滇池流域非点源污染研究进展

非点源污染是滇池污染治理与控制的重点和难点,自20世纪80年代以来已有大量的研究。这些研究主要涉及了污染物来源及污染负荷估算、不同土地利用方式的污染物流失规律、污染控制方法及治理措施研究等内容、采用了实地考察、调查与监测、试验及模型模拟、3S及计算机技术等研究方法与研究手段。今后,还应在非农业生产所致的非点源污染、完整的监测系统及集成化非点源污染模型建立、水污染总量控制管理以及政策引导、环境保护的监管与实施等方面加强研究工作。     

Eco-environment range in the source regions of the Yangtze and Yellow rivers

Based on geographical and hydrological extents delimited, four principles are identified, as the bases for delineating the ranges of the source regions of the Yangtze and Yellow rivers in the paper. According to the comprehensive analysis of topographical characteristics, climate conditions, vegetation distribution and hydrological features, the source region ranges for eco-environmental study are defined. The eastern boundary point is Dari hydrological station in the upper reach of the Yellow River. The watershed above Dari hydrological station is the source region of the Yellow River which drains an area of 4.49×104 km2. Natural environment is characterized by the major topographical types of plateau lakes and marshland, gentle landforms, alpine cold semi-arid climate, and steppe and meadow vegetation in the source region of the Yellow River. The eastern boundary point is the convergent site of the Nieqiaqu and the Tongtian River in the upstream of the Yangtze River. The watershed above the convergent site is the source region of the Yangtze River, with a watershed area of 12.24×104 km2. Hills and alpine plain topography, gentle terrain, alpine cold arid and semi-arid climate, and alpine cold grassland and meadow are natural conditions in the source region of the Yangtze River.     

Source investigation of a small event using empirical Green's functions and simulated annealing

We propose a two-step inversion of three-component seismograms that (1) recovers the far-field source time function at each station and (2) estimates the distribution of co-seismic slip on the fault plane for small earthquakes (magnitude 3 to 4). The empirical Green's function (EGF) method consists of finding a small earthquake located near the one we wish to study and then performing a deconvolution to remove the path, site, and instrumental effects from the main-event signal.
The deconvolution between the two earthquakes is an unstable procedure: we have therefore developed a simulated annealing technique to recover a stable and positive source time function (STF) in the time domain at each station with an estimation of uncertainties. Given a good azimuthal coverage, we can obtain information on the directivity effect as well as on the rupture process. We propose an inversion method by simulated annealing using the STF to recover the distribution of slip on the fault plane with a constant rupture-velocity model. This method permits estimation of physical quantities on the fault plane, as well as possible identification of the real fault plane.
We apply this two-step procedure for an event of magnitude 3 recorded in the Gulf of Corinth in August 1991. A nearby event of magnitude 2 provides us with empirical Green's functions for each station. We estimate an active fault area of 0.02 to 0.15 km² and deduce a stress-drop value of 1 to 30 bar and an average slip of 0.1 to 1.6 cm. The selected fault of the main event is in good agreement with the existence of a detachment surface inferred from the tectonics of this half-graben.     

A comparative study of the design spectra defined by Eurocode 8, UBC, IBC and Turkish Earthquake Code on R/C sample buildings

Earthquake codes have been revised and updated depending on the improvements in the representation of ground motions, soils and structures. These revisions have been more frequently seen in recent years. One of the key changes in earthquake codes has been performed on the design spectra. In this paper, the design spectra recommended by Turkish Earthquake Code and three other well known codes (Uniform Building Code, Eurocode 8, and International Building Code) are considered for comparison. The main purpose of this study is to investigate the differences caused by the use of different codes in the dynamic analysis and seismic verification of given types of buildings located at code defined different sites. The differences in expressions and some important points for elastic and inelastic spectra defined by the codes are briefly illustrated in tables and figures. Periods, base shears, lateral displacements and interstory drifts for the analyzed buildings located at code defined ground type are comparatively presented.     

Methane hydrate formation comparisons in media with and without a water source supply

Water is a necessary element during gas hydrate formations. Therefore, by analyzing water depletion changes in media, the reaction characteristics of methane hydrate in media can be studied. In this study, two water sources supplying some liquid water which may be consumed by the methane hydrate formation reactions were designed and assembled. Using them, the full formation processes of methane hydrate was studied. Experimental results show the following： If heat released from nucleation reaction of methane hydrate is diffused rapidly, the nucleation ratios will be enhanced discernibly. While the hydrate is formed, a force is generated that sucks fresh water from the source into the vicinity of the hydrate, slowing down the cementation process and causing some hydrate grain dissociation. As a result of cementation differences, the hydrate reaction processes with different water sources present linear or quadratic equation characteristics. After a few repeated dissociation and formation processes of some hydrate grains caused by the fresh water, the gas amounts contained in hydrate will be significantly enhanced.     

