南海北部深水盆地沉积-构造的差异性及其油气意义

南海北部深水区自西向东依次分布着琼东南盆地、珠江口盆地、台西南盆地等新生代被动陆缘盆地,这些盆地经历了大致相当的从裂陷到坳陷的构造演化史,但在张裂活动过程中存在着明显的沉积-构造的差异性。构造沉降特征分析显示:在同一构造带上自西向东有盆地主要构造沉降发生的时段逐步变晚的趋势;在不同构造带上自北向南有盆地主要构造沉降发生的时段逐步变晚的趋势。这种沉积-构造的差异性对烃源岩的发育类型、分布及生储盖组合等方面有明显的控制作用,表现为:裂谷期构造沉降幅度大的盆地,陆相烃源岩发育,以陆生陆储陆盖型成藏组合为主;裂后期构造沉降幅度大的盆地,海相烃源岩发育规模较大,海生海储海盖型成藏组合及混生海储海盖型生储盖组合所占分量逐渐增多。推测渐新统湖相-湖沼相及海陆过渡相源岩和中新统海相烃源岩应是南海北部深水区油气的主要来源,陆生海储海盖型、海生海储海盖型及混生海储海盖型生储盖组合应是深水区基本生储盖组合类型。     

南京某深基坑边坡支护设计与施工

南京某深基坑周边环境较为复杂,地下水丰富,基坑开挖较深,最深处达13m。根据周边环境的情况和开挖的深度,采用了钻孔灌注桩和土钉锚杆相结合的支护形式。分析了该基坑施工的技术要点,通过监测结果,说明该支护方案是可行的。     

幔源CO_2释出机理、脱气模式及成藏机制研究进展

针对幔源CO2如何从地幔岩浆中脱出并进入沉积地层中形成CO2气藏聚集这一关键问题,总结了国内外研究进展和前缘方向。研究表明,地幔深部的碱性玄武岩浆和碱性岩浆才是深部流体和CO2等挥发份大量赋存、渗滤和释出的场所。浅成侵入岩、次火山岩和火山通道等是CO2释放和聚集的有利位置,岩浆期后和岩浆衰弱期的热液活动阶段是CO2大量释放和聚集的有利时期。幔源CO2进入沉积盆地中具有3种脱气模式,即沿岩石圈断裂直接脱气模式、热流底辟体脱气模式和壳内岩浆房-基底断裂组合脱气模式。CO2的固有物化性质决定其运移相态多样,具有运移和聚集过程同步的特征。只有在满足大量的化学消耗及地层水或原油的溶解和耗散之后才能形成CO2有效聚集。幔源CO2成藏和分布主要受岩浆气源体和气源断裂体系的控制。今后,在超临界CO2及其对油气运移聚集的作用、CO2与深大断裂及火山岩的关系、CO2脱气运移机制、CO与常规烃类油气的耦合差异成藏机制等方面仍需要进一步的研究和探索。     

地震勘探技术在深部找煤中的应用

成矿理论与勘探实践证明,东部一些老矿由于勘探深度、范围的限制以及认识上的局限,在矿区深部、周边仍有一些矿未能发现和查明,其中相当一部分仍具有找矿潜力;而寻找西部新的煤炭资源是国家“稳定东部发展西部”战略需要。针对中国东西部不同的地质条件和勘探目标,其地震勘探野外施工方法及资料处理原则有所差异;而资料解释在东部以查明地层赋存形态、煤层赋存范围、构造发育特征为主,西部则以寻找煤系地层波阻抗差异明显、连续性好的反射波组为解释重点。地震勘探技术在中国东西部的二个典型地震时间剖面佐证了其在深部找矿的应用效果。     

钢筋混凝土圆环内支撑在软土深基坑支护中的设计与应用

通过对星河世纪城B2地块工程基坑成功支护设计实例介绍,全面阐述了钢筋混凝土圆环内支撑体系独特的布置形式、内力计算模式、方法和结果,以及在施工过程中的质量保证,为软土地基中类似基坑工程提供借鉴。     

