基于ArcGIS Server的服务器对象扩展方法研究

针对ArcGIS Server现有功能无法满足一些特殊业务逻辑的问题,本文对Arc GIS Server服务器扩展方法进行了研究。阐述了ArcGIS Server面向服务的底层架构,在此架构下对三种主要GIS服务器扩展方法进行对比分析,得出服务器对象扩展是最可行的方法。最后对该方法的模型结构和实现流程进行研究,并通过具体的项目实例进行说明。     

影像与激光雷达数据的城市地物信息提取

针对城市地物信息提取中地物边界难以确定、分类精度不高的问题,该文提出一套综合利用影像及激光雷达点云高程信息的面向对象分类方法。在分割中,各类地物的最佳分割尺度由监督法分割精度评价确定,最终分割结果利用粒度理论下的分割尺度综合方法进行合成,能兼顾不同地物最优分割尺度,获得准确地物边界;在分类中,采用ReliefF特征选择算法度量从影像及点云数据提取的对象特征重要度,选择最佳特征组合,并采用多分类器组合方法进行分类,以消除Hughes现象,提高分类精度。选择德国斯图加特市两块实验区进行分类实验,结果表明:该方法有利于提高大范围城市地物精细信息提取的精度和效率,具有较高的应用价值。     

支持向量机的车载雷达点云目标识别

为了进一步研究移动测量系统的数据处理问题,该文根据点云的基本特征,归纳了由7个特征构成的点云原始特征向量,在此基础上,结合语义环境构建了由17个特征构成的点云扩展特征向量,并采用支持向量机模型对车载LiDAR点云进行行道树点云识别的一系列实验。实验中采用粒子群优化算法和遗传算法对支持向量机进行参数寻优;采用不同特征向量和不同数目样本对点云进行学习和目标识别;分析了特征向量的学习曲线和识别精度。实验结果表明,支持向量机模型能够在行道树点云识别中取得较高的精度。     

混凝土灌注桩桩头渗水的处理及预防措施

混凝土灌注桩桩头渗水对桩体混凝土受力和基底防水产生影响,对混凝土结构中的钢筋造成腐蚀。结合工程实例,对桩头渗水产生的原因进行分析,主要有操作经验不足、责任心不强,灌注器具不合格,混凝土质量指标不符合要求,灌注接近结束时拔管速度过快、灌注终了超灌高度测量不准,基土含水量高、水压大等;出现桩头渗水可采用人工剔除或注浆封堵处理;介绍了预防措施,包括加强作业人员培训,强化灌注器具检查,严控混凝土质量,重点监管终灌时的状态,做好基坑内降水工作等。     

全珊瑚骨料海水混凝土力学性能试验研究

为了探讨全珊瑚骨料海水混凝土的基本力学性能,并比较其与普通混凝土和轻集料混凝土的差异,通过实验系统测定了珊瑚混凝土的基本力学性能,建立了其轴心抗压强度(f_(c,m))、劈裂抗拉强度(f_(sp,m))、抗折强度(f_(t,m))与立方体抗压强度(f_(cu,m))之间的线性关系与计算公式。结果表明:在强度等级C20~C50的范围内,珊瑚混凝土的f_(c,m)和f_(sp,m)分别比普通混凝土的f_(c,m)和f_(sp,m)高出10%~48%和9%~33%,随着强度等级的提高,两种混凝土之间的差距在减小。珊瑚混凝土的f_(t,m)与普通混凝土的ft,m之间的差异规律与强度等级有关,较低强度等级的C30珊瑚混凝土ft,m比普通混凝土的f_(t,m)要高4%,而较高强度等级的C55珊瑚混凝土f_(t,m)比普通混凝土的f_(t,m)低13%。较高强度等级的C50珊瑚混凝土f_(c,m)、f_(sp,m)和f_(t,m)分别比页岩陶粒轻集料混凝土的f_(c,m)、f_(sp,m)和f_(t,m)低11%、0.9%和4%。     

