高密度电法勘察岩土工程实例

利用岩土层间的导电性差异特性，使用由WDJD-1型主机与WDZJ-1多路电极转换器组成的高密度电法测量系统，按照不同的工程要求，采取不同的排列方式进行勘探，并用RES2DINV(演示版)高密度电阻率数据二维反演软件对所采集的数据处理解释，可实现对不同岩土层界面的划分。与常规电法相比，其方法手段更为先进，定性定量解释可靠，影像图件直观清晰。     

Seismic structural control using an electric servomotor active mass driver system

This study investigates an electric‐type active mass driver (AMD) system for structural vibration control. Composed primarily of an electric servomotor and a ball screw, the electrical AMD system is free from noise problems, oil leakage, and labor‐intensive maintenance that commonly are associated with hydraulic AMD systems. The desired stroke amplification of the mass and the power demand of the servomotor can be adjusted via the ball screw pitch, which in turn affects the effectiveness and efficiency of the system. Meanwhile, an instantaneous optimal direct output feedback control algorithm is adopted. Numerical simulation is performed using a five‐story steel frame as the object structure under the conditions of the 1940 El Centro earthquake. The AMD system proves to be effective and efficient within a certain range of the ball screw pitch. The reductions of the peak responses can reach as high as 70% if properly designed. Requiring only the velocity measurement of the top floor for on‐line feedback control, the proposed control algorithm is recommended for practical implementation. Copyright © 2004 John Wiley & Sons, Ltd.     

基于电场理论的主动防雷系统的初步设想

针对目前使用的传统雷电防护技术存在的问题，通过分析雷电原理和雷电触发机制，利用电场理论来设计一套主动防雷系统，即实现保护对象所在空间大气处于被激放电状态，并利用闪电将大气激活为自激放电状态。介绍了主动防雷系统的原理，并对其核心的“引而不发”理论进行阐述，在此基础上设计出主动防雷系统的模型。具体说明了构成主动防雷系统的阻塞系统、疏导系统和电源系统的构造和特征以及它们之间的关系。计算得到主动防雷系统所需的电场强度E=0．69kV／m。最后指出了存在问题与发展方向，在结论中总结了主动防雷系统的特点及其关键。     

高密度电法中的"异常扩展效应"及归位计算方法

对高密度电法勘探的异常扩展效应问题进行了较深人的分析；提出了利用相关分析进行归位计算的方法。通过对球体及板状体的Pole-Pole、Wanner-alpha装置的异常归位计算，表明该方法对复杂异常的解释具有效果。     

我国主要金矿类型中黄铁矿"电子-空穴心"特征及影响因素

通过对我国主要金矿类型中黄铁矿导电类型的分析表明，黄铁矿“电子。空穴心”与金矿床的成因类型具有密切的联系，华北地台太古代变基性火山岩中的金矿床(绿岩带型)、热水淋滤型(卡林型)金矿床，黄铁矿多为单一的“电子心”型导电。大多数产于中生代岩体中的中深脉状金矿、火山次火山岩中的金矿床，黄铁矿为“电子心”、“空穴心”混合型导电，个别的为单一的“空穴心”导电。黄铁矿的“电子．空穴心”受杂质成分As、Co、Nl在成矿背景中的丰度，进入黄铁矿品格中的替代能力的差异、补偿类质同象现象、成矿时温度以及．f(S2)等多种因素的耦合制约。     

Signatures in flowing fluid electric conductivity logs

Flowing fluid electric conductivity logging provides a means to determine hydrologic properties of fractures, fracture zones, or other permeable layers intersecting a borehole in saturated rock. The method involves analyzing the time-evolution of fluid electric conductivity (FEC) logs obtained while the well is being pumped and yields information on the location, hydraulic transmissivity, and salinity of permeable layers. The original analysis method was restricted to the case in which flows from the permeable layers or fractures were directed into the borehole (inflow). Recently, the method was adapted to permit treatment of both inflow and outflow, including analysis of natural regional flow in the permeable layer. A numerical model simulates flow and transport in the wellbore during flowing FEC logging, and fracture properties are determined by optimizing the match between simulation results and observed FEC logs. This can be a laborious trial-and-error procedure, especially when both inflow and outflow points are present. Improved analyses methods are needed. One possible tactic would be to develop an automated inverse method, but this paper takes a more elementary approach and focuses on identifying the signatures that various inflow and outflow features create in flowing FEC logs. The physical insight obtained provides a basis for more efficient analysis of these logs, both for the present trial and error approach and for a potential future automated inverse approach. Inflow points produce distinctive signatures in the FEC logs themselves, enabling the determination of location, inflow rate, and ion concentration. Identifying outflow locations and flow rates typically requires a more complicated integral method, which is also presented in this paper.     

宁东煤田枣泉矿井综合物探效果

为探明宁东煤田枣泉矿井首采区煤层自然范围及充水性，根据采区内地球物理物征，采用高精度磁法，直流电测深法和激发极化法进行综合勘探。在磁法勘探中结合测区曲线特征，建立数据体模型，正演计算烧变岩边界；电法勘探利用烧变岩含水后电阻率降低的特征确定其含水范围及富水性。     

地面三维激光扫描仪测量误差检定

在利用三维激光扫描仪进行测量工作前,我们首先应了解其实际测量精度是否符合标称精度,而可靠的评价方式对得到精确的数据结果至关重要。本文利用北京卓立汉光TSA50-C型电动位移台作为评价标准,通过其精确的位移功能,准确地评价了RIGEL VZ-400三维激光扫描仪在测量单点位移时的误差,从而得到了其最佳工作距离。     

北京和广州地区云闪初始击穿电场变化特征

对比分析了北京和广州地区各100例云闪初始阶段前30 ms快电场变化波形上初始击穿脉冲的特征。依据脉冲的结构特征,两地区的云闪初始击穿脉冲可分为单极性单峰型、单极性多峰型、双极性单峰型和双极性多峰型脉冲,两地区均以单极性和单峰型脉冲为主。对脉冲参量特征的统计发现,脉冲的10%-90%上升时间、半峰值宽度地区差异性小于脉冲类型差异性;双极性单峰型脉冲的半峰值宽是单极性单峰型的1.2倍。不同类型脉冲过零时间的中值、平均值在10μs左右量级,且广州地区较北京地区的大;云闪初始击穿脉冲宽度平均值显著小于相同地区正地闪的,而脉冲间隔显著大于正地闪的。初始击穿脉冲最为集中的出现在云闪最初的1~2 ms,其比例随时间以显著的负指数分布下降。研究发现,双极性脉冲的过零时间与脉冲宽度之间、起始半周期峰值幅度与过冲幅度之间均存在较好的线性关系。     

定向钻进敷设电缆保护管轨迹优化设计研究

在老旧城区内采用定向钻进敷设地下管线,常常需要从已有的各类地下建（构）筑物或管线下方穿过,方案设计时就应考虑新建管道与之安全距离的取值问题。以厦门市某110 kV电力电缆的定向钻进工程的实际需求为出发点,在对国内现有规程规范及工程实例调查的基础上,对电力电缆保护管定向钻进敷设安全距离取值的影响因素进行分析,优化工程定向钻进敷设方案,指导该工程的建设,并为类似工程建设提供参考。