天然气水合物研究现状与展望

自20世纪90年代以来,世界各国对潜力巨大的新型能源———天然气水合物的研究做了大量的投入,已经取得了重大进展。本文在阐述国外天然气水合物的研究现状的同时,重点介绍了我国在天然气水合物勘探开发和实验模拟方面取得的一些进展,并展望其在能源、环境和其它研究领域的发展前景。     

层控夕卡岩型矿床成矿系统的元素活动性及质量迁移--以铜陵冬瓜山铜矿床为例

应用改善了的质量平衡方程研究冬瓜山层控夕卡岩型铜矿床成矿系统的元素活动性及质量迁移，结果表明：系统中Zr,Hf,Y和Nb为不活动元素，其余均为活动元素。主量元素中仅CaO为迁出组分，其质量迁移量为84％，其余均为带入组分，带入量最大的SiO2的质量迁移量高达2384％；稀土元素均为带入组分，其中，中稀土较轻稀土和重稀土的活动性更强；其它微量元素中，带入序列由强到弱为：Cr→Ta→Sn→Th，迁出序列由强至弱依次为：U→Sb→Ni—Sr→Ba→Bb→Co→W；成矿元素Cu和Ag为带入组分，其中Cu的带入量最大，质量迁移量高达1200％。本文还得出两点具普适性认识：①稀土元素较其它微量元素对体系条件的变化更为敏感，且往往表现出明显的规律性变化，能更好地示踪地质地球化学过程。②不同元素在不同体系中的行为特征差异极大，仅凭经验判定某一元素为不活动元素往往不可靠。因此，在开展质量平衡研究时，首先采用适当方法确认体系的不活动元素是一项不可或缺的前提工作。     

变频调速器在齐鲁石化供排水厂的推广与应用

近年来低压变频器已得到广大企业用户的认可,并显示出它的节能效果,文章介绍了变频器在齐鲁石化水厂的应用,对比改造前后的工作状况和在节能、节电、提高自动化水平及电路设计等方面的功能和特点.     

鄂尔多斯盆地中部奥陶系方解石脉中包裹体流体势研究

结合前人研究成果，归纳出了一种利用盐水包裹体均一温度与盐度确定流体势的方法，并对鄂尔多斯盆地中部气田奥陶系方解石脉中包裹体进行了流体势计算，推算出了古流体运移方向。     

几种常见矿物的接触角测定及其讨论

为了评价矿物表面与特征液体的界面能量，分别测定了长石、石英、黑云母、方解石、萤石和黄铁矿等7种常见矿物与水、正庚烷和正丁醇的接触角，并计算了相应的表面自由能。结果表明同一矿物不同结晶面(晶面)的接触角有一定的差异，这一差异与矿物结构面上原子种类和相对含量差异有一定的对应关系。     

Scaling effects on modeled surface energy-balance components using the NOAH-OSU land surface model

As surface exchange processes are highly non-linear and heterogeneous in space and time, it is important to know the appropriate scale for the reasonable prediction of these exchange processes. For example, the explicit representation of surface variability has been vital in predicting mesoscale weather events such as late-afternoon thunderstorms initiated by latent heat exchanges in mid-latitude regions of the continental United States. This study was undertaken to examine the effects of different spatial scales of input data on modeled fluxes, so as to better understand the resolution needed for accurate modeling. A statistical procedure was followed to select two cells from the Southern Great Plains 1997 hydrology experiment region, each 20 km×20 km, representing the most homogeneous and the most heterogeneous surface conditions (based on soil and vegetation) within the study region. The NOAH-OSU (Oregon State University) Land Surface Model (LSM) was employed to estimate surface energy fluxes. Three scales of study (200 m, 2 and 20 km) were considered in order to investigate the impacts of the aggregation of input data, especially soil and vegetation inputs, on the model output. Model results of net radiation and latent, sensible and ground heat fluxes were compared for the three scales. For the heterogeneous area, the model output at the 20-km resolution showed some differences when compared with the 200-m and 2-km resolutions. This was more pronounced in latent heat (12% decrease), sensible heat (22% increase), and ground heat flux (44% increase) estimation than in net radiation. The scaling effects were much less for the relatively homogeneous land area with 5% increase in sensible heat and 4% decrease in ground heat flux estimation. All of the model outputs for the 2- and 20-km resolutions were in close agreement. The results suggested that, for this study region, soils and vegetation input resolution of about 2 km should be chosen for realistic modeling of surface exchange processes. This resolution was sufficient to capture the effects of sub-grid scale heterogeneity, while avoiding the data and computational difficulties associated with higher spatial resolutions.     

