等距等高电磁波测距三角高程测量及精度分析

介绍了等距等高电磁波测距三角高程测量的原理，详细深入地分析了这种高程测量方法的精度，通过计算和作图表示，可直观地反映在不同条件下的精度变化情况，讨论了代替国家等级水准测量的范围和条件，可供生产实际和进一步研究参考。     

地质雷达及浅层地震在泥质粉砂岩中断裂带上的曲线特征

探讨了如何利用地质雷达及浅层地震有关原理判释泥质粉砂岩中隐伏断裂带的性质和特征。主要的工作方法是通过现场实测，分析地质雷达反映在张性断裂带和压性断裂带上的曲线特征，分析浅层地震相遇时距曲线在断裂带上的曲线特征。后者的主要特征有：（1）在断裂带上初至时间延长；（2）在断裂带上左右支时距曲线上下跳动的幅度均等；（3）在断裂带上跳动的长度不一；（4）在断裂带左右支时距曲线上下跳动或反相；（5）时距曲线呈喇叭口。阐明了地质雷达和浅层地震的原理及其在泥质粉砂岩中勘查断裂构造的效果     

GPS进行长边控制测量分析

采用基准和基准转换模型的不同会导致GPS观测边长与坐标计算边长不一致。因此由GPS测量的WGS－84坐标系向我国的北京54坐标系转换计算时，应尽可能选择参考点作对比分析。若满足精度要求，可采用全国精密参数作转换计算，若不能满足精度要求或达不到实测点的定位精度，可先将边长作高程异常改正，再对起算点作方位改正。     

非饱和膨胀土的土-水特征曲线研究

在干旱和半干旱地区 ,土体中含水量的变化常会引发各种工程问题。研究表明 ,非饱和土的工程性质不仅取决于土的组成、结构和应力状态 ,还与土中的吸力密切相关。非饱和土的土 -水特征曲线表达了土体中含水量与吸力的关系 ,是非饱和土研究的重要内容之一。     

用翁氏模型图版设计早期油气田(藏)开发方案

由于缺乏早期资料，设计早期油气田（藏）开发方案是非常困难的。在制作翁氏模型的Qctm/No-ER图版和ER-ctR图版过程提出根据探明储量No、经济极限产量Qc、假定达到峰值产量的时间tm、最终采收率ER，由翁氏模型的Qctm/No-ER图版求取增长指数b，由翁氏模型ER-ctR图版求取ctR，再求出其他参数及所有的油气田（藏）开发指标，完成早期油气田（藏）开发方案设计。     

基于广义Kопытов模型及乙型水驱曲线的综合预测法

将广义Kопытов预测模型和乙型水驱曲线方法有机的结合起来，得到了油田开发中后期——递减时期的一种预测水驱开发油田的含水率、产油量、产水量及其相应的累积产量随开发时间变化的方法，此方法克服了在水驱油田预测开发指标中二者所存在的局限性。     

Analysis of Post-Failure Slope Movements within the Framework of Hazard and Risk Analysis

The paper first recalls briefly a methodological framework to assess landslide hazard and risk analysis in terms of predisposition, triggering andrevealing factors. This framework, that reflects the mechanisms involved in the landslide, is based on the Geotechnical Characterisation of slope movements proposed by Vaunat et al. (1994) and Leroueil et al. (1996). The Geotechnical Characterisation can be schematized by a 3-D matrix having the following axes: types of movement; types ofmaterial; and the four stages of movement: pre-failure, failure, post-failure andreactivation. For each relevant element of this 3-D matrix, there is a characterisationsheet including: the controlling laws and parameters, the predisposition factors, thetriggering or aggravating factors, the revealing factors and the consequences of the movement. The paper focuses afterwards on the post-failure stage, which generallyis the most destructive, and on the mobility index. It is shown that this laterindex can be described as the product of sub-indices associated with failure, brittlenessof the material, ability of the soil to develop pore pressures, geometry of the moving soil mass and characteristics of the terrain. It is also shown how these aspectscan be incorporated into the Geotechnical characterisation of slope movements. This seems to provide a rational basis for examining slope movements at the post-failure stage and assessing associated risks.     

Simulation of individual particle movement in a gravel streambed

A two‐dimensional simulation model of travel distances of individual particles in a gravel‐bed river is presented. The model is based on a number of rules, which include particle size, entrainment, trajectory, distance of movement and entrapment. Particle interactions are controlled by resistance fields defined about each obstacle and critical elevation defined in the model. Resistance fields, particle dropping and critical elevation rules control particle interactions. The interaction rules cause the particles to develop pebble clusters, stone cells and transverse structures (transverse ribs). The simulated travel distances of individual particles are consistent with reported field results. Individual particle travel distances were simulated using two different models; one without interactions between the individual particles and the stationary bed and one with interactions. The case without interactions demonstrates the random nature of sediment transport, and narrow ranges of travel distances. Wider ranges of travel distances, similar to those for natural situations, were obtained for the cases with interactions. The more intense the interaction between the mobile stones and the stationary ones, the wider the range of distances of travel for a given particle size. Modelling the mean travel distance yielded a result similar to that published previously, which was based on empirical data. Well developed bed‐surface structures were obtained for relatively poorly sorted sediment with intense interactions between particles. Transverse structures developed when relatively large particles were allowed to move. Copyright © 2002 John Wiley & Sons, Ltd.     

铅橡胶复合阻尼器的性能试验研究

介绍作者提出的铅橡胶复合阻尼器的构造与耗能原理，通过不同形状，不同大小铅心的8个铅橡胶复合阻尼器的循环荷载试验，研究了频率、应变幅值、循环次数、铅芯直径、竖向压力等对铅橡胶复合阻尼器的影响规律。研究结果表明，铅橡胶复合阻尼器工作性能稳定，耗能性能和抗疲劳性能好。     

改进的最小二乘法在水文分析计算中的应用

在水分析计算中，经常涉及到变量之间的线性或非线性拟合，而在拟合各种特性曲线时，通常应用以实测资料与拟合曲线间的误差平方和最小作为目标函数的方法——最小二乘法，但这种方法忽视了所有实测点应与拟合曲线间的相对误差尽量不超过某一百分比的原则，为了达到上述要求，提出了非线性的加权最小二乘法及线性相关方程的最小距离平方和法，探讨改进了传统的最小二乘法达到优化的效果。最小距离平方和法与常用的图解法相比，本法所得成果较为客观；与传统的单方向(x或y方向)最小二乘回归法相比，所求线性方程不会因坐标系的选取而改变。最后应用算例进行了初步讨论。