中山市绿色生态小区规划建设研究

在深入解析绿色生态小区实质内涵的基础上，综合评述了中山市绿色生态小区建设在概念理解、小区景观建设、住宅建设经济性及和谐统一等方面存在的主要问题，结合中山近年城市建设发展情况，从提高城市竞争力、提升城市品位和促进“两个适宜”城市发展目标的实现等方面具体分析了中山绿色生态小区建设的实践意义。最后从做好宣传、提高市民意识、推动实施政策等方面提出今后中山绿色生态小区发展之建议，以期促进中山城市的良性运作和健康发展。     

岩溶区集中式饮用水源地水质评价与保护——以毕节市倒天河水库和利民水库为例

采用SPSS软件，对2003年01月至2004年12月期间，倒天河水库和利民水库逐月水质监测数据进行数理统计分析，结果表明毕节市饮用水水质污染有较明显的季节变化和空间差异；且不同污染物对水体污染的贡献率各不相同，总磷和粪大肠菌群所占份额最大，方差累积贡献率达77％。在此基础上，利用加权综合污染指数对水体水质污染现状进行综合评价，结果显示倒天河水库和利民水库，水质污染总体较轻．饮用水水质符合《地表水环境质量标准（GB3838—2002）》中Ⅲ类水质标准；最后提出加大水环境保护的建议。     

预测陕西关中地区需水量的改进GM(1,1)模型

需水量评价与预测是水资源规划与管理一项重要的研究内容。本文采用定额法计算需水量。通过对陕西关中地区需水量要素组成的分析,认为需水量要素属平稳时间序列,且一阶累加生成数据系列满足指数规律,符合灰色预测条件。为了提高GM(1,1)模型的精度,采用一种改变背景值的新方法,即:中心逼近方法。通过精度检验,中心逼近式GM(1,1)模型平均误差百分比、误差平方和分别比传统的GM(1,1)模型提高了0.147和1.579。用中心逼近式GM(1,1)模型预测需水量各要素近期和中长期值,经检验,其中非农业人口、农业人口、耕地面积、工业总产值预测模型满足一级模型,等级为良好。牲畜头数预测模型为不合格模型,分析其原因,主要是因为时间序列数据不完全符合指数规律。通过定额法计算,预计75%保证率时2005年和2010年关中地区工农业需水量分别占总需水量的92.21%和89.75%,生活需水量分别占7%和9.04%。     

近45 a来中国西北年极端高、低温的变化及对区域性增暖的响应

利用中国西北五省(区)1960-2004年129个台站逐日最低、最高温度资料,从中统计出年极端高温发生频次、年极端低温发生频次、年极端高温强度、年极端低温强度以及年极端高温和低温开始和结束日期,分析了它们近45 a来的变化情况。结果表明:近45 a来中国西北年极端高温发生频次的增加趋势是明显的,而年极端低温发生频次的减少趋势更显著;中国西北近45 a来年极端高温的强度在不断增强,而极端低温的强度在不断减弱;近45 a来中国西北年极端高温开始日期逐渐提前,结束日期逐渐推迟,而年极端低温的开始日期在逐渐推迟,结束日期在逐渐提前;年极端低温发生频次的减少对于西北区域增暖的响应比年极端高温发生频次增加更显著,而年极端低温强度的减弱要比年极端高温强度的增强对西北区域性增暖的响应偏弱,年极端高温发生频次的增加同年极端高温强度的增强对西北区域性增暖的响应程度基本相当。     

Fluid sources for the La Guitarra epithermal deposit (Temascaltepec district, Mexico): Volatile and helium isotope analyses in fluid inclusions

