide evidence of transport of sea floor sediments, sometimes from source areas more than 100 m deep and several kilometers away. These data contribute to estimates of the physical properties of tsunami waves, such as their amplitude and period. The tractive force of tsunami waves is inversely proportional to the water depth at sediment source areas, whereas the horizontal sediment transport distance by tsunami waves is proportional to the wave period and amplitude. We derived formulas for the amplitudes and periods of tsunami waves as functions of water depth at the sediment source area and sediment transport distance based on foraminiferal assemblages in tsunami deposits. We applied these formulas to derive wave amplitudes and periods from data on tsunami deposits in previous studies. For some examples, estimated wave parameters were reasonable matches for the actual tsunamis, although other cases had improbably large values. Such inconsistencies probably reflect: (i) local amplification of tsunami waves by submarine topography, such as submarine canyons; and (ii) errors in estimated water depth at the sediment source area and sediment transport distance, which mainly derive from insufficient identification of foraminiferal tests.     

MECHANISM OF THE 2015 PISHAN,XINJIANG, MS6.5 MAINSHOCK AND RELOCATION OF ITS AFTERSHOCK SEQUENCES

Using the digital broadband seismic data recorded by Xinjiang network stations, we obtained focal mechanism of the July 3 Pishan, Xinjiang, M_S6.5 earthquake with generalized Cut and Paste(gCAP)inversion method. The strike, dip and rake of first nodal plane are 97°, 27°, 51°, and the second nodal plane are 318°, 70°, 107°. The centroid depth and moment magnitude are calculated to be 12km and 6.4. Combining with the distribution of aftershocks, we conclude that the first nodal plane is the seismogenic fault, and the main shock presents a thrust earthquake at low angle. We relocated 1014 earthquakes using the double-difference algorithm, and finally obtained 937 relocated events. Our results show that the earthquake sequences clearly demonstrate a unilateral extension about 50km nearly in NWW direction, and are mainly located above 25km depth, especially the small earthquakes are predominately located at the shallow parts. Furthermore, the focal depth profile shows a southwestward dipping fault plane at the main shock position, suggesting listric thrust faulting, which is consistent with the dip of the mainshock rupture plane. The spatial distribution of aftershocks represents that the Tarim block was thrust under the West Kunlun orogenic belt. In addition, the dip angle of the fault plane gradually increases along the NWW direction, possibly suggesting a gradual increase of strike-slip component during the NWW rupturing process. From above, we conclude that the Pishan M_S6.5 earthquake is the result of Tibet plateau pushing onto the Tarim block from south to north, which further confirms that the continuous collision of India plate and Eurasia plate has strong influence on the seismic activity in and around the Tibet plateau.     

大容量气枪震源子波时频特性及其影响因素

通过分析福建街面水库气枪实验的近场水听器记录,研究气枪子波时频特性及其受沉放深度和工作压力的影响,并结合气泡模型解释气泡振荡过程。数据分析表明：①气枪子波由主脉冲和气泡脉冲组成。主脉冲振幅大,持时短,频带宽,通常应用于浅部探测;气泡脉冲能量集中在低频段,垂直穿透深,水平传播远,通常应用于深部探测。②随沉放深度的增加,主脉冲振幅变化很小,气泡脉冲振幅增加,初泡比减小,气泡周期减小,低频段主频增加。沉放深度为10m时,主脉冲振幅和初泡比最大,可应用于浅部探测;沉放深度为25m时,气泡脉冲振幅很大,初泡比最小,可应用于深部探测。③工作压力增加时,主脉冲振幅、气泡脉冲振幅、初泡比、气泡周期等随之增大,低频段主频则减小。