速度传感反馈地震计的动态范围上限

在开环参数一定的条件下,速度传感反馈地震计中的环路滤波是影响地震计主要技术指标的关键环节之一.本文探讨了一阶极点高通、一阶极点低通、一阶零点高通、双一阶和零阶环路滤波在扩展地震计动态范围上限方面的优缺点.研究指出,对于用闭环反馈直接生成主导二阶极点的速度传感反馈地震计,一阶零点高通环路滤波的优点较多;若允许在环外生成主导二阶极点,则零阶环路滤波也不失为一个较好的方案.     

水平地震作用下无锚固储罐应力与应变响应分析

在考虑地基与储罐相互作用的情况下,采用有限元法对储罐在水平地震荷载作用下的应力及应变反应进行了数值计算。对3×104m3和2×103m3罐壁应力及应变的分析结果表明:环向、轴向应力及应变的分布形式呈现出明显的下部大上部小的特点,在偏底部的位置出现应力和应变的峰值;储液罐在水平地震作用下“象足”变形是由纵向压应力达到屈曲临界应力导致的屈曲破坏,不是强度破坏,即破坏属于失稳破坏而非强度破坏。     

层状地基端承桩扭转动力阻抗研究

本文采用Novak薄层法推导粘弹性地基的扭转动力阻抗,并将其用于考虑桩土相互作用的单桩扭转动力阻抗,又通过传递矩阵法将此公式推广到求取层状地基单桩扭转动力阻抗。而且本文以工程中常用的端承桩为例,推导了层状地基中端承桩扭转动力阻抗的简化计算公式。根据此公式,分析了频率、上覆软土层厚度、上覆软土层刚度等因素对单桩扭转动力阻抗的影响,分析结果表明,随着振动频率提高,层状地基中端承单桩的扭转动力阻抗的实部有缓慢下降的趋势,而虚部则增大;随着上覆土层厚度的增加,层状地基中端承单桩的扭转动力阻抗的实部和虚部均减小;随着上覆土层刚度的减小,层状地基中端承单桩的扭转动力阻抗的实部减小,虚部在低频段减小,而在较高频率段则增大。     

地下RC结构物地震响应特征土工离心试验的模拟

地下结构物抗震稳定性的研究具有重要实际意义。基于动态土工离心试验,应用有效应力法分析了不同水平地震作用下土层和地下RC结构物的最大水平位移、不同埋深的土层加速度和超孔隙水压力变化规律,以及结构物的破坏发展特征,并进一步与试验结果进行了相互验证和对比,取得了较好效果,为重要地下结构物的抗震设计提供了依据和参考。     

基于性能的地震工程研究的新进展及对结构非线性分析的要求

结合国际地震工程界提出的新一代基于性能的地震工程的框架方法,重点阐述了性能评估中涉及的主要问题。对性能评估使用的静力非线性分析、动力非线性分析方法进行了总结,在此基础上详细阐述了在基于概率的性能评估中有应用前景的增量动力分析方法的概念、相关问题及其应用,并简要介绍了基于增量动力分析思想提出的一些简化方法。最后提出了今后研究的建议,特别是结构非线性分析方面的研究重点。     

工程结构三维疲劳裂纹最大应力强度因子计算

介绍了裂纹的类型、裂纹尖端应力场的奇异性。以一维问题为例,推导论证了奇异单元能够很好的反映裂纹尖端应力场的奇异性。应力强度因子一般表达式表明应力强度因子与载荷呈线性关系,并依赖于物体和裂纹的几何形状和尺寸。本文借助大型通用有限元软件ANSYS,采用位移外插法计算了三维表面裂纹前沿不同位置处的应力强度因子,并与《应力强度因子手册》基于实验的理论公式计算结果相比较。结果表明:有限元结果与理论解误差较小,裂纹最深处应力强度因子最大。     

Nonlinear aspects of energy dissipation in wood-panel joints

The joints connecting vertical and horizontal elements are the "weak link" in structural systems assembled from wood panels. If they are too weak, local failures may occur, resulting in performance that is significantly below expectations. If they are too resistant, the joints may be unable to dissipate energy during vibrations, thus possibly initiating a fast progressive failure. This paper re-processes and re-elaborates the results of shaking table tests previously carried out by the author and other co-workers. The goal is to assess the feasibility of a joint which is able to dissipate energy during vibration, without degrading the connection performance.     

Damping characteristics of friction damped braced frame and its effectiveness in the mega-sub controlled structure system

Based on energy dissipation and structural control principle, a new structural configuration, called the mega- sub controlled structure (MSCS) with friction damped braces (FDBs), is first presented. Meanwhile, to calculate the damping coefficient in the slipping state a new analytical method is proposed. The damping characteristics of one-storey friction damped braced frame (FDBF) are investigated, and the influence of the structural parameters on the energy dissipation and the practical engineering design are discussed. The nonlinear dynamic equations and the analytical model of the MSCS with FDBs are established. Three building structures with different structural configurations, which were designed with reference to the conventional mega-sub structures such as used in Tokyo City Hall, are comparatively investigated. The results illustrate that the structure presented in the paper has excellent dynamic properties and satisfactory control effectiveness.     

Performance of a base isolator with shape memory alloy bars

A new and innovative base isolation device is introduced in this paper based on extensive research carried out by the authors and their co-workers. A prototype of the device was built and experimentally tested on the shaking table. The new base isolation device consists of two disks, one vertical cylinder with an upper enlargement sustained by three horizontal cantilevers, and at least three inclined shape memory alloy (SMA) bars. The role of the SMA bars is to limit the relative motion between the base and the superstructure, to dissipate energy by their super-elastic constitutive law and to guarantee the re-centring of the device. To verify the expected performance, a prototype was built and tested under sinusoidal waves of displacement of increasing frequency with different amplitudes. It is shown that the main feature of the proposed base isolation device is that for cyclic loading, the super-elastic behavior of the alloy results in wide load-displacement loops, where a large amount of energy is dissipated.     

渔洞水库地区地震活动性和构造应力场分析

统计了渔洞水库的水位变化规律,分析了水库蓄水前后库区及其附近地区的地震活动性和构造应力场特征。结果表明,水库蓄水前后研究区地震活动的图像、强度和频次都没有明显变化;水库蓄水和水位变化对研究区构造应力场没有明显的影响。