基于脉冲频响函数的MATLAB动力方程求解方法

提出一种基于脉冲频响函数并利用MATLAB求解的方法，由于脉冲频响函数利用卷积公式进行动力微分方法计算，因此，从理论上讲，它适合于任意外力下的动力方程求解，同时，MATAL又提供了卷积函数conv，所以，在MATLAB下求解动力方程将变得十分容易。     

新型组合连梁控制结构体系

分析了连梁在水平力作用下的破坏机制，对连梁结构体系的发展及结构抗震控制进行了评述，在此基础上提出一种新型组合连梁控制结构体系，并对其进行了概念分析，提出了有待研究的若干关键问题。     

天津地区井水位年变异常研究

近年来 ,中国地震预报学者开始关注井水位的年变异常及其中短期预测意义问题 ,但井水位年变异常判别采用动态图像的定性对比方法 ,表现出一定的随意性。针对这种现状 ,文中引进概率论与数理统计中的随机过程理论与时间序列分析技术 (盛骤等 ,1989) ,提出了“井水位动态年周期法”与“相对时段速率比较法” ,解决了井水位年变异常的定量识别方法 ,并应用到天津井网 2 1口井的观测数据 (1985年以来 )分析中 ,证明了该方法的可行性与有效性。分析结果表明 ,天津井网中有 7口井在首都圈邻区 4次中强 (MS≥ 5 .8)地震之前 ,表现出 17井次的井水位年变异常 ,且多在震前 1.5～6个月内出现 ,从而再次证明了井水位年变异常具有一定的中短期预测意义     

河南省文峪金矿床构造控矿规律研究

峪金矿床是小秦岭金矿带内一大型金矿床，属韧—脆性叠加剪切带石英脉型金矿，构造是其首要控矿因素。早期韧性剪切带只对矿脉起宏观控制作用。晚期的脆性断裂为含金石英脉的直接控矿构造。成矿期脆性断裂的多次继承性活动分别控制了热液期4个成矿阶段。脆性断裂形成的空间形态对矿体形态产状具控制作用。有利的矿化富集部位为：①显示压扭性质的近东西向断裂沿走向产状变化处，沿倾向由陡变缓处，断裂面的凹凸转变处；②断裂分支复合部位；③成矿期断裂多次脉动的启张部位；④成矿期断裂构造继承性活动强的部位等。在构造控矿研究的基础上，结合前人部分研究成果。构建了该矿床构造控矿模式。     

天然气水合物体系动态演化研究（I）：地质历史演变

1995年Dickens对55．5Ma前古新世末增温事件进行了研究，提出天然气水合物作为全球环境变化重要因子的假说．认为古新世末增温事件溶解无机碳-2～-3‰的^13δC位移可以用水合物所含甲烷的释放与随后氧化成二氧化碳来解释．此后，地质历史演变中的天然气水合物演化研究蓬勃发展，本文总结古新世末增温事件、新元古代末期雪球事件、第四纪千年尺度事件等最新进展，为天然气水合物动态演化研究提供基础．开展天然气水合物-天然气体系动态演化过程数值模拟与特征分析，可望促进天然气水合物在全球变化与碳循环中作用的深入认识．     

Estimation of fundamental periods of shear‐wall dominant building structures

Shear‐wall dominant multistorey reinforced concrete structures, constructed by using a special tunnel form technique are commonly built in countries facing a substantial seismic risk, such as Chile, Japan, Italy and Turkey. In spite of their high resistance to earthquake excitations, current seismic code provisions including the Uniform Building Code (International Conference of Building Officials, Whittier, CA, 1997) and the Turkish Seismic Code (Specification for Structures to be Built in Disaster Areas, Ankara, Turkey, 1998) present limited information for their design criteria. In this study, consistency of equations in those seismic codes related to their dynamic properties are investigated and it is observed that the given empirical equations for prediction of fundamental periods of this specific type of structures yield inaccurate results. For that reason, a total of 80 different building configurations were analysed by using three‐dimensional finite‐element modelling and a set of new empirical equations was proposed. The results of the analyses demonstrate that given formulas including new parameters provide accurate predictions for the broad range of different architectural configurations, roof heights and shear‐wall distributions, and may be used as an efficient tool for the implicit design of these structures. Copyright © 2003 John Wiley & Sons, Ltd.     

