Post-emplacement tilting of lava flows inferred from magnetic fabric study: the example of Oligocene lavas in the Jeanne d’Arc Peninsula (Kerguelen Islands)

Statistical analysis of the magnetic fabric of samples from several successive lava flows emplaced under similar conditions can allow determination of the mean flow direction when magnetic fabric data from individual flows do not lead to reliable results. A difference between the obtained flow direction and the present dip direction indicates that the flows were tilted after emplacement. For 2 successive series of flows on the Jeanne d’Arc Peninsula presently NNW dipping, this method shows lava emplacement along a SSW–NNE direction. This indicates a gentle tilting acquired during a period of weak deformation in the whole archipelago. Additionally, the magnetic fabric data allow the reconstruction of the different conditions of emplacement of these two series of lava flows and of formation of the local thick conglomerate interbedded between these series.     

A simple test and predictive models for assessing swell potential of Ankara (Turkey) Clay

During the past three decades, damage due to swelling action of Ankara Clay has been observed more clearly in some parts of Ankara where rapid expansion of the city led to the construction of various kinds of structures. In this study, a comprehensive research program has been conducted (i) to investigate the effect of remoulding and desiccation on the swelling behavior of Ankara Clay and its swelling anisotropy, (ii) to estimate depth of active zone, (iii) to develop a simple technique in determining the magnitude of swelling based on water content of the soaked specimen after 24 and 72 h (w_max24,72), and (iv) to produce predictive models which could be used to estimate the swelling potential of Ankara Clay from its mineralogical and simply measured engineering characteristics. A laboratory testing program was carried out using both undisturbed, and remoulded and desiccated samples selected from 20 different locations. Montmorillonite was identified as being the main clay mineral present. Based on the moisture content variation with depth, the active expansive zone was considered to be about 2 m. The test results suggest that swelling pressure of the clay considerably decreases and/or dies out when the water content is greater than 30%. It is also noted that the measured lateral swelling is significantly in excess of the vertical equivalent indicating an anisotropy with respect to swelling. Statistical assessments indicate that a new parameter (w_max24,72) from a simple test, suggested in this study, is a very strong parameter for predicting swelling parameters of Ankara Clay. Based on 60 empirical predictive equations with coefficients of correlation between 0.96 and 0.66 from multiple regression analyses, w_max24,72, methylene blue value, liquid limit, dry unit weight and smectite content are the most important index and mineralogical properties to predict the swelling parameters of Ankara clay with small deviations from the measured values.     

The anisotropy of magnetic susceptibility in biotite, muscovite and chlorite single crystals

The anisotropy of magnetic susceptibility (AMS) of single crystals of biotite, muscovite and chlorite has been measured in order to provide accurate values of the magnetic anisotropy properties for these common rock-forming minerals. The low-field AMS and the high-field paramagnetic susceptibility are defined. For the high-field values, it is necessary to combine the paramagnetic deviatoric tensor obtained from the high-field torque magnetometer with the paramagnetic bulk susceptibility measured from magnetization curves of the crystals. This leads to the full paramagnetic susceptibility ellipsoid due to the anisotropic distribution of iron cations in the silicate lattice. The ellipsoid of paramagnetic susceptibility, which was obtained for the three phyllosilicates, is highly oblate in shape and the minimum susceptibility direction is subparallel to the crystallographic c-axes. The anisotropy of the susceptibility within the basal plane of the biotite has been evaluated and found to be isotropic within the accuracy of the instrumental measurements. The degree of anisotropy of biotite and chlorite is compatible with previously reported values while for muscovite the smaller than previously published values. The shape of the chlorite AMS ellipsoid for all the samples is near-perfect oblate in contrast with a wide distribution of oblate and prolate values reported in earlier studies. Reliable values are important for deriving models of the magnetic anisotropy where it reflects mineral fabrics and deformation of rocks.     

岩矿石电磁频散规律及其在电磁波法勘探中的影响和校正

本文以大量的实测资料为依据,总结了岩矿石电磁频散的规律性。结合电磁波勘探方法中的实际问题,讨论了频散对相位常数α和吸收系数β所产生的影响及误差。提出了在实际工作中对频散进行校正的必要性,并且给出了校正公式。     

Crust-Mantle Electrical Structure in the Area along the Yadong-Burn Co Profile

1.IntroductionUntilnowTibetisstillthearchetypalregionwithcontinentalcollisiongoingoninit,henceitisanidealnaturallaboratoryforstudyingthegeologicevolutionofintracontinentalorogenicbeltandthecrust-mantledeepprocesses,aswellastheinteractionbetweenthemandthesupracrustalmovements.Forthisreason,forseveraldecadesgeologistsandgeophysicistsfromvariouscountrieshavemadeunremittingeffortsinthisregiontoprobeintotheoriginandprocessoftheplateauformation,withavarietyofcognitionsproposed.TheCMPresultsoftheSi…     

