A new methodology for water resources multicriteria decision making under uncertainty

A multiciteria decision making problem in water resource is addressed through the generation of fuzzy Pareto optimal set. Methodology is using positive and negative ideal solutions (Lai, Y.-J., Liu, T.-Y., Hwang, C.L. (1994). TOPSIS for MODM. European Journal of Operational Research 76, 486-500) and a set of weights assigned to the objective functions in fuzzy triangular form. Solution of the problem is obtained by transforming each objective function into a set of three objective functions. A planning problem of multicriteria waste water treatment from the literature is used as an illustrative example to demonstrate the utility of the proposed methodology. The obtained fuzzy Pareto solution set has been compared with the deterministic solution set. It is shown that the proposed approach can: (a) capture the uncertainty associated with the assignment of weights; and (b) provide the decision makers with a wider range of solutions to select from.     

Stress pattern in two seismogenic sources in Nepal-Himalaya and its vicinity

The composite stereographic projection of orientations of the compression and tension axes using thirty-nine fault-plane solutions of earthquakes from two active seismogenic sources of Nepal and adjoining areas were examined and the nature of stress pattern and their influence on tectonics in the region have been studied. The seismogenic source located in Eastern Nepal region, which has been the site of 1934 Bihar-Nepal great earthquake of M 8.4, is presently experiencing N-S to NE-SW directed compressive stresses. The inferred pattern of compression axes in Western Nepal region suggests a shallow compressive stress, dipping N-S to NE-SW. Approximately similar nature of the stress regime is observed in Western and Eastern regions of Nepal, separated by nearly 700 km; it shows N-S to NNE-SSW direction of compression and underthrusting of the Indian Plate beneath the Himalaya at a shallow angle. Present study indicates that the stress is being released along the strikes of some of the transverse faults present in the region since the compressive stress exerted by the northward movement of the Indian Plate is approximately perpendicular to the Himalayan collision belt. Unilateral stress pattern generated by the northward movement of the Indian Plate in the central part of the Himalaya reveals that the present day collision occurs roughly perpendicular to the local strike of the Himalaya.     

含硼水溶液热力学性质研究进展

我国青海盐湖卤水以富含硼、锂而闻名于世。含硼水溶液热力学性质及相平衡的研究具有重要的理论和现实意义。从含硼水溶液热化学、热力学性质及模型等方面综述了已完成的硼酸盐水溶液的研究工作,并指出了含硼溶液热力学研究存在的问题和发展的方向。     

厦门市地震台网终止相应用探讨——以9.21集集地震震源破裂参数求解为例

介绍了终止相产生的机理,及其震源计算方法—解方程组法的原理,运用该方法对厦门市数字地震台网记录的9.21集集地震的波形进行终止相识别,首次利用短周期记录终止相方法得到了9.21集集地震的破裂长度、破裂走向、破裂速度等参数,研究结果与现场考察结果基本吻合。     

Seawater Intrusion in Semi-Closed Convergent Estuaries (Case Study of Moroccan Atlantic Estuaries): Application of Salinity Analytical Models

Salinity is an important parameter influencing the water quality of estuaries, and can constitute a serious problem to society due to the need for freshwater for industry and agriculture. Therefore, the determination of salt intrusion length in estuaries is a challenge for managers as well as scientists in this field. The managers tend to use simple and reliable tools for salinity variation. Although 2-D and 3-D numerical models are common tools for the prediction of salinity intrusion now, analytical models of salinity variation are much more efficient, and also require minimal sets of river data. In this paper, two analytical solutions, Brockway and Savenije used worldwide to assess longitudinal salinity variation in alluvial estuaries, are applied to the Moroccan Atlantic semi-closed estuaries, i.e., Sebou and Loukkos. The solutions are derived from salt convection-dispersion equations, with different assumptions for the dispersion coefficient. The estuaries' bathymetry is described by an exponential function. The performance of these two solutions was evaluated by comparing their results with field-measured salinity data. The Brockway model's salinity predictions performs well to observations especially in downstream reaches of the two estuaries (Sebou: R² = 0.95, root mean square error [RMSE] = 1.50‰, normalized root mean square error [NRMSE] = 3.45‰; Loukkos: R² = 0.95, RMSE = 1.13‰, NRMSE = 3.01‰), while the Savenije model outperformed the Brockway's model and is better to predict salt intrusion length and salinity variation along the two estuaries (Sebou: R² = 0.97, RMSE = 1.15‰, NRMSE = 2.85‰; Loukkos: R² = 0.98, RMSE = 0.95‰, NRMSE = 1.94‰). This revealed that both analytical solutions apply well to the estimation of salinity variation and the prediction of salt intrusion in these two estuaries.     

