基于浮标数据的卫星雷达高度计海浪波高数据评价与校正

卫星雷达高度计是海浪有效波高（significant wave height,SWH）观测的重要手段之一,本文利用时空匹配方法对T/P、Jason-1、Envisat、Jason-2、Cryosat-2和HY-2A共6颗卫星雷达高度计SWH数据与NDBC（National Data Buoy Center,NDBC）浮标SWH数据进行对比验证,并对雷达高度计SWH数据进行校正。全部卫星雷达高度计SWH数据时间跨度为1992年9月25日到2015年9月1日,对比验证NDBC浮标共53个,包括7个大洋浮标。精度评价发现除T/P外,各卫星雷达高度计SWH的RMSE都在0.4~0.5 m之间,经过校正后,RMSE都有显著下降,下降程度最大为13.82%;对于大洋浮标,评价结果RMSE在0.20~0.28 m之间,结果明显优于全部NDBC浮标的精度评价结果;HY-2A卫星雷达高度计SWH在经过校正后数据质量与国外其他5颗卫星雷达高度计SWH数据质量差异较小。     

Development of a new method for efficiently calculating of evaporation from the phreatic aquifer in variably saturated flow modeling

In this paper, we proposed a new method that has been developed based on the surface soil moisture content (SSMC) to more efficiently calculate the groundwater evaporation in variably saturated flow modeling. In this method, the empirical formula to calculate evaporation was modified and the value of the formula varies from zero to one as a closed interval. In addition, the simulation code for calculating the groundwater evaporation based on the SSMC method was incorporated into the EOS9 module of Tough2, a variably saturated flow modeling code. Finally, two numerical tests and a case simulation were conducted to verify the feasibility and accuracy of the SSMC method. Simulation results indicate that the SSMC method is capable of appropriately simulating the characteristics of water flow in vadose zone and the amount of evaporation with the variable water table. And such results are in coincidence with the value calculated by the logistic function method, and fit well with the measured data globally rather than locally.     

“中科2号”海湾扇贝(Argopecten irradians)幼虫期壳长遗传力的估计

基于全同胞组内相关法估计"中科2号"海湾扇贝(Argopecten irradians)幼虫期壳长的遗传力。通过平衡巢式交配实验设计构建了7个半同胞和21个全同胞"中科2号"海湾扇贝家系。在家系幼虫期的第1天和第6天分别测定每个全同胞家系的30个幼虫个体的壳长。利用SAS 9.0软件的一般线性模型(GLM)计算表型变量的原因方差组分,估算壳长遗传力。分析结果显示,"中科2号"海湾扇贝幼虫1日龄和6日龄壳长的遗传力分别为0.51和0.58。t检验显示两个日龄壳长遗传力的估计值均不显著(P0.05),且6日龄雌性遗传方差组分大于雄性遗传方差组分,说明雌性遗传方差组分随日龄增长可能存在较大母性效应。较大的加性遗传方差表明选择育种对于"中科2号"海湾扇贝的早期生长尚具有较大的改良潜力。     

High Precision Sr‐Nd‐Hf‐Pb Isotopic Compositions of USGS Reference Material BCR‐2

