Possibilities of GPS Kinematic Measurements for Geological Survey in East Slovakia

This paper deals with transformation procedures for observed GPS data from the world geodetic system WGS-84 into the national geodetic grid datum S-UTCN(system of united trigonometric cadaster network) and Baa(the Baltic Sea after adjustment).Transformation from WGS-84 into SUTCN is performed most frequently by means of the 7-element Helmert transformation with three identical points.Geodetic network was adjusted by two ways.     

基于最短路径的扩展泰森多边形建立

由于传统的泰森多边形是对空间不考虑路径距离的一种分割方式，使得其在很多领域的应用受到了限制，尤其是在城市规划和沿路径分析等方面表现更为突出。针对这种情况，文中提出一种基于最短路径的扩展泰森多边形的建立方法，并对这种泰森多边形的应用前景提出了自己的看法。     

共线条件方程式教学中的几个问题

指出了共线条件方程式教学中应注意的一些问题：共线条件方程式是联立的两个平面方程式，存在双主距（fx,fy)时的几何概念，以及它的变换式与直接线性变换关系式的异同点。     

Introducing sensor spectral response into the classification process

Many sensors have their bands overlapped and therefore do not set a normal space. If a spectral distance is measured, as in first-order statistical classifiers, the direct consequence is that the result will not be the most accurate. Image classification processes are independent of the spectral response function of the sensor, so this overlap is usually ignored during image processing. This paper presents a methodology that introduces the spectral response function of sensors into the classification process to increase its accuracy. This process takes place in two steps: first, incident energy values of the sensors are reconstructed; second, the energy of the bands is set in an orthonormal space using a matrix singular value decomposition. Sensors with and without overlapping spectral bands were simulated to evaluate the reconstruction of energy values. The whole process was implemented on three types of images with medium, high and very high spatial resolution obtained with the sensors ASTER, IKONOS and DMC camera, respectively. These images were classified by ISODATA and minimum distance algorithms. The ISODATA classifier showed well-defined features in the processed images, while the results were less clear in the original images. At the same time, the minimum distance classifier showed that overall accuracy of the processed images increased as the maximum tolerance distance decreased compared to the original images.     

Texture augmented detection of macrophyte species using decision trees

Image classification using multispectral sensors has shown good performance in detecting macrophytes at the species level. However, species level classification often does not utilize the texture information provided by high resolution images. This study investigated whether image texture provides useful vector(s) for the discrimination of monospecific stands of three floating macrophyte species in Quickbird imagery of the South Nation River. Semivariograms indicated that window sizes of 5 × 5 and 13 × 13 pixels were the most appropriate spatial scales for calculation of the grey level co-occurrence matrix and subsequent texture attributes from the multispectral and panchromatic bands. Of the 214 investigated vectors (13 Haralick texture attributes * 15 bands + 9 spectral bands + 10 transformations/indices), feature selection determined which combination of spectral and textural vectors had the greatest class separability based on the Mann–Whitney U-test and Jefferies–Matusita distance. While multispectral red and near infrared (NIR) performed satisfactorily, the addition of panchromatic-dissimilarity slightly improved class separability and the accuracy of a decision tree classifier (Kappa: red/NIR/panchromatic-dissimilarity – 93.2% versus red/NIR – 90.4%). Class separability improved by incorporating a second texture attribute, but resulted in a decrease in classification accuracy. The results suggest that incorporating image texture may be beneficial for separating stands with high spatial heterogeneity. However, the benefits may be limited and must be weighed against the increased complexity of the classifier.     

遥感影像大气校正通用查找表的设计与插值算法

大气参数查找是遥感图像大气校正中一个重要的步骤。本文针对当前多数大气参数查找表普适性不强、查找表数据存储空间巨大、具体实施步骤不详细的问题,建立了一个通用化的多维大气参数查找表,其光谱分辨率为1 nm,并适用于多种遥感传感器。本文采用二进制文件方式存储查找表,并研究采用多维拉格朗日和多维反距离加权插值方法对输入参数进行插值。结果表明以二进制文件方式存储查找表,不但可以最大化地减少磁盘存储空间,还可以实现查找表数据快速随机读取;相对于多维反距离加权插值方法,多维拉格朗日插值方法的速度更快,精度更高,与MODTRAN4.0模型计算结果(真值)相比,它的误差仅为±1.0%左右。     

Possibilities of GPS kinematic measurements for geological survey in East Slovakia

This paper deals with transformation procedures for observed GPS data from the world geodetic system WGS-84 into the national geodetic grid datum S-UTCN (system of united trigonometric cadaster network) and Baa (the Baltic Sea after adjustment). Transformation from WGS-84 into SUTCN is performed most frequently by means of the 7-element Helmert transformation with three identical points. Geodetic network was adjusted by two ways.     

地理要素的分布式空间近似查询处理方法

针对传统空间查询无法满足地理数据交互式可视化对处理时间要求的问题,以窗口查询为例,提出了一种空间近似查询处理方法。该方法包括预处理和查询两步:在预处理阶段,利用分布化的线简化算法对空间对象进行顾及误差的预处理采样,将采样过程及误差值用树型结构保存;在查询阶段,以豪斯多夫距离定义数据可视化的误差,进行误差可知的顶点即时采样与截取,从而实现针对可视化应用的高效的空间近似查询处理。在Hadoop集群上利用77GB的OpenStreetMap数据集进行了实验,证实了本方法的效力与效率。     

基于距离和姿态观测量的GNSS基线网平差方法

针对目前单历元算法需要连续观测较长时间才能够得到较为精确的解算结果的问题,利用载具同时架设3台GNSS接收机,获得基线观测量,同时事先精确测定接收机之间的距离,并利用陀螺仪获得载具的姿态角,通过增加距离和姿态观测量,与基线观测量共同进行平差处理,可以得到单历元较为稳定而精确的坐标解算结果。试验表明,平面精度在10 mm以内,高程精度在3 cm以内,相较于不添加距离和姿态观测量的结果精度提高了15%以上。     

一种启发式有环河系自动分级算法

在地图综合中,河流分级是对水系要素表达的重点也是技术难点,对精确性和计算速度都有较高的要求。目前对河系分级的研究中,已有分级算法的效率较低,且鲜有针对有环河系的分级。基于此,本文建立了河系分级的属性规则、几何规则、环规则,对河系中存在的不同环类型进行了分类处理,且在求取河流最长路径时,运用启发式算法迭代计算,实现了河系的自动分级。实际河系数据试验表明,该算法能在对有环河系的处理中取得良好的效果,提高了河系分级的计算效率和准确度。