Synthetic logs of multipole sources in boreholes based on the Kelvin–Voigt stress–strain relation

We design a numerical algorithm for wave simulation in a borehole due to multipole sources. The stress–strain relation of the formation is based on the Kelvin–Voigt mechanical model to describe the attenuation. The modelling, which requires two anelastic parameters and twice the spatial derivatives of the lossless case, simulates 3-D waves in an axisymmetric medium by using the Fourier and Chebyshev methods to compute the spatial derivatives along the vertical and horizontal directions, respectively. Instabilities of the Chebyshev differential operator due to the implementation of the fluid–solid boundary conditions are solved with a characteristic approach, where the characteristic variables are evaluated at the source central frequency. The algorithm uses two meshes to model the fluid and the solid. The presence of the logging tool is modelled by imposing rigid boundary conditions at the inner surface of the fluid mesh. Examples illustrating the propagation of waves are presented, namely, by using monopoles, dipoles and a quadrupoles as sources in hard and soft formations. Moreover, the presence of casing and layers is considered. The modelling correctly simulates the features—traveltime and attenuation—of the wave modes observed in sonic logs, namely, the P and S body waves, the Stoneley wave, and the dispersive S waves in the case of multipole sources.     

Study of Laboratory Induced Self-Reversed Thermoremanent Magnetization and the Fe-Ti Oxides of the Dacite Ash from the 1991 Pinatubo Eruption (Philippines)

The dacite ash from the 1991 Pinatubo eruption was studied. Three Fe-Ti magnetic phases were detected within the dacite ash: the ilmenite-hematite (ilm-hem) with the Curie temperature T _C 220°C, in first heating, with a compositional parameter y 0.50; but more stable form after heating is with T _C1 260°C and y 0.46; the titanomagnetite (TM) with the T _C 455°C (more stable phase is that with T _C2 475°C and x 0.13, after an original sample was heated to 700°C); the Fe-Ti phase of T _C 512°C corresponding to the TM of lower content of Ti, which is stable against the temperature influence to 700°C. The study of the self-reversed thermoremanent magnetization (SR TRM) was arranged with the dacite ash fixed within the nonmagnetic gypsum. The dacite ash is able to acquire the SR TRM within 430-25°C. The results of the induced pTRM have shown that the dominant acquisition of SR pTRM takes place within both 430-350°C and 310-230°C intervals during inducing the pTRM, but the pTRM of very low intensity was induced also within a separate interval of 630-510°C. Only the pTRM of the positive polarity was induced within the 510-430°C and 230-70°C intervals. An interesting thing is that the SR pTRM is acquired at much higher temperatures (of about 200°C higher) than the T _C of the ilm-hem phase. The stage of the TRM or pTRM of the dacite ash is strongly dependent on the mode of temperature treatment of samples. An inverse ratio between the intensity of the SR pTRM and the content of the Fe-Ti magnetic grains has pointed out, that inter-grain interactions, probably of magnetostatic origin, are topical in the dacite ash during thermal treatment. The behaviour of the SR TRM of the dacite ash during cooling and heating in the low temperature interval (to temperature of the liquid nitrogen) is supposed to be similar to that of the hematite below its Morin transition temperature (T _M). Evidently, the Ilm-hem is the main component which takes part in producing of the SR TRM of the dacite ash. We have not presented separate own model about the mechanism and origin of SR TRM, but we have accepted the model of Ozima and Funaki, shortly described in this article.