The Effect of Concrete Deformation on Displacement of an Axially Loaded Drilled Shaft

This article presents the settlement of drilled shafts resulting from their structural deformations. Although drilled shafts are widely used as foundations for settlement-sensitive structures such as bridges and high-rise buildings, the structural deformations of drilled shafts are not typically taken into account in the design process. However, if unexpected structural deformations of drilled shafts cause additional settlement to the foundation, the serviceability of the superstructure can be jeopardized. Unfortunately, very few research efforts have been made to quantify the structural deformation of drilled shafts; this needs to be addressed to accurately predict the settlement of drilled shafts. In this study, we investigate the effect of structural deformation on displacement of axially loaded drilled shafts. Finite element analyses were performed to quantify the structural deformation of drilled shafts. The analysis results indicated that the structural deformation of drilled shafts could be quite significant for long drilled shafts. The main factors that affected the structural deformation of drilled shafts were found to be pile length, the material properties of drilled shafts, and the relative humidity of surrounding soil. An approximate equation is proposed to estimate the long-term deformation of drilled shafts.     

Novel fusion approach on automatic object extraction from spatial data: case study Worldview-2 and TOPO5000

The automatic extraction of information content from remotely sensed data is always challenging. We suggest a novel fusion approach to improve the extraction of this information from mono-satellite images. A Worldview-2 (WV-2) pan-sharpened image and a 1/5000-scaled topographic vector map (TOPO5000) were used as the sample data. Firstly, the buildings and roads were manually extracted from WV-2 to point out the maximum extractable information content. Subsequently, object-based automatic extractions were performed. After achieving two-dimensional results, a normalized digital surface model (nDSM) was generated from the underlying digital aerial photos of TOPO5000, and the automatic extraction was repeated by fusion with the nDSM to include individual object heights as an additional band for classification. The contribution was tested by precision, completeness and overall quality. Novel fusion technique increased the success of automatic extraction by 7% for the number of buildings and by 23% for the length of roads.     

A geometric-based approach for road matching on multi-scale datasets using a genetic algorithm

Object matching is used in various applications including conflation, data quality assessment, updating, and multi-scale analysis. The objective of matching is to identify objects referring to the same entity. This article aims to present an optimization-based linear object-matching approach in multi-scale, multi-source datasets. By taking into account geometric criteria, the proposed approach uses real coded genetic algorithm (RCGA) and sensitivity analysis to identify corresponding objects. Moreover, in this approach, any initial dependency on empirical parameters such as buffer distance, threshold of spatial similarity degree, and weights of criteria is eliminated and, instead, the optimal values for these parameters are calculated for each dataset. Volunteered geographical information (VGI) and authoritative data with different scales and sources were used to assess the efficiency of the proposed approach. According to the results, in addition to an efficient performance in various datasets, the proposed approach was able to appropriately identify the corresponding objects in these datasets by achieving higher F-Score.     

钢筋混凝土渡槽结构地震反应数值分析

首先介绍了钢筋混凝土渡槽结构在地震荷载作用下的分析理论,根据这些理论建立了渡槽结构的动力有限元分析模型,分别采用干模态法、附加质量法和ALE法考虑渡槽结构液固耦合作用,通过具体的工程算例,对钢筋混凝土渡槽结构进行了不同工况下的数值模拟研究,包括混凝土非线性材料分析、渡槽结构静水与动水响应分析、渡槽结构自振特性分析和槽墩的能力曲线分析。研究表明,考虑固液耦合作用的渡槽实体有限元模型能较好地模拟渡槽结构地震反应,并得到相应的渡槽结构地震反应规律。     

住宅现浇钢筋混凝土楼板裂缝成因及防治

在建筑工程中,现浇钢筋混凝土楼板出现裂缝的情况较多,这已成为影响住宅工程质量的一大通病。对其产生裂缝的原因进行了分析,并结合工程实际,就预防和综合治理提出了较全面的对策。