涉及埃达克岩实验的若干基本概念与问题辨析

根据热力学原理,部分熔融是相变的一种表现形式。当岩石沿p-T轨迹穿过固相线时即可发生熔融。自然界岩石常见的不一致熔融行为可以导致残留相具有不同于源岩的整体成分与矿物组合。残留相与源岩可以属于不同的变质相,岩性也可以不同。"C型埃达克岩"含有含水矿物,它们不是干体系熔融的产物。实验岩石学研究表明,基性成分(SiO_250%)体系较中性、酸性体系在1.0~2.0 GPa压力条件下失水熔融时更易于形成"榴辉岩质"的残留相。源岩除SiO_2以外的其它主要氧化物会影响残留相中各矿物的比例,进而影响熔体的Sr、Y及HREE含量。因此,"C型埃达克岩"高Sr低HREE特征的形成取决于熔融温压条件以及源岩的主量元素、微量元素组成等多重因素。高钾含量(K_2O≈1.0%)的基性、中基性源岩形成的熔体成分与"C型埃达克岩"相比过于富Al或富Na。中等富钾的基性源岩的低程度熔融可以形成高硅的"C型埃达克岩",但无法形成中性的"C型埃达克岩"。     

The effects of yawing motion with different frequencies on the hydrodynamic performance of floating vertical-axis tidal current turbines

Under real sea conditions, the hydrodynamic performance of floating vertical-axis tidal current turbines is affected by waves and currents. The wave circular frequency is a significant factor in determining the frequencies of the wave-induced motion responses of turbines. In this study, the ANSYS-CFX software (manufacturer: ANSYS Inc., Pittsburgh, Pennsylvania, United States) is used to analyse the hydrodynamic performance of a vertical-axis turbine for different yawing frequencies and to study how the yawing frequencies affect the main hydrodynamic coefficients of the turbine, including the power coefficient, thrust coefficient, lateral force coefficient, and yawing moment coefficient. The time-varying curves obtained from the CFX software are fitted using the least-squares method; the damping and added mass coefficients are then calculated to analyse the influence of different yawing frequencies. The simulation results demonstrate that when analysing non-yawing turbines rotating under constant inflow, the main hydrodynamic coefficient time-varying curves of yawing turbines exhibit an additional fluctuation. Furthermore, the amplitude is positively correlated with the yawing frequency, and the oscillation amplitudes also increase with increasing yawing frequency; however, the average values of the hydrodynamic coefficients (except the power coefficient) are only weakly influenced by yawing motion. The power coefficient under yawing motion is lower than that under non-yawing motion, which means that yawing motion will cause the annual energy production of a turbine to decrease. The fitting results show that the damping term and the added mass term exert effects of the same level on the loads and moments of vertical-axis turbines under yawing motion. The results of this study can facilitate the study of the motion response of floating vertical-axis tidal current turbine systems in waves.     

Axial friction response of full-scale pipes in soft clays

The axial friction response of subsea pipelines in soft clays is a very important aspect for designers of subsea pipelines but the response is not well understood so far. There is a pressing need for the comprehension of the response. In this paper, model tests are performed using full-scale pipes coated with polyethylene (PE) to study the effects of the set-up period, the pipe diameter, the buried depth of the pipe, the shear strength of soft clays and the loading rate on the axial friction response of pipelines in soft clays. The variations of the axial friction coefficient are analyzed using the effective stress method based on model test results. The results show that the axial friction resistance increases with the increasing pipe diameter but the effect of the pipe diameter on the axial friction coefficient can be neglected. The ultimate axial resistance also increases with the increase of the buried depth of pipelines, the undrained shear strength of soft clays and the loading rate. The axial friction coefficient increases with the increasing loading rate. However, the axial friction coefficient decreases with the increasing buried depth. The method to determine the axial friction coefficient is developed by analyzing model test results, which considers the effects of the diameter, the buried depth, the undrained shear strength of soft clays and the loading rate. The study results not only extend the industry data base but also supply a basis to determine the axial friction coefficient of PE-coated pipes in soft clays for ocean engineering geological investigations.     

Calculation method for thickness of discontinuous boundary layer of engineering pavement

The boundary layer is a buffer layer of water and heat exchange between the atmosphere and permafrost.Based on the atmospheric boundary layer and heat transfer theory,we established a method for determining the boundary layer thickness of engineering pavement(asphalt and sand pavement)in permafrost region.The boundary layer can be divided into the Boundary Layer Above Surface(BLAS)and the Boundary Layer Below Surface(BLBS).From in-situ monitoring data,the thickness of BLAS was determined through the laminar thickness,and the thickness of BLBS was determined through ground temperature,the heat conduction function,and the mean attenuation function(α).For asphalt pavement,the BLAS thickness varied between 2.90 and 4.31 mm and that of BLBS varied between 28.00 and 45.38 cm.For sand pavement,the BLAS thickness varied between 2.55 and 3.29 mm and that of BLBS varied between 15.00 and 46.44 cm.The thickness varied with freezing and thawing processes.The boundary layer calculation method described in this paper can provide a relatively stable boundary for temperature field analysis.     

