半空间埋置动点源荷载问题的传递矩阵法

引用了流体饱和两相多孔介质的动力控制方程分析半空间埋置动点源荷载问题的位移和变形。经过Laplace Hankel变换 ,控制方程化成常微分方程组。利用数学软件mathmatic对上述方程组求解 ,可以得到单层砂土的传递矩阵。分析过程中 ,假设在两层面上 ,位移与应力相互连续 ,可以借鉴有限元的思想进行耦合计算。这样就获得了在饱和砂土中施加竖向动荷载问题的Laplace Hankel变换解 ,其最终的解还需要通过Laplace Hankel逆变换得到     

Triaxial stress state deep in orogenic belts: an example from Turkey

A rare metachert pebble containing amphibole grains with microboudin structures in a wide range of orientations provides an opportunity to perform stress analysis in two orthogonal orientations on the foliation surface. The sample was analysed by the microboudin method to infer the triaxial stress state during microboudinage. Stress parameters proportional to the far-field differential stress were determined for sodic amphibole grains in the two orientations. The ratio of the stresses in the two orthogonal orientations (σ₁−σ₂)/(σ₁−σ₃) was calculated to be 0.64, indicating that σ₂ lies closer to the midpoint between σ₁ and σ₃ than to σ₃.     

适用于大旋转角的三维基准转换的一种简便模型

基于大角度的空间直角坐标转换，提出了以方向余弦为参数、适用于任何角度旋转的空间直角坐标转换的简明计算方法。     

地图数字化位置误差的协方差函数

针对数字化地图的精度 ,利用平稳随机过程的理论来估计位置数据的不确定性 ,提出了一套计算方法 ,主要内容包括运用平稳随机过程的各态历经性 ,对任意点坐标的X、Y按距离拟合求定其协方差 ,其特点是应用了统计估计原理 ,使得到的结果更为合理和简便。     

Correcting method of eddy covariance fluxes over non-flat surfaces and its application in ChinaFLUX

Although Eddy Covariance (EC) technique is one of the best methods for estimating the energy and mass exchanges between underlying surface and atmosphere in micrometeorology, errors and uncertainties still exist without necessary corrections. In this paper, we will focus on the effect of coordinate system on the eddy fluxes. Based on the data observed over four sites (one farmland site, one grassland site and two forest sites), the effects of three coordinate system transforming methods (Double Rotation-DR, Triple Rotation-TR and Planar Fit-PF)on the turbulent fluxes are analyzed. It shows that (i) the corrected fluxes are more or less than the uncorrected fluxes, which is related mainly to the sloping degree of surface, wind speed and wind direction; and (ii) pitch angle has a sinusoidal dependence on wind direction, especially in the regular sloping terrain; and (iii) PF method is something like the simplification of TR or DR,and there are not obvious distinctions in correction in sloping grassland and flat farmland, but PF method is not suitable for uneven and irregular forest sites.     

Establishment of apparent quantum yield and maximum ecosystem assimilation on Tibetan Plateau alpine meadow ecosystem

The alpine meadow is widely distributed on the Tibetan Plateau with an area of about 1.2×106kn2. Damxung County, located in the hinterland of the Tibetan Plateau, is the place covered with this typical vegetation. An open-path eddy covariance system was set up in Damxung rangeland station to measure the carbon flux of alpine meadow from July to October,2003. The continuous carbon flux data were used to analyze the relationship between net ecosystem carbon dioxide exchange (NEE) and photosynthetically active radiation (PAR), as well as the seasonal patterns of apparent quantum yield (α) and maximum ecosystem assimilation (Pmax).Results showed that the daytime NEE fitted fairly well with the PAR in a rectangular hyperbola function, with α declining in the order of peak growth period (0.0244 μmolCO2 · μmol-1pAR) ＞early growth period ＞ seed maturing period ＞ withering period (0.0098 μmolCO2 · μmol-1pAR).The Pmax did not change greatly during the first three periods, with an average of 0.433mgCO2· m-2· s-1, i.e. 9.829 μmolCO2· m-2· s-1. However, during the withering period, Pmax was only 0.35 mgCO2 · m-2 · s-1, i.e. 7.945 μmolCO2 · m-2 · s-1. Compared with other grassland ecosystems, the α of the Tibetan Plateau alpine meadow ecosystem was much lower.     