Efficiency of base isolation systems in structural seismic protection and energetic assessment

This paper concerns the seismic response of structures isolated at the base by means of High Damping Rubber Bearings (HDRB). The analysis is performed by using a stochastic approach, and a Gaussian zero mean filtered non‐stationary stochastic process is used in order to model the seismic acceleration acting at the base of the structure. More precisely, the generalized Kanai–Tajimi model is adopted to describe the non‐stationary amplitude and frequency characteristics of the seismic motion. The hysteretic differential Bouc–Wen model (BWM) is adopted in order to take into account the non‐linear constitutive behaviour both of the base isolation device and of the structure. Moreover, the stochastic linearization method in the time domain is adopted to estimate the statistical moments of the non‐linear system response in the state space. The non‐linear differential equation of the response covariance matrix is then solved by using an iterative procedure which updates the coefficients of the equivalent linear system at each step and searches for the solution of the response covariance matrix equation. After the system response variance is estimated, a sensitivity analysis is carried out. The final aim of the research is to assess the real capacity of base isolation devices in order to protect the structures from seismic actions, by avoiding a non‐linear response, with associated large plastic displacements and, therefore, by limiting related damage phenomena in structural and non‐structural elements. In order to attain this objective the stochastic response of a non‐linear n‐dof shear‐type base‐isolated building is analysed; the constitutive law both of the structure and of the base devices is described, as previously reported, by adopting the BWM and by using appropriate parameters for this model, able to suitably characterize an ordinary building and the base isolators considered in the study. The protection level offered to the structure by the base isolators is then assessed by evaluating the reduction both of the displacement response and the hysteretic dissipated energy. Copyright © 2003 John Wiley & Sons, Ltd.     

A quantitative study of the energy release in the aftershocks of the Bhuj earthquake, 2001, India, using Lg phase

The devastating earthquake on 26 January 2001 at Bhuj, India, resulted in large-scale death and destruction of properties of several million US dollars. The moment magnitude of the earthquake was 7.7 and its maximum focal intensity exceeded X in MM scale. The rate of aftershocks of this earthquake, recorded at Gauribidanur seismic array station (GBA), shows a monotonic decay with time superposed with oscillations. For the Indian continent the Lg phase is a prominent arrival at regional distances. The estimate of Lg amplitude is obtained by optimally fitting the Lg wave train to a exponential decay curve. The logarithm of these amplitudes and logarithm of root mean square (rms) value of actual amplitudes of the Lg are calibrated with USGS m_b to create a local m_bLg magnitude scale. The energy released from these aftershocks is calculated from the rms value of Lg phase. The plot of cumulative energy release with time follows the power law of the form t^p, superposed with oscillations. The exponent of the power law, p, is estimated both by a time-window scanning method and by an interpolation method. The value of p is 0.434 for time-window scanning method and 0.432 for the interpolation method. The predominant periods found in the oscillatory part of the cumulative energy, obtained by differencing the observed from the power law fit, are 10.6, 7.9, 5.4, 4.6 and 3.5 h for time-window scanning method. The corresponding periods for interpolation method are 13.4, 11.5, 7.4, 4.2, 3.5, 2.6 and 2.4 h.     

Optimal distribution of linear control intensity over the frequency range

In this paper, a control strategy for structural systems is proposed and developed in the frequency domain. The algorithm is substantially based on a linear derivative feedback and a convolution of the control parameter, whose distribution in the frequency field is chosen in such a manner as to comply with the requirements of an ad hoc formulated constrained optimum problem, with the response data monitored until the instant of control action application. Some numerical testing is carried out by referring to given recorded accelerograms, showing a good performance of the proposed approach. Copyright © 2002 John Wiley & Sons, Ltd.     

A procedure for evaluating seismic energy demand of framed structures

Energy serves as an alternative index to response quantities like force or displacement to include the duration‐related seismic damage effect. A procedure to evaluate the absorbed energy in a multistorey frame from energy spectra was developed. For low‐ to medium‐rise frames, it required a static pushover analysis of the structure to determine the modal yield force and ductility factor of an equivalent single‐degree‐of‐freedom system for the first two modes. The energy spectra were then used to determine the energy contribution of each mode. A procedure was also developed to distribute the energy along the frame height based on energy shapes. This study showed that the second‐mode response in some cases needs to be considered to reflect the energy (or damage) concentration in the upper floors. Copyright © 2002 John Wiley & Sons, Ltd.