Modelling transverse dunes

Transverse dunes appear in regions of mainly unidirectional wind and high sand availability. A dune model is extended to two‐dimensional calculation of the shear stress. It is applied to simulate dynamics and morphology of three‐dimensional transverse dunes. In the simulations they seem to reach translational invariance and do not stop growing. Hence, simulations of two‐dimensional dune ?elds have been performed. Characteristic laws were found for the time evolution of transverse dunes. Bagnold's law of the dune velocity is modi?ed and reproduced. The interaction between transverse dunes led to the interesting conclusion that small dunes can travel over bigger ones. Copyright © 2004 John Wiley & Sons, Ltd.     

Aeolian abrasion and modes of fine particle production from natural red dune sands: an experimental study

A series of experiments was conducted to determine the potential for aeolian abrasion of natural dune sands to produce fine particles (< 125 µm) by (1) the release of resident fines; (2) spalling, chipping and breakage of particles; and (3) the removal of grain surface coatings. Parent samples were obtained from the surfaces of four active continental dunes and abraded using a glass ‘test tube’ chamber for up to 120 h. The fine particles produced by this abrasion process were trapped at varying time intervals and subject to detailed particle‐size analyses using a Coulter Multisizer. The abrasion of untreated parent samples produced fine particles in one of two main size classes, < 10 µm and > 50 µm, but when the parent sample was sieved to exclude particles < 250 µm, relatively more material in the range 10–50 µm was produced. For unsieved parent samples, the size range associated with the dominant mode varied according to the length of the abrasion time. The coarsest mode (> 63 µm) was dominant during the first 16 h of abrasion, then became less significant and is thought to be associated with the release of resident fines into suspension. The finest mode (< 10 µm) was absent or very weak during the first 16 h of abrasion, then became more significant and, in some instances, dominated the distribution as abrasion continued. Removal of grain surface coatings is the main source of fine material < 10 µm, and this may be a significant source of fine material in areas where sands are dominated by subrounded and rounded particles. By comparison with previous studies of aeolian particle abrasion, these natural dune sands produced very low quantities of fine material (by weight), but their spatial extent makes them potentially a significant source of dust‐sized particles at the global scale.     

从等值线图形获取DAT和GRD格式的数据文件

在盆地模拟研究工作中，需要处理大量的地质数据和地质图件，一方面，随时需要把各种数据变为可视的图形；另一方面，还时常需要从图形中得到研究中所必需的数据，例如，由构造图得到研究区域的深度数据文件。本文介绍一种从等值线图形获取DAT格式和网格化GRD格式的数据文件的方法。     

From Chicago to L.A. and Back Again: A Chicago‐Inspired Quantitative Analysis of Income Distribution in Montreal*

In a recent issue of Urban Geography (2001) , a number of key players in the 1960s and 1970s school of quantitative urban geography (called Chicago II in this article) set out some of the approach's key methodological premises and assessed its influence in the wider arena of urban studies. At about the same time, the 1920s and 1930s Chicago School of urban sociology (called the Chicago School in this article) was being reassessed in France ( Huet 2000 ), and deconstructed in Los Angeles ( Dear 2001 ). In this article, we outline a selection of basic models of urban space proposed by the Chicago School and further elaborated by Chicago II. We then consider certain aspects of three important critiques: humanist/aesthetic, Marxist, and postmodern. We argue that none of these invalidates the Chicago II approach to the study of urban areas, and we demonstrate its resilience and usefulness by way of the empirical example of Montreal. Though the results are of interest in their own right, the principal purpose of the analysis is to illustrate the type of insight that a structured quantitative approach provides and the way this approach rests on a theoretical understanding of processes at work in cities. We conclude by arguing that the humanist and Marxist critiques shed important light upon the possibilities and limits of the Chicago II approach, but that the postmodern claim that the spatial development of urban areas is not structured by at least some general processes is inaccurate.     

关于数字化记录中前兆信号的分析

介绍了如何用MATLAB工具软件—小波分析的基本理论对数字信号进行数字滤波,着重分析和研究了呼和浩特地震台形变观测资料出现各种信号,提出了小波分析理论对台站实际工作的重要性。     

Influence of vegetation on aeolian sand transport rate from a backshore to a foredune at Hasaki, Japan

The influence of vegetation on aeolian sediment transport rate in the region from a backshore to a foredune was investigated at the Hasaki Coast in Japan, where an onshore wind was predominant and the creeping beach grasses Carex kobomugi and Calystegia soldanella were major species. The comparison of cross-shore distributions of the cross-shore component of aeolian sand transport rate with and without vegetation, which were estimated on the basis of the beach profile changes and a mass conservation equation, showed that the creeping grasses influenced the aeolian sand transport rate. The landward aeolian sand transport rate rapidly decreased landward from the seaward limit of vegetation when the grasses grew. The aeolian sand transport rate reduced by 95% with a vegetation cover of 28%. On the other hand, when the grasses were absent, the landward aeolian sand transport rate did not decrease near the seaward vegetation limit, but near the foot of the foredune.     