Bayesian estimation of seismic hazard for two sites in Switzerland

Seismic hazard analysis is based on data and models, which both are imprecise and uncertain. Especially the interpretation of historical information into earthquake parameters, e.g. earthquake size and location, yields ambiguous and imprecise data. Models based on probability distributions have been developed in order to quantify and represent these uncertainties. Nevertheless, the majority of the procedures applied in seismic hazard assessment do not take into account these uncertainties, nor do they show the variance of the results. Therefore, a procedure based on Bayesian statistics was developed to estimate return periods for different ground motion intensities (MSK scale).Bayesian techniques provide a mathematical model to estimate the distribution of random variables in presence of uncertainties. The developed method estimates the probability distribution of the number of occurrences in a Poisson process described by the parameter . The input data are the historical occurrences of intensities for a particular site, represented by a discrete probability distribution for each earthquake. The calculation of these historical occurrences requires a careful preparation of all input parameters, i.e. a modelling of their uncertainties. The obtained results show that the variance of the recurrence rate is smaller in regions with higher seismic activity than in less active regions. It can also be demonstrated that long return periods cannot be estimated with confidence, because the time period of observation is too short. This indicates that the long return periods obtained by seismic source methods only reflects the delineated seismic sources and the chosen earthquake size distribution law.     

Some comparisons between mining-induced and laboratory earthquakes

Although laboratory stick-slip friction experiments have long been regarded as analogs to natural crustal earthquakes, the potential use of laboratory results for understanding the earthquake source mechanism has not been fully exploited because of essential difficulties in relating seismographic data to measurements made in the controlled laboratory environment. Mining-induced earthquakes, however, provide a means of calibrating the seismic data in terms of laboratory results because, in contrast to natural earthquakes, the causative forces as well as the hypocentral conditions are known. A comparison of stick-slip friction events in a large granite sample with mining-induced earthquakes in South Africa and Canada indicates both similarities and differences between the two phenomena. The physics of unstable fault slip appears to be largely the same for both types of events. For example, both laboratory and mining-induced earthquakes have very low seismic efficiencies where _a is the apparent stress and is the average stress acting on the fault plane to cause slip; nearly all of the energy released by faulting is consumed in overcoming friction. In more detail, the mining-induced earthquakes differ from the laboratory events in the behavior of as a function of seismic momentM ₀. Whereas for the laboratory events 0.06 independent ofM ₀, depends quite strongly onM ₀ for each set of induced earthquakes, with 0.06 serving, apparently, as an upper bound. It seems most likely that this observed scaling difference is due to variations in slip distribution over the fault plane. In the laboratory, a stick-slip event entails homogeneous slip over a fault of fixed area. For each set of induced earthquakes, the fault area appears to be approximately fixed but the slip is inhomogeneous due presumably to barriers (zones of no slip) distributed over the fault plane; at constant , larger events correspond to larger _a as a consequence of fewer barriers to slip. If the inequality _a / 0.06 has general validity, then measurements of _a =µE _a /M ₀, where is the modulus of rigidity andE _a is the seismically-radiated energy, can be used to infer the absolute level of deviatoric stress at the hypocenter.     

The upper mantle structure of the yakutian kimberlite province,eastern Russia

Deep seismic sounding in the region of the Mirnyi kimberlite field indicates that the boundary velocity of the uppermost mantle is elevated (v _b=8.6–8.8 km/sec) and extremely variable near the Mir kimberlite pipe. These velocity heterogeneities are probably associated with the kimberlite magmatism and may be useful in the identification of other kimberlite fields.     

Micromechanics of the velocity and normal stress dependence of rock friction

Among the second-order effects on friction the most important are those of variable normal stress and of slip velocity. Velocity weakening, which is usually considered the source of the stick-slip instability in rock friction, has been observed in velocity stepping experiments with Westerly granite. The friction change, , was –0.01 to –0.008 for a tenfold velocity increase. Using normal closure measurements, we observed dilation upon each increase in sliding rate. We also observed, for the first time, time-dependent closure between surfaces during static loading. The dilation that occurred during the velocity stepping experiment was found to be that expected from the static time-dependent closure phenomenon. This change in closure was used to predict friction change with an elastic contact model. The calculated friction change which results from a change in contact area and asperity interlocking, is in good agreement with the observed velocity dependence of steady-state friction. Variable normal stress during sliding has two effects, first in creating new partial slip contacts and locking some existing fully sliding contacts and second in increasing interlocking, for instance when normal load is suddenly increased. As a result, a transient change in friction occurs upon a sudden change in normal load.