Natural hydraulic cracking: numerical model and sensitivity study

Natural hydrofracturing caused by overpressure plays an important role in geopressure evolution and hydrocarbon migration in petroliferous basins. Its mechanism is quite well understood in the case of artificial hydraulic fracturing triggered by high-pressure fluid injection in a well. This is not so for natural hydraulic fracturing which is assumed to initiate as micro-cracks with large influence on the permeability of the medium. The mechanism of natural hydraulic cracking, triggered by increasing pore pressure during geological periods, is studied using a fracturing model coupled to the physical processes occurring during basin evolution. In this model, the hydraulic cracking threshold is assumed to lie between the classical failure limit and the beginning of dilatancy. Fluid pressure evolution is calculated iteratively in order to allow dynamic adjustment of permeability so that the fracturing limit is always preserved. The increase of permeability is interpreted on the basis of equivalent fractures. It is found that fracturing is very efficient to keep a stress level at the rock’s hydraulic cracking limit: a fracture permeability one order of magnitude larger than the intrinsic permeability of the rock would be enough. Observations reported from actual basins and model results strongly suggest that natural hydraulic cracking occurs continuously to keep the pressure at the fracturing limit under relaxed stress conditions.     

Gravity and magnetic signatures of volcanic plugs related to Deccan volcanism in Saurashtra, India and their physical and geochemical properties

The Bouguer anomaly and the total intensity magnetic maps of Saurashtra have delineated six circular gravity highs and magnetic anomalies of 40-60 mGal (10⁻⁵m/s²) and 800-1000 nT, respectively. Three of them in western Saurashtra coincide with known volcanic plugs associated with Deccan Volcanic Province (DVP), while the other three in SE Saurashtra coincide with rather concealed plugs exposed partially. The DVP represents different phases of eruption during 65.5±2.5 Ma from the Reunion plume. The geochemical data of the exposed rock samples from these plugs exhibit a wide variation in source composition, which varies from ultramafic/mafic to felsic composition of volcanic plugs in western Saurashtra and an alkaline composition for those in SE Saurashtra. Detailed studies of granophyres and alkaline rocks from these volcanic plugs reveal a calc-alkaline differentiation trend and a continental tectonic setting of emplacement. The alkaline plugs of SE Saurashtra are associated with NE-SW oriented structural trends, related to the Gulf of Cambay and the Cambay rift basin along the track of the Reunion plume. This indicates a deeper source for these plugs compared to those in the western part and may represent the primary source magma. The Junagadh plug with well differentiated ring complexes in western Saurashtra shows well defined centers of magnetic anomaly while the magnetic anomalies due to other plugs are diffused though of the same amplitude. This implies that other plugs are also associated with mafic/ultramafic components, which may not be differentiated and may be present at subsurface levels. Paleomagnetic measurements on surface rock samples from DVP in Saurashtra suggest a susceptibility of 5.5×10⁻² SI units with an average Koenigsberger ratio (Q_n) of almost one and average direction of remanent magnetization of D=147.4° and I=+56.1°. The virtual geomagnetic pole (VGP) position computed from the mean direction of magnetization for the volcanic plugs and Deccan basalt of Saurashtra is 30°N and 74°W, which is close to the VGP position corresponding to the early phases of Deccan eruption. Modeling of gravity and magnetic anomalies along two representative profiles across Junagadh and Barda volcanic plugs suggest a bulk density of 2900 and 2880 kg/m³, respectively and susceptibility of 3.14×10⁻² SI units with a Q_n ratio of 0.56 which are within the range of their values obtained from laboratory measurements on exposed rock samples. The same order of gravity and magnetic anomalies observed over the volcanic plugs of Saurashtra indicates almost similar bulk physical properties for them. The inferred directions of magnetization from magnetic anomalies, however, are D=337° and 340° and I=−38° and −50° which represent the bulk direction of magnetization and also indicate a reversal of the magnetic field during the eruption of these plugs. Some of these plugs are associated with seismic activities of magnitude ≤4 at their contacts. Based on this analysis, other circular/semi-circular gravity highs of NW India can be qualitatively attributed to similar subsurface volcanic plugs.     

Models of passive margin inversion: implications for the Rhenohercynian fold-and-thrust belt, Belgium and Germany

Positive tectonic inversion is related to the transmission of compressional stresses along a décollement into the foreland of an orogenic zone. This stress and strain concentration in regions remote from the main orogenic front is commonly related to the presence of pre-existing rheological heterogeneities such as normal syn-depositional faults. During inversion, these pre-existing normal faults are reactivated as reverse faults. Tectonic inversion in the Rhenohercynian fold-and-thrust belt during the Variscan Orogeny shows that inversion is likely synchronous with the onset of collision in the hinterland. Here, we present the results of a simplified thermo-mechanical model (STM) which allows one to study strain partitioning between two orogenic zones. We show that, if the two orogenic zones have the same mechanical properties, the viscosity of the décollement, which links them, controls the initial strain partitioning. During subsequent finite shortening, erosional processes determine the partitioning of strain rate. The presence of a weak structure in the inverted zone and of a low-viscosity décollement leads to initial strain concentration in the inverted track rather than in the collision zone and a progressive decrease in strain partitioning between the two orogenic zones. The STM results are in good agreement with results of a 2D finite-element model. We conclude that, in the western part of the Rhenohercynian Massif, simultaneous uplift and deformation within the Mid-German Crystalline Rise (the main collision zone) and the Ardenne Anticlinorium (the inverted zone) lead to interpreting this orogenic event as a case of vice tectonic rather than the propagation of a ‘wave of folding’ towards the Variscan front, as suggested by previous authors.     

