In-line response of a cylinder in oscillatory flow

The most widely used mathematical model to represent flow-induced in-line forces on structures is based on the Morison¹ equation. The present paper investigates the validity of using an extension of Morison's equation for non-stationary structures, by comparing predictions with results from a simple laboratory experiment. An elastically-mounted circular cylinder is placed in the sinusoidal flow of a U-tube, and responds in-line with the flow. Cylinder forces and responses are recorded over a range of Keulegan Carpenter numbers up to 35. An equation of motion is solved simply by using relative coordinates and by employing equivalent linearisation. The linear results are compared over a wide variation of parameters with solutions using the full nonlinear equation. Thereafter experimental results are compared with linear predictions.     

分离入射波与反射波的解析方法

提出了一种新的分离入射波和反射波的解析方法（AM）。利用两点处的 波高信息，运用Hilbert变换得到波浪信号在复域内的解析表达式，不需要计算合成波高和相位差即可实现信号的分离。根据分离结果，可以精确地估计入射波与反射波的幅值以及反射系数等参数，能够获得入射波与反射波之间的相位信息，并且可方便地用于不规则波的分离。文中通过数值模拟与物理模型实验对AM法进行了检验，所得的结果与实际值非常吻合。     

Parameter identification of a compliant nonlinear SDOF system in random ocean waves by reverse MISO method

The determination of the drag and inertia coefficients, which enter into the wave force model given by Morison's equation, is particularly uncertain and difficult when a linear spectral model is used for ocean waves, and the structure is compliant and has nonlinear dynamic response. In this paper, a nonlinear System Identification method, called Reverse Multiple Inputs–Single Output (R–MISO) is applied to identify the hydrodynamic coefficients as well as the nonlinear stiffness parameter for a compliant single-degree-of-freedom system. Four different types of problems have been identified for use in various situations and the R–MISO has been applied to all of them. One of the problems requires iterative solution strategy to identify the parameters. The method has been found to be efficient in predicting the parameters with reasonable accuracy and has the potential for use in the laboratory experiments on compliant nonlinear offshore systems.     

湍流数值模拟中封闭模式应用的局限性

通过对琼州海峡的潮流场特征进行数值模拟，指出了选择不同的特征混合长度表达式对数值模拟结果的影响，表明了基于特征混合长度理论的流封闭模式在近海湍流数值模拟中应用的局限性。     

旋转谱理论探讨

本文应用向量随机过程分解模型对旋转谱作出物理解释;此外,还修改了线性振荡度的定义,导出了极化度、线性振荡度和旋转系数之间的关系式,并讨论了它们与总相干、同相相干、异相相干之间的关系。     

南沙群岛海域水体漫衰减系数Kd(490)的特性研究

对南沙群岛海区水体Kd(490）的特性进行了深入分析和探讨,研究结果表明：Kd（490）的垂直分布与同步测量的海水叶绿素a浓度的垂直分布有很强的相关性;Kd（490）的垂直分布反映出该区域海水存在较强的分层现象,研究中还发现上行辐亮度漫衰减系数KL（490）与Kd（490）垂直变化趋势相当一致,但是以二者达到最大值的深度为界,上层水体的KL（490）值稍大于Kd(490）值,在这一深度以下则相反。     

Prediction of Load Carrying Capacity of Corroded Reinforced Concrete Beam

A novel method for prediction of the load carrying capacity of a corroded reinforced concrete beam (CRCB) is presented in the paper. Nine reinforced concrete beams, which had been working in an aggressive environment for more than 10 years, were tested in the laboratory. Comprehensive tests, including flexural test, strength test for corroded concrete and rusty rebar, and pullout test for bond strength between concrete and rebar, were condueted. The flexural test results of CRCBs reveal that the distribution of surface cracks on the beams shows a fractal behavior. The relationship between the fractal dimensions and mechanical properties of CRCBs is then studied. A prediction model based on artificial neural network (ANN) is established by the use of the fractal dimension as the corrosion index, together with the basic intbrmation of the beam. The validity of the prediction model is demonstrated through the experimental data, and satisfactory resuits are achieved.     

半封闭海湾潮间带部分围垦后纳潮量计算的商榷——以胶州湾为例

传统的海湾(泻湖)纳潮量计算方法不能精确地反映潮间带被部分围垦后纳潮量的实际情况,本考虑围堤的影响,将纳潮量分解为堤基以下的“梯形”区和堤基以上的“矩形”区两部分之和,在理论上更加严密。根据改进后方法算出的胶州湾近期纳潮量比传统方法算出的纳潮量大15％左右。可见,半个多世纪以来胶州湾的纳潮量只减少了约15％．而不是传统方法得出的约25％。     

均匀土质边坡稳定性计算的一种新方法

根据土力学原理 ,推导出一种在不考虑渗流力的情况下 ,确定斜坡临界滑动面和计算斜坡稳定系数的新方法。介绍了该方法在若干土石方工程中的应用实例。