The phytoplankton of some saline lakes in Central Asia

The Aral Sea, Lake Balkhash, and Lake Kamyslybas are closed lakes in Central Asia. They range from oligosaline to metasaline. The salinity of the Aral Sea has increased by more than 30 g L⁻¹ since widespread irrigation began in its catchment area. Few studies of the phytoplankton have been conducted on these lakes since extensive irrigation started. The investigation reported here compares the flora of phytoplankton in these saline lakes. In the Small Aral Sea, phytoplankton density gradually decreased with increasing electrical conductivity (EC) (∼ salinity), but there was no such relation in Lake Balkhash and Lake Kamyslybas. In the Aral Sea, Dinophyceae and Bacillariophyceae were frequently observed in most areas of high EC value, and Cyanophyceae were most conspicuous in the area of medium and lower EC values. In Lake Balkhash, Cyanophyceae were most conspicuous, but Chlorophyceae were also noticeable. Most Cyanophyceae in Aral Sea formed filaments with heterocysts. The distinct characteristic of the phytoplankton of the Lake Balkhash was that all dominant species form colonies covered with a gelatinous film. Siliceousplankton diversity gradually decreased with increasing EC values in the Aral Sea and Lake Balkhash.     

Magnetic anisotropy produced by magma flow: theoretical model and experimental data from Ferrar dolerite sills (Antarctica)

Volcanic rocks forming sills, dykes or lava flows may display a magnetic anisotropy derived from the viscous flow during their emplacement. We model a sill as a steady-state flow of a Bingham fluid, driven by a pressure gradient in a horizontal conduit. The magma velocity as a function of depth is calculated from the motion and constitutive equations. Vorticity and strain rate are determined for a reference system moving with the fluid. The angular velocity and the orientation of an ellipsoidal magnetic grain immersed in the fluid are calculated as functions of time or strain. Magnetic susceptibility is then calculated for a large number of grains with a uniform distribution of initial orientations. It is shown that the magnetic lineation oscillates in the vertical plane through the magma flow direction, and that the magnetic foliation plane changes periodically from horizontal to vertical. The results are compared with the magnetic fabric of Ferrar dolerite sills (Victoria Land, East Antarctica) derived from low-field susceptibility measurements.     

Shear-wave anisotropy: spatial and temporal variations in time delays at Parkfield, Central California

Shear-wave splitting is analysed on data recorded by the High Resolution Seismic Network (HRSN) at Parkfield on the San Andreas fault, Central California, during the three-year period 1988-1990. Shear-wave polarizations either side of the fault are generally aligned in directions consistent with the regional horizontal maximum compressive stress, at some 70° to the fault strike, whereas at station MM in the immediate fault zone, shear-wave polarizations are aligned approximately parallel to the fault. Normalized time delays at this station are found to be about twice as large as those in the rock mass either side. This suggests that fluid-filled cracks and fractures within the fault zone are elastically or seismically different from those in the surrounding rocks, and that the alignment of fault-parallel shear-wave polarizations are associated with some fault-specific phenomenon.
Temporal variations in time delays between the two split shear-waves before and after a M_L = 4 earthquake can be identified at two stations with sufficient data: MM within the fault zone and VC outside the immediate fault zone. Time delays between faster and slower split shear waves increase before the M_L = 4 earthquake and decrease near the time of the event. The temporal variations are statistically significant at 68 per cent confidence levels. Earthquake doublets and multiplets also show similar temporal variations, consistent with those predicted by anisotropic poroelasticity theory for stress modifications to the microcrack geometry pervading the rock mass. This study is broadly consistent with the behaviour observed before three other earthquakes, suggesting that the build-up of stress before earthquakes may be monitored and interpreted by the analysis of shear-wave splitting.     

P-SH conversions in a flat-layered medium with anisotropy of arbitrary orientation

P-SH conversion is commonly observed in teleseismic P waves, and is often attributed to dipping interfaces beneath the receiver. Our modelling suggests an alternative explanation in terms of flat-layered anisotropy. We use reflectivity techniques to compute three-component synthetic seismograms in a 1-D anisotropic layered medium. For each layer of the medium, we prescribe values of seismic velocities and hexagonally symmetric anisotropy about a common symmetry axis of arbitrary orientation. A compressional wave in an anisotropic velocity structure suffers conversion to both SV -and SH -polarized shear waves, unless the axis of symmetry is everywhere vertical or the wave travels parallel to all symmetry axes. The P-SV conversion forms the basis of the widely used 'receiver function' technique. The P-SH conversion occurs at interfaces where one or both layers are anisotropic. A tilted axis of symmetry and a dipping interface in isotropic media produce similar amplitudes of both direct ( P ) and converted ( Ps ) phases, leaving the backazimuth variation of the P-Ps delay as the main discriminant. Seismic anisotropy with a tilted symmetry axis leads to complex synthetic seismograms in velocity models composed of just a few flat homogeneous layers. It is possible therefore to model observations of P coda with prominent transverse components with relatively simple 1-D velocity structures. Successful retrieval of salient model characteristics appears possible using multiple realizations of a genetic-algorithm (GA) inversion of P coda from several backazimuths. Using GA inversion, we determine that six P coda recorded at station ARU in central Russia are consistent with models that possess strong (> 10 per cent) anisotropy in the top 5 km and between 30 and 43 km depth. The symmetry axes are tilted, and appear aligned with the seismic anisotropy orientation in the mantle under ARU suggested by SKS splitting.