发射光谱法测定区域化探样品中的Pb、Sn、Mo、V元素

采用发射光谱法测定区域化探样品中Pb、Sn、Mo、V元素,以焦硫酸钾、氟化钠、三氧化二铝和碳粉的混合物为固体缓冲剂,采用外加内标法以锗（Ge）作为内标元素,选择合适的分析线对,选取国家一级地球化学标准物质（GBW水系沉积物、土壤）平行测定（n=12次）.测试结果准确度达到规范要求,满足区域化探样品的检测要求.     

The source of sulfur in sulfide deposits in the Siberian Platform traps (from isotope data)

The source of sulfur in giant Norilsk-type sulfide deposits is discussed. A review of the state of the problem and a critical analysis of existing hypotheses are made. The distribution of δ³⁴S in sulfides of ore occurrences and small and large deposits and in normal sedimentary, metamorphogenic, and hypogene sulfates is considered. A large number of new δ³⁴S data for sulfides and sulfates in various deposits, volcanic and terrigenous rocks, coals, graphites, and metasomatites are presented. The main attention is focused on the objects of the Norilsk and Kureika ore districts. The δ³⁴S value varies from -14 to + 22.5‰ in sulfides of rocks and ores and from 15.3 to 33‰ in anhydrites. In sulfide-sulfate intergrowths and assemblages, δ³⁴S is within 4.2-14.6‰ in sulfides and within 15.3-21.3‰ in anhydrites. The most isotopically heavy sulfur was found in pyrrhotite veins in basalts (δ³⁴S = 21.6‰), in sulfate veins cutting dolomites (δ³⁴S = 33‰), and in subsidence caldera sulfates in basalts (δ³⁴S = 23.2-25.2‰). Sulfide ores of the Tsentral’naya Shilki intrusion have a heavy sulfur isotope composition (δ³⁴S = + 17.7‰ (n = 15)). Thermobarogeochemical studies of anhydrites have revealed inclusions of different types with homogenization temperatures ranging from 685 °C to 80 °C. Metamorphogenic and hypogene anhydrites are associated with a carbonaceous substance, and hypogene anhydrites have inclusions of chloride-containing salt melts. We assume that sulfur in the trap sulfide deposits was introduced with sulfates of sedimentary rocks (δ³⁴S = 22-24‰). No assimilation of sulfates by basaltic melt took place. The sedimentary anhydrites were “steamed” by hydrocarbons, which led to sulfate reduction and δ³⁴S fractionation. As a result, isotopically light sulfur accumulated in sulfides and hydrogen sulfide, isotopically heavy sulfur was removed by aqueous calcium sulfate solution, and “residual” metamorphogenic anhydrite acquired a lighter sulfur isotope composition as compared with the sedimentary one. The wide variations in δ³⁴S in sulfides and sulfates are due to changes in the physicochemical parameters of the ore-forming system (first of all, temperature and P_ch4) during the sulfate reduction. The regional hydrocarbon resources were sufficient for large-scale ore formation.     

Automated Extraction of a Five‐Year LA‐ICP‐MS Trace Element Data Set of Ten Common Glass and Carbonate Reference Materials: Long‐Term Data Quality,Optimisation and Laser Cell Homogeneity

LA‐ICP‐MS is increasingly applied to obtain quantitative multi‐element data with minimal sample preparation, usually achieved by calibration using reference materials (RMs). However, some ubiquitous RMs, for example the NIST SRM 61× series glasses, suffer from reported value uncertainties for certain elements. Moreover, no long‐term data set of analyses conducted over a range of ablation and tuning conditions exists. Thus, there has been little rigorous examination of the extent to which offsets between measured and reported values are the result of error in these values rather than analytically induced fractionation. We present new software (‘LA‐MINE’), capable of extracting LA‐ICP‐MS data with no user input, and apply this to our system, yielding over 5 years of data (~ 5700 analyses of ten glass and carbonate RMs). We examine the relative importance of systematic analytical bias and possible error in reported values through a mass‐specific breakdown of fourteen of the most commonly determined elements. Furthermore, these data, obtained under a wide range of different ablation conditions, enable specific recommendations of how data quality may be improved, for example the role of diatomic gas, the effect of differential inter‐glass fractionation factors and choice of transport tubing material. Finally, these data demonstrate that the two‐volume Laurin ablation cell is characterised by no discernible spatial heterogeneity in measured trace element ratios.     