Elastic models for nonlinear response of rigid passive piles

Recent study indicates that the response of rigid passive piles is dominated by elastic pile–soil interaction and may be estimated using theory for lateral piles. The difference lies in that passive piles normally are associated with a large scatter of the ratio of maximum bending moment over maximum shear force and induce a limiting pressure that is ~1/3 that on laterally loaded piles. This disparity prompts this study. This paper proposes pressure‐based pile–soil models and develops their associated solutions to capture response of rigid piles subjected to soil movement. The impact of soil movement was encapsulated into a power‐law distributed loading over a sliding depth, and load transfer model was adopted to mimic the pile–soil interaction. The solutions are presented in explicit expressions and can be readily obtained. They are capable of capturing responses of model piles in a sliding soil owing to the impact of sliding depth and relative strength between sliding and stable layer on limiting force prior to ultimate state. In comparison with available solutions for ultimate state, this study reveals the 1/3 limiting pressure (of the active piles) on passive piles was induced by elastic interaction. The current models employing distributed pressure for moving soil are more pertinent to passive piles (rather than plastic soil flow). An example calculation against instrumented model piles is provided, which demonstrates the accuracy of the current solutions for design slope stabilising piles. Copyright © 2014 John Wiley & Sons, Ltd.     

Steady‐state analytical solutions of flow and deformation coupling due to a point sink within a finite fluid‐saturated poroelastic layer

An exact steady‐state closed‐form solution is presented for coupled flow and deformation of an axisymmetric isotropic homogeneous fluid‐saturated poroelastic layer with a finite radius due to a point sink. The hydromechanical behavior of the poroelastic layer is governed by Biot's consolidation theory. Boundary conditions on the lateral surface are specifically chosen to match the appropriate finite Hankel transforms and simplify the transforms of the governing equations. Ordinary differential equations in the transformed domain are solved, and then the analytical solutions in the physical space for the pore pressure and the displacements are finally obtained by using finite Hankel inversions. The analytical solutions at some special locations such as the top and bottom surfaces, lateral surface, and the symmetrical axis are given and analyzed. And a case study for the consolidation of a water‐saturated soft clay layer due to pumping is conducted. The analytical solution is verified against the finite element solution. Meanwhile, an analysis of coupled hydromechanical behavior is carried out herein. The presented analytical solution is an exact solution to the practical poroelastic problem within an axisymmetric finite layer. It can provide us a better understanding of the poroelastic behavior of the finite layer due to fluid extraction. Besides, it can be applied to calibrate numerical schemes of axisymmetric poroelasticity within finite domains. Copyright © 2017 John Wiley & Sons, Ltd.     

1999年北京持续高温天气过程的诊断分析

利用北京观象台观测资料和NCEP/NCAR再分析数据,对1999年6月24日至7月2日北京一次持续性高温天气的演变和发展过程及非绝热加热作用对系统的影响进行诊断分析,结果表明：在此次高温天气发生前,欧亚大陆中高纬度环流经向度很大,欧洲北部和贝加尔湖以南为高压脊控制,中亚和我国东北地区则处于低压槽内。贝加尔湖南部的高压脊纬向延伸范围较广,在东移过程中长时间影响北京。随着贝加尔湖以南的高压脊逐渐东移,北京上空下沉增温与非绝热加热作用有所增强,北京逐渐受到高温天气影响。在高温天气发生的后半阶段,我国东北的低压槽入海后在120130°E附近维持并发展,槽前非绝热加热率很大。从垂直方向来看,加热率在500 hPa以下随高度迅速增加,根据全型涡度方程,强烈的非绝热加热率垂直分布不均作为一个明显的涡度源区,对入海低压槽的稳定维持有显著的作用。而入海低压槽的稳定维持,又阻碍了华北高压脊的东移,使其在北京地区长时间稳定少动,为北京带来多日的持续性高温天气。     

Evidence of technetium and iodine release from a sodalite-bearing ceramic waste form

Sodalites have been proposed as a possible host of certain radioactive species, specifically ⁹⁹Tc and ¹²⁹I, which may be encapsulated into the cage structure of the mineral. To demonstrate the ability of this framework silicate mineral to encapsulate and immobilize ⁹⁹Tc and ¹²⁹I, single-pass flow-through (SPFT) tests were conducted on a sodalite-bearing multi-phase ceramic waste form produced through a steam reforming process. Two samples made using a steam reformer samples were produced using non-radioactive I and Re (as a surrogate for Tc), while a third sample was produced using actual radioactive tank waste containing Tc and added Re. One of the non-radioactive samples was produced with an engineering-scale steam reformer while the other non-radioactive sample and the radioactive sample were produced using a bench-scale steam reformer. For all three steam reformer products, the similar steady-state dilute-solution release rates for Re, I, and Tc at pH (25 °C) = 9 and 40 °C were measured. However, it was found that the Re, I, and Tc releases were equal or up to 4.5x higher compared to the release rates of the network-forming elements, Na, Al, and Si. The similar releases of Re and Tc in the SPFT test, and the similar time-dependent shapes of the release curves for samples containing I, suggest that Re, Tc, and I partition to the sodalite minerals during the steam reforming process.