Physical model for dynamic analysis of structures with FPS isolators

This article presents a physical model for frictional pendulum isolators (FPS) that is ready to be implemented in most commercial software. The model is capable of accounting for effects such as large deformations, sticking, and uplift and impact by sensing the normal loads in the isolators through a gap element. Sticking has been incorporated into the model by extending the Park–Wen hysteretic model to the case of large deformations. The proposed model has been tested against a theoretically ‘exact’ formulation leading to essentially identical results. To facilitate its use, the physical FPS model has been cast into a typical non‐linear structural element format, i.e. with deformation as input and restoring force as output. Examples of a building and a bridge have been chosen to show the potential of the element and to provide further insight into the earthquake response of structures with FPS isolators; in particular, in aspects such as the orientation in placement of the isolator, sticking, P? Δ, and other large deformation effects. Copyright © 2003 John Wiley & Sons, Ltd.     

Evaluation of predictors of non‐linear seismic demands using ‘fishbone’ models of SMRF buildings

Predictors (or estimates) of seismic structural demands that are less computationally time‐consuming than non‐linear dynamic analysis can be useful for structural performance assessment and for design. In this paper, we evaluate the bias and precision of predictors that make use of, at most, (i) elastic modal vibration properties of the given structure, (ii) the results of a non‐linear static pushover analysis of the structure, and (iii) elastic and inelastic single‐degree‐of‐freedom time‐history analyses for the specified ground motion record. The main predictor of interest is an extension of first‐mode elastic spectral acceleration that additionally takes into account both the second‐mode contribution to (elastic) structural response and the effects of inelasticity. This predictor is evaluated with respect to non‐linear dynamic analysis results for ‘fishbone’ models of steel moment‐resisting frame (SMRF) buildings. The relatively small number of degrees of freedom for each fishbone model allows us to consider several short‐to‐long period buildings and numerous near‐ and far‐field earthquake ground motions of interest in both Japan and the U.S. Before doing so, though, we verify that estimates of the bias and precision of the predictor obtained using fishbone models are effectively equivalent to those based on typical ‘full‐frame’ models of the same buildings. Copyright © 2003 John Wiley & Sons, Ltd.     

地震荷载作用下温度和围压对冻土强度影响的试验研究

通过对重塑冻结兰州黄土的动三轴试验，较系统研究了地震荷载作用下冻土的动强度特性，并且定量研究了其在不同温度(-2℃、-5℃、-7℃)和围压(1MPa、3MPa、5MPa)条件下的变化规律．结果发现：冻结黄土的动抗剪强度随围压的增大、温度的降低、振次的减少而增大；动粘聚力Cd随振次的减小和温度的降低而增大；动内摩擦角吼随振次的增大和温度的降低而增大。     

韧性剪切带的变形变质与同构造熔融作用——以中祁连地块宝库河韧性走滑剪切带为例

宝库河韧性剪切带是发育在中祁连地块北缘上的一条向北陡倾,走向近东西,宽约6 km的右行平移型韧性剪切带.剪切带内岩石原岩为泥质岩、基性岩和花岗岩,变质程度达角闪岩相,变形变质温度在685～763±46℃之间,压力在0.62～0.83±0.13 GPa范围内.其内长英质条带非常发育,规模变化较大,分布局部相对集中且受剪切带控制,走向与剪切带一致,平行于叶理,孤立无根,并在后期递进变形过程中发生不同程度的糜棱岩化、布丁化和褶皱,主要成分为长石和石英,明显不同于韧性剪切前或后侵入的花岗岩脉或岩体.长英质条带特征、REE配分模式及剪切带内岩石的变形变质温度说明剪切带内发育的长英质条带与基体是同源的,是在剪切应变过程中剪切热使围岩内部分物质发生动态熔融形成的,是同构造熔融作用的产物.