The La Guitarra deposit (Temascaltepec district, South-Central Mexico), belongs to the low/intermediate sulfidation epithermal type, has a polymetallic character although it is currently being mined for Ag and Au. The mineralization shows a polyphasic character and formed through several stages and sub-stages (named I, IIA, IIB, IIC, IID, and III). The previous structural, mineralogical, fluid inclusion and stable isotope studies were used to constrain the selection of samples for volatile and helium isotope analyses portrayed in this study. The N₂/Ar overall range obtained from analytical runs on fluid inclusion volatiles, by means of Quadrupole Mass Spectrometry (QMS), is 0 to 2526, and it ranges 0 to 2526 for stage I, 0 to 1264 for stage IIA, 0 to 1369 for stage IIB, 11 to 2401 for stage IIC, 19 to 324 for stage IID, and 0 to 2526 for stage III. These values, combined with the CO₂/CH₄ ratios, and N₂-He-Ar and N₂-CH₄-Ar relationships, suggest the occurrence of fluids from magmatic, crustal, and shallow meteoric sources in the forming epithermal vein deposit. The helium isotope analyses, obtained by means of Noble Gas Mass Spectrometry, display R/Ra average values between 0.5 and 2, pointing to the occurrence of mantle-derived helium that was relatively diluted or “contaminated” by crustal helium. These volatile analyses, when correlated with the stable isotope data from previous works and He isotope data, show the same distribution of data concerning sources for mineralizing fluids, especially those corresponding to magmatic and crustal sources. Thus, the overall geochemical data from mineralizing fluids are revealed as intrinsically consistent when compared to each other.The three main sources for mineralizing fluids (magmatic, and both deep and shallow meteoric fluids) are accountable at any scale, from stages of mineralization down to specific mineral associations. The volatile and helium isotope data obtained in this paper suggest that the precious metal-bearing mineral associations formed after hydrothermal pulses of predominantly oxidized magmatic fluids, and thus it is likely that precious metals were carried by fluids with such origin. Minerals from base-metal sulfide associations record both crustal and magmatic sources for mineralizing fluids, thus suggesting that base metals could be derived from deep leaching of crustal rocks. At the La Guitarra epithermal deposit there is no evidence for an evolution of mineralizing fluids towards any dominant source. Rather than that, volatile analyses in fluid inclusions suggest that this deposit formed as a pulsing hydrothermal system where each pulse or set of pulses accounts for different compositions of mineralizing fluids.The positive correlation between the relative content of magmatic fluids (high N₂/Ar ratios) and H₂S suggests that the necessary sulfur to carry mostly gold as bisulfide complexes came essentially from magmatic sources. Chlorine necessary to carry silver and base metals was found to be abundant in inclusion fluids and although there is no evidence about its source, it is plausible that it may come from magmatic sources as well.     

Exposure ages from relict lateral moraines overridden by the Fennoscandian ice sheet

Lateral moraines constructed along west to east sloping outlet glaciers from mountain centred, pre-last glacial maximum (LGM) ice fields of limited extent remain largely preserved in the northern Swedish landscape despite overriding by continental ice sheets, most recently during the last glacial. From field evidence, including geomorphological relationships and a detailed weathering profile including a buried soil, we have identified seven such lateral moraines that were overridden by the expansion and growth of the Fennoscandian ice sheet. Cosmogenic ¹⁰Be and ²⁶Al exposure ages of 19 boulders from the crests of these moraines, combined with the field evidence, are correlated to episodes of moraine stabilisation, Pleistocene surface weathering, and glacial overriding. The last deglaciation event dominates the exposure ages, with ¹⁰Be and ²⁶Al data derived from 15 moraine boulders indicating regional deglaciation 9600 ± 200 yr ago. This is the most robust numerical age for the final deglaciation of the Fennoscandian ice sheet. The older apparent exposure ages of the remaining boulders (14,600-26,400 yr) can be explained by cosmogenic nuclide inheritance from previous exposure of the moraine crests during the last glacial cycle. Their potential exposure history, based on local glacial chronologies, indicates that the current moraine morphologies formed at the latest during marine oxygen isotope stage 5. Although numerous deglaciation ages were obtained, this study demonstrates that numerical ages need to be treated with caution and assessed in light of the geomorphological evidence indicating moraines are not necessarily formed by the event that dominates the cosmogenic nuclide data.     

Some breakage characteristics of ultra-fine wet grinding with a centrifugal mill

A centrifugal mill is a high-power intensity media mill that can be used for ultra-fine grinding, employing centrifugal forces generated by gyration of the axis of the mill tube in a circle. The mill charge motion is quite different depending on the ratio of the gyration diameter to the mill diameter (G / D ratio), varying from a motion similar to that of a conventional tumbling media mill to that of a vibration mill. In this study, a centrifugal mill was constructed with an arrangement where the gyration diameter could be readily adjusted. The batch grinding characteristics of three different minerals (limestone, talc and illite) in water with dispersing agent were investigated at various G / D ratios. It was found that the optimum G / D ratio in terms of the specific energy consumption to give a desired fineness of product was different for the three minerals. This was due to their different reactions to the breakage mechanisms provided by the mill charge motion at varying G / D ratios. The size distributions became progressively narrower at increased grinding times, and particles finer than about 0.1 μm were not detected even for prolonged grinding times. Measurement of specific surface areas indicated that this was not due to an artifact of the size measurements by laser diffractometry. This implies that there is a limitation in which particles finer than 0.1 μm are not produced under the conditions tested in this type of mill, but further investigation is needed for experimental verification of this limit of comminution.     

