Investigation of OMA formation and the effect of minerals

Oil-mineral-aggregates (OMA) have been shown to be effective in oil spills cleanup. Experimental work was carried out to study the effects of physical-chemical properties of natural minerals and chemically modified minerals on OMA formation and oil removal. The results showed that the hydrophobicity, particle sizes and specific surface of minerals played an important role in OMA formation. Appropriate hydrophobicity of minerals can enhance the formation of OMA. The surface property of minerals can also influence the shape of OMA. Spherical mineral-oil aggregates were frequently formed with hydrophilic minerals while irregular shaped OMA were observed with hydrophobic minerals. The sizes of OMA also increased when the minerals changed from hydrophilic to hydrophobic. The effects of dispersant and mixing energy were also carefully studied. The results showed that dispersant were a dominant factor. When dispersant was applied, effects of other factors became minimal.     

Self‐centering structural systems with combination of hysteretic and viscous energy dissipations

This paper presents an innovative set of high‐seismic‐resistant structural systems termed Advanced Flag‐Shaped (AFS) systems, where self‐centering elements are used with combinations of various alternative energy dissipation elements (hysteretic, viscous or visco‐elasto‐plastic) in series and/or in parallel. AFS systems is developed using the rationale of combining velocity‐dependent with displacement‐dependent energy dissipation for self‐centering systems, particularly to counteract near‐fault earthquakes. Non‐linear time‐history analyses (NLTHA) on a set of four single‐degree‐of‐freedom (SDOF) systems under a suite of 20 far‐field and 20 near‐fault ground motions are used to compare the seismic performance of AFS systems with the conventional systems. It is shown that AFS systems with a combination in parallel of hysteretic and viscous energy dissipations achieved greater performance in terms of the three performance indices. Furthermore, the use of friction slip in series of viscous energy dissipation is shown to limit the peak response acceleration and induced base‐shear. An extensive parametric analysis is carried out to investigate the influence of two design parameters, λ₁ and λ₂ on the response of SDOF AFS systems with initial periods ranging from 0.2 to 3.0 s and with various strength levels when subjected to far‐field and near‐fault earthquakes. For the design of self‐centering systems with combined hysteretic and viscous energy dissipation (AFS) systems, λ₁ is recommended to be in the range of 0.8–1.6 while λ₂ to be between 0.25 and 0.75 to ensure sufficient self‐centering and energy dissipation capacities, respectively. Copyright © 2010 John Wiley & Sons, Ltd.     

2009年世界地震活动性和地震灾情概要

2009年地震频度较高,强度较低;地震灾情一般较轻,较重的地区一是印度尼西亚地区,其次是意大利地区。     

利用Q型聚类分析研究鄂尔多斯盆地多种能源矿产间的关系

为揭示鄂尔多斯盆地多种能源矿产间的关系,根据盆地石油、油气伴生水以及煤、煤层夹矸、铀矿及围岩样品的氯仿沥青中57种元素的分析结果,进行了Q型聚类分析。结果表明:侏罗系下统延安组石油、侏罗系中统直罗组石油与三叠系延长组石油有相近的成因特征;三叠系延长组石油沥青、三叠系延长组含油砂岩沥青与侏罗系中统直罗组石油沥青具有类似的成因特征;神木侏罗系下统延安组煤沥青、东胜侏罗系中统直罗组煤沥青、铜川陈家山侏罗系下统延安组煤层石油以及铜川陈家山侏罗系下统延安组煤沥青成因特征相近;铜川陈家山侏罗系下统延安组煤层石油沥青可能与准格尔黑岱沟石炭二叠系煤沥青具有成因上的联系;侏罗系下统延安组石油沥青与放射性铀矿的形成具有密切关系;天然气的物质来源复杂,且与石油和煤的进一步演化有一定关系。鄂尔多斯盆地多种能源矿产成因较复杂、相互间关系密切,且具有多源性成藏(矿)特征。     

点带石斑鱼幼鱼配合饲料的适宜能量蛋白比

以鱼粉和酪蛋白为蛋白源,添加鱼油、豆油、α-马铃薯淀粉、纤维素以及适量的维生素和矿物质配制成实验饲料,蛋白质质量分数设置41%、47%、53%3个水平,能量设置12 561、14 655、16 748 kJ/kg 3个水平,饲养点带石斑鱼幼鱼59 d后,以增重率、蛋白质效率、饲料系数为评价指标,分析不同能量蛋白比的饲料对点带石斑鱼体内消化酶活性的影响。结果表明:当能量蛋白比分别为31.30、33.50、32.26 kJ/g时,点带石斑鱼增重率、蛋白质效率达到极大值,饲料系数达到极小值;能量蛋白比在31.62～35.54 kJ/g范围内,胃、肠道的蛋白酶、淀粉酶、脂肪酶活性较强。点带石斑鱼幼鱼配合饲料中合适的能量蛋白比为31.62～33.50 kJ/g。     