GIS与土壤溶质运移模型结合研究进展

地理信息系统对土壤溶质模型研究而言，使用者的要求与GIS所能提供的功能之间，还存在巨大的差距。出于对环境问题的关注，土壤中水分及溶质运移的规律及其对环境的影响，成为当前研究的热点。随着对土壤溶质运移模型研究的深入，一方面由于田间土壤特性具有很大的空间变异；另一方面，在实际应用中，往往溶质运移的宏观特征而非微观特征，具有更重要的意义。将溶质运移模型与GIS技术结合，定量研究空间尺度的溶质运移，成为溶质运移研究的必然发展趋势。由于计算机软硬件技术的发展，GIS正处于一个高速发展的时期。将GIS与溶质运移模型相结合，或者进一步，以GIS理论和技术为基础，建立基于GIS的溶质运移模型，将对溶质运移的规律及其对环境的影响，做出更深入和准确的描述。     

云南松根系对土壤牵引效应测试系统的设计与实现

目前在野外对云南松根系与土壤的机械效庆的研究，由于测试研究受多种因数的影响，开展研究困难较大，研究精度也受到一定程度的影响，这对较深入的描述根系与土壤相互作用的机械效应带来一定的困难。本文基于这一实际，设计了能在室内和野外进行实时测试分析的测试系统，并配套了支持PCMCIA插槽的DAQP－12型模数转换（A／D）卡，以及直流电供电的QT－300型调理装置。结合所配套的硬件，利用Visual C在Windows95/98平台编写了软件，经过实际试验测试，系统各项性能能够满足云南松根系对土壤的机械效应研究的测试分析要求。     

The geography of water conflict and cooperation: internal pressures and international manifestations

Studies on transboundary water conflict and cooperation generally consider interstate relations over shared water resources as distinct from intrastate relations. While connections have been made between international water relations and regional relationships in general, it is conceivable that international water conflict and cooperation may also be influenced by domestic water events and vice versa. This paper seeks to investigate the dynamics of water interactions across geographic scale and their relationship to broader international affairs. The research approach involves the creation of an analytical framework for assessing possible linkages between external and internal interactions over freshwater resources. The framework is applied to three case studies – the Middle East, South Asia and Southern Africa – utilizing 'event data'. To validate the findings from the quantitative analyses, the results are compared with conventional qualitative understandings of water and overall relations in the three regions. The comparison demonstrates not only the efficacy of the analytical framework in general, but also highlights, at least in terms of the specific case studies selected, the disparate water dynamics across geographic regions and the importance of considering water events, both national and international, within larger political and historical contexts.     

The global rainforest mapping project JERS-1:a paradigm of international collaboration for monitoring land cover change

The Global Rainforest Mapping (GRFM) project was initiated in 1995 and, through a dedicated data acquisition policy by the National Space Development Agency of Japan (NASDA), data acquisitions could be completed within a 1.5-year period, resulting in a spatially and temporally homogeneous coverage to contain the entire Amazon Basin from the Atlantic to the Pacific; Central America up to the Yucatan Peninsular in Mexico; equatorial Africa from Madagascar and Kenya in the east to Sierra Leone in the west; and Southeast Asia, including Papua New Guinea. To some extent, GRFM project is an international endeavor led by NASDA, with the goal of producing spatially and temporally contiguous Synthetic Aperture Radar (SAR) data sets over the tropical belt on the Earth by use of the JERS-1 L-band SAR, through the generation of semi-continental, 100m resolution, image mosaics. The GRFM project relies on extensive collaboration with the National Aeronautics and Space Administration (NASA), the Joint Research Center of the European Commission (JRC) and the Japanese Ministry of International Trade and Industry (MITI) for data acquisition, processing, validation and product generation. A science program is underway in parallel with product generation. This involves the agencies mentioned above, as well as a large number of international organizations, universities and individuals to perform field activities and data analysis at different levels.     

Wetland vegetation biomass estimation and mapping from Landsat ETM data:a case study of Poyang Lake

Poyang Lake is the largest freshwater lake in China. This paper conducted a digital and rapid investigation of the lake’s wetland vegetation biomass using Landsat ETM data acquired on April 16, 2000. First, utilizing the false color composite derived from the ETM data as one of the main references, the authors designed a reasonable sampling route for field measurement of the biomass, and carried it out on April 18-28, 2000. Then after both the sampling data and the ETM data were geometrically corrected to an equal-area projection of Albers, linear relationships among the sampling data and some transformed data derived from the ETM data and the ETM 4 were calculated. The results show that the sampling data is best relative to the band 4 data with a high correlation coefficient of 0.86, followed by the DVI and NDVI data with 0.83 and 0.80 respectively. Therefore, a linear regression model, which was based on the field data and band 4 data, was used to estimate the total biomass of entire Poyang Lake, and then the map of the biomass distribution was compiled.