The Lamont‐Doherty Earth Observatory radiogenic isotope group has been systematically measuring Sr‐Nd‐Pb‐Hf isotopes of USGS reference material BCR‐2 (Columbia River Basalt 2), as a chemical processing and instrumental quality control monitor for isotopic measurements. BCR‐2 is now a widely used geochemical inter‐laboratory reference material (RM), with its predecessor BCR‐1 no longer available. Recognising that precise and accurate data on RMs is important for ensuring analytical quality and for comparing data between different laboratories, we present a compilation of multiple digestions and analyses made on BCR‐2 during the first author's dissertation research. The best estimates of Sr, Nd and Hf isotope ratios and measurement reproducibilities, after filtering at the 2s level for outliers, were ⁸⁷Sr/⁸⁶Sr = 0.705000 ± 11 (2s, 16 ppm, n = 21, sixteen digestions, one outlier), ¹⁴³Nd/¹⁴⁴Nd = 0.512637 ± 13 (2s, 25 ppm, n = 27, thirteen digestions, one outlier) and ¹⁷⁶Hf/¹⁷⁷Hf = 0.282866 ± 11 (2s, 39 ppm, n = 25, thirteen digestions, no outliers). Mean Nd and Hf values were within error of those reported by Weis et al. (2006, 2007) in their studies of RMs; mean Sr values were just outside the 2s uncertainty range of both laboratories. Moreover, a survey of published Sr‐Nd‐Hf data shows that our results fall within the range of reported values, but with a smaller variability. Our Pb isotope results on acid leached BCR‐2 aliquots (n = 26, twelve digestions, two outliers) were ²⁰⁶Pb/²⁰⁴Pb = 18.8029 ± 10 (2s, 55 ppm), ²⁰⁷Pb/²⁰⁴Pb = 15.6239 ± 8 (2s, 52 ppm), ²⁰⁸Pb/²⁰⁴Pb = 38.8287 ± 25 (2s, 63 ppm). We confirm that unleached BCR‐2 powder is contaminated with Pb, and that sufficient leaching prior to digestion is required to achieve accurate values for the uncontaminated Pb isotopic compositions.     

锂光卤石X-ray衍射标准图谱

盐湖卤水提锂过程中需了解与掌握锂元素结晶析出与赋存状态,锂光卤石(LiCl·MgCl_2·7H_2O)作为重要的中间产物,其结构与种类均需鉴别,但由于缺乏锂光卤石的X-ray衍射标准图谱,使得常见的Xray衍射方法无法应用。利用相图原理,通过湿固相法制备高纯锂光卤石,然后对其进行X-ray衍射分析,从而提供锂光卤石X-ray衍射的标准图谱,为高镁锂比盐湖卤水提锂过程分析提供可靠的理论支撑。     

基于LabView的松科2井项目管理系统

松科二井2013年正式启动,2018年5月完井,历时6年,最终井深7018 m。项目执行过程中,形成合同700多个、文件200多个、汇款流水1000多笔、报账流水1600多笔。针对松科二井合同、文件繁多,财务流程繁杂,涉及项目多的特点,基于LabVIEW平台设计了一套项目管理系统。该系统可全程记录松科二井上述合同、文件、汇款和报账信息,建立合同及对应批次汇款和报销的勾稽关系,具有模糊查询、修改、超链接等功能。     

RS & GIS-based landslide susceptibility mapping of the Balason River basin,Darjeeling Himalaya,using logistic regression (LR) model

The present study deals with the preparation of a landslide susceptibility map of the Balason River basin, Darjeeling Himalaya, using a logistic regression model based on Geographic Information System and Remote Sensing. The landslide inventory map was prepared with a total of 295 landslide locations extracted from various satellite images and intensive field survey. Topographical maps, satellite images, geological, geomorphological, soil, rainfall and seismic data were collected, processed and constructed into a spatial database in a GIS environment. The chosen landslide-conditioning factors were altitude, slope aspect, slope angle, slope curvature, geology, geomorphology, soil, land use/land cover, normalised differential vegetation index, drainage density, lineament number density, distance from lineament, distance to drainage, stream power index, topographic wetted index, rainfall and peak ground acceleration. The produced landslide susceptibility map satisfied the decision rules and ?2 Log likelihood, Cox &; Snell R-Square and Nagelkerke R-Square values proved that all the independent variables were statistically significant. The receiver operating characteristic curve showed that the prediction accuracy of the landslide probability map was 96.10%. The proposed LR method can be used in other hazard/disaster studies and decision-making.     