天津地区典型土壤剖面饱和烃分布特征及环境意义

分析了天津地区不同环境功能区7 条土壤剖面中饱和烃含量、组成及部分地球化学参数 的变化规律, 比较了不同土壤剖面饱和烃在纵向上的变化特征。结果表明, 市区( 南开区) 及近郊 区( 武清区, 北辰区和宁河县交界处) 表层土饱和烃含量最高, 其他剖面含量较低; 随深度增大, 饱 和烃含量均有所降低, 但不同剖面变化幅度不同, 表层含量较高的剖面随深度增大, 饱和烃含量 降低幅度较大, 反之则较小。根据部分典型地球化学参数的纵向变化特征, 推测表层土壤饱和烃 主要为石油源和植物源的混合源, 且市区和郊区主要受石油源控制。不同土壤剖面表层土污染源 存在差别。同一剖面表层土壤( <30cm) 不同层次的样品的饱和烃污染源较为接近; 剖面深部( > 30cm) 不同层次样品中正构烷烃不同于表层, 且成因复杂, 既受来源于土壤中有机质降解产物的 影响, 又受表层土中饱和烃纵向迁移作用的影响。对于甾、萜类化合物, 表层土壤中饱和烃含量较 高的剖面, 深层土壤受表层土壤甾、萜类污染物迁移作用的影响; 表层土壤中饱和烃含量较低的 剖面, 深层土壤受表层土壤甾、萜类污染物影响较小。     

基于多参数指标的长江口滨岸多环芳烃来源辨析

在长江口滨岸及临近排污口、滨岸河流、城市中心城区采集悬浮颗粒物、表层沉积物、街道灰尘等样品, 分别利用GC-MS 和GC-C-IRMS 定量分析了不同环境介质中的多环芳烃 (PAHs) 与有机单体化合物稳定碳同位素(δ¹³C), 开展了基于PAH 环数、分子量特征比值和有机单体化合物稳定碳同位素组成等参数指标的长江口滨岸悬浮颗粒物与表层沉积物中PAHs 源解析研究。研究结果显示, 长江口滨岸悬浮颗粒物与表层沉积物中的PAH 化合物主要以3~4 环为主, 与吴淞排污口、石洞口污水处理厂、黄浦江、滨岸小河流以及上海中心城区等潜在来源区域不同环境介质中的PAHs 组成特征相似, 主要来源于汽油、柴油、煤炭和木材的不完全燃烧以及石油残余物的混合。其中, 木材和煤炭不完全燃烧形成的PAHs 以及石油残余物, 枯季经过滨岸河流及排污口直接输入, 洪季则为城市街道灰尘被暴雨冲刷, 随地表 径流最终汇入河口; 汽车排放(汽油、柴油不完全燃烧) 产生的PAHs 主要富集在城市交通区和商业区的街道灰尘中, 枯季借助区域盛行风迁移至河口区, 洪季则主要通过暴雨径流冲刷进入河口。     

Runoff quality prediction from small urban catchments using SWMM

The RUNOFF block of EPA's storm water management model (SWMM) was used to simulate the quantity and quality of urban storm water runoff from four relatively small sites (i.e. 5·97–23·56 ha) in South Florida, each with a specific predominant land use (i.e. low density residential, high density residential, highway and commercial). The objectives of the study were to test the applicability of this model in small subtropical urban catchments and provide modellers with a way to select appropriate input parameters to be used in planning studies. A total of 58 storm events, measured by the US Geological Survey (USGS), provided hyetographs, hydrographs and pollutant loadings for biological oxygen demand (BOD₅), total suspended solids (TSS), total Kjeldahl nitrogen (TKN) and lead (Pb), and were used for calibration of the model. Several other catchment characteristics, also measured or estimated by USGS, were used in model input preparation. Application of the model was done using the Green–Ampt equation for infiltration loss computation, a pollutant accumulation equation using a power build-up equation dependent on the number of dry days, and a power wash-off equation dependent on the predicted runoff rate. Calibrated quantity input parameters are presented and compared with suggested values in the literature. The impervious depression storage was generally found to be the most sensitive calibration parameter, followed by the Manning's roughness coefficients of conduit and overland flow, the Green–Ampt infiltration parameters and, finally, the pervious depression storage. Calibrated quality input parameters are presented in the form of regression equations, as a function of rainfall depth and the number of antecedent dry days. A total of 16 independent rainfall events were used for verification of the model, which showed a good comparison with observed data for both hydrographs and pollutant loadings. Average model predictions for the four constituent concentrations from the verification runs also showed good agreement with NURP published values in Florida and US sites. © 1998 John Wiley & Sons, Ltd.     

兰坪—思茅盆地钾盐矿床的物质来源探讨

云南兰坪—思茅盆地是我国重要的成钾盆地。综合前人的研究成果,简要介绍了该地区的地质概况。对兰坪—思茅盆地钾盐矿床的物质来源进行了阐述和讨论,认为该盆地钾盐矿床的物质来源以残存古海水为主,并有陆源水体的补给。盆地内的富钾火山凝灰岩、古盐和风化盐也可能为该盆地钾盐矿床提供物源,至于深部地下卤水是否提供物源还需更深入的研究论证。兰坪—思茅盆地钾盐矿床成矿物源具有多源性。