Multi-factor sensitivity analysis on the stability of submarine hydrate-bearing slope

There are many factors affecting the instability of the submarine hydrate-bearing slope (SHBS), and the interaction with hydrate is very complicated. In this paper, the mechanical mechanism of the static liquefaction and instability of submarine slope caused by the dissociation of natural gas hydrate (NGH) resulting in the rapid increase of pore pressure of gas hydrate-bearing sediments (GHBS) and the decrease of effective stress are analyzed based on the time series and type of SHBS. Then, taking the typical submarine slope in the northern South China Sea as an example, four important factors affecting the stability of SHBS are selected, such as the degree of hydrate dissociation, the depth of hydrate burial, the thickness of hydrate, and the depth of seawater. According to the principle of orthogonal method, 25 orthogonal test schemes with 4 factors and 5 levels are designed and the safety factors of submarine slope stability of each scheme are calculated by using the strength reduction finite element method. By means of the orthogonal design range analysis and the variance analysis, sensitivity of influential factors on stability of SHBS are obtained. The results show that the degree of hydrate dissociation is the most sensitive, followed by hydrate burial depth, the thickness of hydrate and the depth of seawater. Finally, the concept of gas hydrate critical burial depth is put forward according to the influence law of gas hydrate burial depth, and the numerical simulation for specific submarine slope is carried out, which indicates the existence of critical burial depth.     

Os水吸收液ICP-MS测量信号强度衰减原因研究

蒸馏法能从样品中有效分离出OsO_4,吸收液直接用于ICP-MS测定,是辉钼矿Re-Os定年的关键技术环节。但实验发现,长时间放置的吸收液中Os信号强度显著降低。根据OsO_4化学性质推测原因在于一是挥发使吸收液Os含量减少,二是还原使+8价Os变成低价态,气态比例降低,若雾化效率不变,进入质谱仪的Os减少,两者都会导致信号降低,但具体影响情况不明,需深入研究。本文利用辉钼矿标准物质制备不同放置时间、酸度和温度的吸收液,对比上述条件对ICP-MS信号强度的影响。实验时将残余吸收液与稀释剂、氧化剂封入Carius管加热蒸馏,测定Os含量。结果表明:吸收液放置时间越长,酸度越低,温度越高,信号降幅越大,幅度达到3.2%~68.6%。室温下放置相同时间,低酸度吸收液的Os保存率高于高酸度吸收液,但Os信号强度低于后者,证明了挥发和还原共同导致信号衰减,且还原是主导原因。本文提出,冷冻(-18℃)可抑制OsO_4挥发,提高酸度(约3.5 mol/L)可减弱OsO_4还原,两者结合抑制信号衰减,提高了蒸馏法的灵活性和适用性。     

Hydrothermal Dolomite: A Review and PerspectiveEI北大核心CSCD

Hydrothermal dolomite commonly closely associates with oil-gas reservoirs and sediment-hosted Pb-Zn deposits, the Mississippi Valley-type (MVT) Pb-Zn deposits in particular. Host rocks of MVT deposits usually experienced extensive dolomitization, and indeed, hydrothermal dolomite is considered as a useful prospective indicator for MVT mineralization. However, genetic link between the hydrothermal dolomitization and MVT Pb-Zn mineralization is a matter of debate. This paper briefly reviewed the nomenclature and research history of hydrothermal dolomite, introduced the major geological, geochemical characteristics, and distribution of hydrothermal dolomite, spatial and possibly genetic relationship between hdyrothermal dolomite and hdyrothermal ore deposits and oil-gas reservoirs based on case studies including the occurrence of hydrothermal dolomites in MVT deposits in Southwest China. The temporal and genetic relationships between dolomitizaiton and thermal sulfate reduction, sulfide precipitation and thus the location of ore mineralization well worthy more attention, and comprehensive geological and isotope geochemical and state of art in situ techniques will contribute to understanding of the genesis of hydrotherml dolomite and the spatially related ore deposits and oil-gas reservoirs. © 2018, Science Press. All right reserved.     