毛乌素沙地臭柏、油蒿细根分解过程中养分与能量的变化

应用埋袋法对毛乌素沙地天然分布的优势种臭柏、油蒿细根分解进行研究。对两年的实验数据进行分析,结果显示,臭柏、油蒿细根分解过程中C、P、K、Mg均表现为释放,释放率油蒿＞臭柏,元素重量损失率K＞P＞C＞Mg;N在臭柏分解中表现为积累,在油蒿分解中表现为释放;Ca在臭柏、油蒿细根分解中都表现为积累的趋势,积累率为油蒿＞臭柏;能量在臭柏、油蒿细根分解过程中表现为释放。该研究为沙区土壤库中的能量转化和流动过程提供了理论依据。     

An overview of the spatial patterns of land surface processes over arid and semiarid regions

With data from the project Collaborative Observation of Semi-arid/Arid Regions in North China, collected during July and September 2008, the spatial patterns of land surface processes over arid and semiarid regions have been investigated based on the ordinary Kriging interpolation approach. Generally, for the radiation processes, downward and upward short-wave radiation have a uniformly increasing trend with latitude, but the spatial patterns of long-wave radiation present notable regional differences: both upward and downward long-wave radiation increase with latitude in the west of North China, while in the east they vary inversely with latitude, suggesting surface temperature and clouds respectively have feedbacks to the long-wave radiation in the west and east of North China. The surface net radiation basically has a negative latitudinal trend. Long-wave radiation budget plays an important role in the spatial pattern of surface net radiation, particularly in the east of North China, although short-wave radiation budget largely determines the magnitude of surface net radiation. For the energy processes, latent and sensible heat flux varies conversely with latitude: more available land surface energy is consumed by evaporating soil water at lower latitudes while more is used for heating the atmosphere at higher latitudes. A soil heat flux maximum and minimum are found in Loess Plateau and Qinghai Plateau respectively, and a maximum is seen in the northeast China.     

基于纤维模型的空间网架支承体系的优化设计与分析

近年来,民用航空制造业的快速发展给大柱距空间网架结构带来新的契机。本文针对某大柱距厂房设计了无柱间支撑、柱间钢支撑和柱间消能支撑3种抗侧力结构体系。在此基础上,分别建立了3种结构体系的三维整体有限元模型,通过优化设计确立了钢支撑和消能支撑的具体设计参数,并进行了多遇地震作用下的弹性时程对比分析。最后,建立了结构弹塑性分析的纤维模型,对3种结构体系进行了罕遇地震作用下的弹塑性时程分析,对比研究了3种结构体系在大震作用下的倒塌机制。结果表明：采用纤维模型能够较为精确地进行结构的弹塑性时程分析;相较于不加柱间支撑结构体系,柱间钢支撑和柱间消能支撑结构体系在多遇地震作用下的结构层间位移分别衰减约32%和64%,在罕遇地震作用下的结构层间位移分别衰减约12%和46%,且均具有更好的倒塌机制。本文可供大柱距空间结构的设计与分析参考和借鉴。     

土体剪切带的模拟与机理分析

采用修正剑桥模型,研究在平面应变条件下正常固结土剪切带的产生机理和剪切带形状的多样性。研究结果表明,剪切带是由材料的不均匀变形引起,并由试样局部应变能释放的冲击作用形成的;试样端部摩擦约束与试样内部初始缺陷都能够引起试样的不均匀变形进而诱发剪切带。分析了不同边界约束条件、初始缺陷设置方式及二者共同作用对剪切带形式的影响,平面应变条件下土体的剪切带有单一型、交叉型和多段型等3种形式,多段剪切带的发展具有先后顺序。     

Understanding of the Common Land Model performance for water and energy fluxes in a farmland during the growing season in Korea

The Common Land Model (CLM) is one of the most widely used land surface models (LSMs) due to the practicality of its simple parameterization scheme and its versatility in embracing a variety of field datasets. The improved assessment of land surface water and energy fluxes using CLM can be an alternative approach for understanding the complex land–atmosphere interactions in data‐limited regions. The understanding of water and energy cycles in a farmland is crucial because it is a dominant land feature in Korea and Asia. However, the applications of CLM to farmland in Korea are in paucity. The simulations of water and energy fluxes by CLM were conducted against those from the tower‐based measurements during the growing season of 2006 at the Haenam site (a farmland site) in Korea without optimization. According to the International Geosphere–Biosphere Programme (IGBP) land cover classification, a homogeneous cropland was selected initially for this study. Although the simulated soil moisture had a similar pattern to that of the observed, the former was relatively drier (at 0·1 m³ m^?3) than the latter. The simulated net radiation showed good agreement with the observed, with a root mean squared error (RMSE) of 41 W m^?2, whereas relatively large discrepancies between the simulation and observation were found in sensible (RMSE of 66 W m^?2) and latent (RMSE of 60 W m^?2) heat fluxes. On the basis of the sensitivity analysis, soil moisture was more receptive to land cover and soil texture parameterizations when compared to soil temperature and turbulent fluxes. Despite the uncertainty in the predictive capability of CLM employed without optimization, the initial performance of CLM suggests usefulness in a data‐limited heterogeneous farmland in Korea. Further studies are required to identify the controls on water and energy fluxes with an improved parameterization. Copyright © 2010 John Wiley & Sons, Ltd.