石墨炉原子吸收光谱法测定土壤样品中镉

采用磷酸氢二铵作基体改进剂塞曼扣背景石墨炉原子吸收光谱法测定土壤样品中镉，方法检出限DL=0．012μg／g，精密度RSD在3．55％～7．33％，满足了土壤样品中镉测定的镉质量要求。     

Direct Current Plasma Emission Spectrometric Determination of Major, Minor and Trace Elements in Microwave Oven Acid Leachates of Powdered Whole Coal Samples

Major concentrations of Al₂O₃, Fe₂O₃, MgO, CaO, Na₂O and K₂O, minor levels of TiO₂, P₂O₅ and thirty petrologically, geochemically and environmentally significant trace elements have been determined in microwave oven acid leachates of whole powdered coal samples by direct current plasma‐atomic emission spectrometry (DCP‐AES). A single sample preparation procedure was suitable for all the determinations with no additional dilution step for major elements solution. Dried samples (0.5 g) were treated in low‐pressure PFA digestion vessels with HF/HCl/HNO₃/HClO₄ acids to quantitatively extract the analytes from the bulk material, while leaving the major part of organic matrix as a residue. The major constituents of geological samples, in particular the easily ionised elements (EIEs) such as alkali and alkaline earths, may complicate the instrumental determinations in DCP‐AES because of differential enhancements of elemental emission intensities and stray light interferences. Taking account of these factors, the coal matrix is considered to have very low major oxide totals as compared to many other common geo‐environmental and related materials (rocks, sediments, soil, ashes etc.). The sample size employed here, while yielding a relatively concentrated solution to cover a wide range of elemental determinations, provided a sample matrix that significantly diminished interferences for DCP measurements. The need for closely matching the unknowns and calibrators was eliminated except for overall acidity and an excess quantity of caesium for EIE buffering. Calibration of the spectrometer was accomplished by simple aqueous single element solutions as high concentration calibrators in addition to a reagent blank as a low concentration calibrator. Two point working curves were established to allow for the maximum concentrations of each element expected in the unknowns. The precision of determinations under routine conditions as well as the reproducibility of the leaching and precision of instrumental measurements have been evaluated. Relative standard deviations (RSD) were of 1–2% for those elements whose concentrations in solid samples were well above the limits of quantification. Method detection limits in the buffered solutions were also evaluated. To evaluate the accuracy of the microwave oven‐DCP method a suite of eight certified coal reference materials of differing rank, were analysed with good agreement with the certified and/or available published data. Results are presented for the uncertified major oxides in the AR series reference materials.     

Transient seepage analysis in zoned anisotropic soils based on the scaled boundary finite‐element method

The scaled boundary finite‐element method, a semi‐analytical computational scheme primarily developed for dynamic stiffness of unbounded domains, is applied to the analysis of unsteady seepage flow problems. This method is based on the finite‐element technology and gains the advantages of the boundary element method as well. Only boundary of the domain is discretized, no fundamental solution is required and singularity problems can be modeled rigorously. Anisotropic and non‐homogeneous materials satisfying similarity are modeled with no additional efforts. In this study, firstly, formulation of the method for the transient seepage flow problems is derived followed by its solution procedures. The accuracy, simplicity and applicability of the method are demonstrated via four numerical examples of transient seepage flow – three of them are available in the literature. Homogenous, non‐homogenous, isotropic and anisotropic material properties are considered to show the versatility of the technique. Excellent agreement with the finite‐element method is observed. The method out‐performs the finite‐element method in modeling singularity points. Copyright © 2014 John Wiley & Sons, Ltd.