基于GF-2影像西藏桑耶地区岩性-构造遥感解译

西藏桑耶地区位于青藏高原中南部,区内切割强烈,地势陡峻,属于高山峡谷区。为提高区域地质调查野外工作效率,在调查中率先开展了遥感解译研究。在充分收集已有资料的基础上,通过对GF-2卫星数据进行预处理和影像增强,结合野外验证建立了各地质要素的遥感解译标志,实现了区内不同地层岩性、侵入岩、断裂和褶皱等地质要素的提取,最终编制了研究区1:5万遥感地质解译图,为区域地质调查提供了数据支撑。结果表明: 各地质要素在GF-2数据上均有良好反映,完全满足1:5万尺度的遥感地质解译和编图的需要,充分显示出该卫星数据在区域地质调查等工作中具有良好的应用前景。     

Main technical innovations of Songke Well No.2 Drilling Project

Songke Well No.2, one of the main part of the scientific drilling project in Songliao Basin, which was drilled 7018 m and acquired the part of cores continuously from the Low Cretaceous to the Carboniferous and the Permian from the 2843 m deep, can be considered as the deepest continental drilling project in Asia. Aiming at the features of longer well sections, larger diameters and multiple spud-ins for coring of Songke Well No.2, this project broke through the “coring in small diameter and reaming in large diameter” spud-in drilling-completion procedures which are always used in large-diameter-well coring for continental scientific drilling projects in domestic and overseas and the drilling method of short-single-cylinder roundtrip footage. At the same time, “coring in the same diameter and completing drilling at one single diameter” was achieved at all φ311 mm and φ216 mm coring sections of more than one thousand meters long, high-efficient operation with “drilling long footage with drill tools combined in multi-cylinders” was achieved at deep coring section. Four world drilling records were created which include more than a thousand meters continuous coring at φ311 mm, and the footage per roundtrip footage at φ311 mm, φ216 mm and φ152 mm is all more than 30 m, all of these breakthroughs reduced at least 300 days for this project; moreover, considering the characteristics of formations that the geothermal gradient is high in the drilled sections and the inside-well temperature is over 240°C after drilling completion, a formate-polymer water-based mud system was developed by compounding attapulgite and sodium bentonite and by adding independently developed high-temperature stabilizer, which can provide critical technical support for successful well completion at 7018 m in the super-high-temperature environment It is the first time that the water-based mud is operated at the working temperature higher than 240°C in China; Besides, considering the high-quality requirement on cores imposed by the project, the method “mechanical cored is charge” to discharge core nondestructively on the ground was worked out, and more than 4000 m scatheless cores were discharged out of the drill pipes while maintaining original stratum structures.     

Using climate to relate water discharge and area in modern and ancient catchments

Models relating sediment supply to catchment properties are important in order to use the geological record to deduce landscape evolution and interplay between tectonics and climate. Water discharge (Q _w) is an important factor in the widely used ‘BQART ’ model, which relates sediment load to a set of measurable catchment parameters. Although many of the factors in this equation may be independently estimated with some degree of certainty in ancient systems, water discharge (Q _w) certainly cannot. An analysis of a world database of modern catchments with 1255 entries shows that the commonly applied equation relating catchment area (A ) to water discharge (Q _w = 0·075A^0·8) does not predict water discharge from catchment area well in many cases (R ² = 0·5 and an error spanning about three orders of magnitude). This is because the method does not incorporate the effect of arid and wet climate on river water discharge. The inclusion of climate data into such estimations is an opportunity to refine these estimates, because generalized estimates of palaeoclimate can often be deduced on the basis of sedimentological data such as palaeosol types, mineralogy and palaeohydraulics. This paper investigates how the relationship between catchment area and river discharge varies with four runoff categories (arid, semi‐arid, humid and wet), which are recognizable in the geological record, and modifies the coefficient and exponent of the above‐mentioned equation according to these classes. This modified model yields improved results in relating discharge to catchment area (R ² = 0·95 and error spanning one order of magnitude) when core, outcrop or regional palaeoclimate reconstruction data are available in non‐arid systems. Arid systems have an inherently variable water discharge, and catchment area is less important as a control due to downstream losses. The model here is sufficient for many geological applications and makes it possible to include variations in catchment humidity in mass‐flux estimates in ancient settings.