Experimental Measurements of Solitary Wave Attenuation Over Shallow and Intermediate Submerged Canopy

Attenuations of solitary wave over a patch of submerged canopy are experimentally investigated. The submerged canopy is modeled by a group of circular cylinder array. The decay coefficients of different wave heights in two water depths along the wave flume are measured for six canopy models, including two canopy heights and three styles of arrangements. The relationships among the decay coefficient, and the dimensionless wave height, submergence ratio, relative height and arrangement of the canopy are experimentally studied. 2D PIV technique is employed to measure the representative flow field inside the canopy. A four-deck flow structure is proposed for wave flow field over shallow submerged canopy. The characteristics of shear flow inside the aligned canopy region are discussed.     

Effects of Column Diameter on Setting Behavior of Dredged Slurry in Sedimentation Experiments

This article investigates the influence of dimensions of a settling column on the settling mode and the settling rate. End conditions of the settling stage in the hindered settling were also analyzed. It was found that the settling mode in a column with a smaller diameter tends to be consolidation settling. The effect of a settling column wall decreases with increasing column diameter, and it can be ignored provided the column diameter is larger than 14.5 centimeters. For the difference in initial water content, the settling behavior of the slurry develops a different sensitivity to the diameter effect. The influence of column diameter reduces as the initial water content of the slurry becomes higher. It is suggested that the internal diameter of the column used in a sedimentation experiment should be 14.5 centimeters.     

区域地球化学评价中变异系数校正参数的意义

通过对我国新疆西天山各地球化学区数据的归纳和研究,计算西天山12种常见成矿元素在各地球化学区的富集系数,提出校正系数公式,并将变异系数进行合理的校正与排序。与实际矿床和矿点结合,验证校正系数的正确性和适用性,预测元素成矿有利顺序和规律,总结出西天山富集系数与变异系数在成矿中的制约关系。该方法实现了不同成矿元素之间成矿条件的对比,拓宽了地球化学参数的适用性,提高了在勘探程度较低的地区地球化学评价方法的准确性,为地球化学评价提供科学依据。     

崩塌堆积体启动坡面泥石流判别与防治 ——以北川县开坪乡平石板泥石流为例

强震区地震后大量的崩塌堆积体堆积于高陡斜坡中上部,堆积体远离居民点,一旦诱发为坡面泥石流,形成新的次生地质灾害,将严重威胁下方居民的生命财产安全。本文以北川县开坪乡平石板坡面泥石流为例,平石板沟“5.12”地震崩塌堆积体在2010、2013年强降雨作用下失稳转变为坡面泥石流淤积场镇。在平石板泥石流暴发特征介绍基础上,通过粒径不均匀系数、堆积体启动判别指标、后缘汇水面积等来分析崩塌堆积体启动条件及影响因素,并针对此类灾害发育特征,提出了通过上游稳拦固源方法进行治理的防治思路。以期为研究高陡斜坡堆积体的启动机制及防治提供一定的借鉴意义。     

北极斯瓦尔巴、高亚洲和阿尔卑斯山冰川物质平衡对比研究

基于冰川物质平衡和平衡线高度数据,对北极斯瓦尔巴、高亚洲和阿尔卑斯山的冰川物质平衡变化和平衡线高度空间分布特征进行了对比分析,得出以下结论：（1）阿尔卑斯山冰川年均负物质平衡值最大,为-907 mm;斯瓦尔巴为-431 mm;高亚洲最小,为-264 mm。（2）高亚洲和斯瓦尔巴冰川物质平衡年振幅较小,年际变化较小;阿尔卑斯山冰川物质平衡年振幅较大,年际变化较大。斯瓦尔巴冰川物质平衡趋向正平衡,阿尔卑斯山和高亚洲冰川物质平衡趋向负平衡。（3）斯瓦尔巴内陆的冰川平衡线高度高于沿海地区,高亚洲冰川平衡线高度呈纬向地带性、经向地带性和区域地带性的分布规律,阿尔卑斯山的冰川平衡线高度主要受冰川所处海拔的影响。     

逻辑回归模型在边坡稳定性分析中的应用

采用逻辑回归模型和确定性系数CF建立概率模型,使用收集到的22个边坡实例,将重度、内聚力、坡角、坡高、内摩擦角和孔隙压力比六个影响因子作为自变量,边坡状态作为因变量,应用SPSS取不同的滑坡概率P与不滑坡概率1-P的比值的自然对数Z进行回归分析。将获得的滑坡概率拟合模型反馈到样本参数上,对比其误差,选取Z=±10时的函数模型对另外8组边坡进行验证,证明预测模型的合理性。