Microfabrics of calcite ultramylonites as records of coaxial and non-coaxial deformation kinematics: Examples from the Rocher de l'Yret shear zone (Western Alps)

Microfabrics were analysed in calcite mylonites from the rim of the Pelvoux massif (Western Alps, France). WNW-directed emplacement of the internal Penninic units onto the Dauphinois domain produced intense deformation of an Eocene-age nummulitic limestone under lower anchizone metamorphic conditions (slightly below 300 °C). Two types of microfabrics developed primarily by dislocation creep accompanied by dynamic recrystallisation in the absence of twinning. Coaxial kinematics are inferred for samples exhibiting grain shape fabrics and textures with orthorhombic symmetry. Their texture (crystallographic preferred orientation, CPO) is characterised by two c-axis maxima, symmetrically oriented at 15° from the normal to the macroscopic foliation. Non-coaxial deformation is evident in samples with monoclinic shape fabrics and textures characterised by a single oblique c-axis maximum tilted with the sense of shear by about 15°. From the analysis of suitably oriented slip systems for the main texture components under given kinematics it is inferred that the orthorhombic textures, which developed in coaxial kinematics, favour activity of <10–11> and <02–21> slip along the f and r planes, respectively, with minor contributions of basal-<a> slip. In contrast, the monoclinic textures, which developed during simple shear, are most suited for duplex <a> slip along the basal plane. The transition between the dominating slip systems for the orthorhombic and monoclinic microfabrics is interpreted to be due to the effects of dynamic recrystallisation upon texture development. Since oblique c-axis maxima documented in the literature are most often rotated not with but against the shear sense, calcite textures alone should not be used as unequivocal shear sense indicators, but need to be complemented by microstructural criteria such as shape preferred orientations, grain size estimates and amount of twinning.     

On the role of heat flow, lithosphere thickness and lithosphere density on gravitational potential stresses

Gravitational potential stresses (GPSt) are known to play a first-order role in the state of stress of the Earth's lithosphere. Previous studies focussed mainly on crust elevation and structure and little attention has been paid to modelling GPSt using realistic lithospheric structures. The aim of the present contribution is to quantify gravitational potential energies and stresses associated with stable lithospheric domains. In order to model realistic lithosphere structures, a wide variety of data are considered: surface heat flow, chemical depletion of mantle lithosphere, crustal thickness and elevation. A numerical method is presented which involves classical steady-state heat equations to derive lithosphere thickness, geotherm and density distribution, but additionally requires the studied lithosphere to be isostatically compensated at its base. The impact of varying surface and crustal heat flow, topography, Moho depth and crust density on the signs and magnitudes of predicted GPSt is systematically explored. In clear contrast with what is assumed in most previous studies, modelling results show that the density structure of the mantle lithosphere has a significant impact on the value of the predicted GPSt, in particular in the case of thick lithospheres. Using independent information from the literature, the method was applied to get insights in the state of stress of continental domains with contrasting tectono-thermal ages. The modelling results suggest that in the absence of tectonic stresses Phanerozoic and Proterozoic lithospheres are spontaneously submitted to compression whereas Archean lithospheres are in a neutral to slightly tensile stress state. These findings are in general in good agreement with global stress measurements and observed geoid undulations.     

Estimation of runoff distribution within river systems: Application to the Lena Basin (Siberia)

A channel account approach is proposed to estimate longitudinal changes in runoff along large river systems. This new method provides a quantitative basis for describing the fluvial transport of suspended particulate material and dissolved substances. This method includes an evaluation of basic elements of water balance in separate sections of the river network and subsequent correction of channel accounting equations for the entire system using a maximum likelihood principle. To calculate water discharges of tributaries that have no hydrological information, structural analysis of river network is performed. This approach provides less error in comparison with traditional methods of estimating lateral inflow. The method is used to trace water discharge with increasing distance along the Lena river basin and to evaluate the contribution of geologically and lithologically uneven sub-basins in water discharge formation during a summer low water period.