微波等离子体原子发射光谱法测定偏远矿区海泡石中的主微量元素

海泡石是具有层状结构的含水富镁硅酸盐黏土矿物,其中无机元素含量是揭示其成矿物质来源、成矿流体性质和矿床成因的重要依据,通常采用电感耦合等离子体发射光谱/质谱法(ICP-OES/MS)进行测定,等离子体(ICP)的高温激发会产生成大量谱线干扰,维持ICP稳定工作需使用高纯氩气,持续供气对于偏远矿区海泡石的检测还将面对气体采购和运输不便的问题。本文基于微波等离子体原子发射光谱(MP-AES)的低温激发技术减少光谱干扰,建立了准确测定偏远矿区海泡石中主量元素Mg、Al、Ca、Fe、K、Na和微量元素Cu、Zn、Mn、Pb含量的分析方法。利用硝酸-盐酸-氢氟酸混合酸对海泡石进行微波消解,避免了样品处理过程中分析元素的损失,加快了样品处理速度,同时提高了样品溶液的稳定性。通过选择各元素光谱线的分析波长,并利用快速线性干扰校正(FLIC)技术校正光谱干扰,以Lu为内标元素校正基体效应,提高了灵敏度和准确度。各元素的检出限为0.19～14.6μg/L。海泡石国家标准物质(GBW07138)各元素测定值与认定值的相对误差在-5.0%～6.7%之间。本方法具有检出限低、线性范围宽、结果准确等优点;MP-AES采用自带的氮气发生器为等离子体提供氮气作为工作气,无需引入复杂气体,提高了分析效率,尤其适用于气体采购和运输不便的偏远矿区。     

双碳背景下我国煤炭资源勘查开发布局研究

随着双碳背景下国家能源结构调整和生态文明建设的要求,本文从保障国家主体能源安全和优化煤炭资源勘查开发布局的角度考虑,阐述了中国煤炭资源分布特点及勘查开发现状;从坚持集约与协调发展、改革与创新发展、绿色与清洁发展的基本原则出发,分析了新时期煤炭资源勘查目标：加强大型煤炭基地资源勘查、推进新增煤层气资源储量、加快煤系矿产资源勘查;从资源禀赋、开发强度、市场区位、环境容量、输送通道等方面出发,阐述了14个大型煤炭基地开发布局方向及建设规模,同时要加快煤层气的开发利用。研究成果对未来一段时期煤炭资源勘查开发及煤炭工业高质量发展具有重要的指导意义。     

岩石蠕变声发射特性研究现状与展望

蠕变是岩石一种重要的力学特性,与工程的长期安全稳定和安全密切相关。声发射技术作为一种无损检测手段,被广泛应用于岩石变形破坏研究领域。本文阐述了近年来基于声发射技术开展岩石蠕变特性方面的研究进展,主要包括不同岩性、加载方式、应力水平下岩石蠕变声发射特性,岩石蠕变破坏声发射前兆特征。在此基础上,提出了几点今后需要进一步深入研究的问题。     

陆地生态系统碳汇在实现“双碳”目标中的作用和建议

2030年前实现碳达峰、2060年前实现碳中和(简称“双碳”)是我国对国际社会的庄严承诺,已被纳入生态文明建设的总体布局。生态系统碳汇是实现“双碳”目标的重要手段,也是林业和草原实现高质量发展的必然要求。国际有关机构对全球森林、草地和湿地生态系统的碳储量和碳循环进行了评估。自1990年以来,附件一国家(指《联合国气候变化框架公约》附件一列出的经济合作发展组织中所有发达国家和经济转型国家)对本国的碳排放和碳汇进行估算,编制了年度温室气体清单; 我国也编制了5次国家温室气体清单。这些工作对我国开展应对气候变化的研究提供了基础。提出了如下建议: 在编制“双碳” 路线图和时间表时,既要考虑我国生态系统碳汇与能源和工业领域碳排放在区域空间分布和时间维度上的差异性,也要考虑生态系统同时所具有的碳汇和碳排放的特殊性; 生态系统碳汇是碳达峰的非选项,是碳中和的必选项; 生态系统碳汇要遵循国家实现“双碳”目标的基本原则,要将生态系统碳汇作为国家生态建设和保护工程的主要目标,提高碳汇计量和监测能力,完善市场和融资机制。