修正的莫尔-库仑理论的解析和验证

根据主应力可分解为静水应力和偏应力,以及它们在应力莫尔圆和变形方面的相关性,推导出修正的莫尔-库仑理论的数学表达式。从理论上解决了库仑理论和莫尔理论存在的许多缺陷,特别是中间主应力对材料抗剪强度的影响。它的四参数准则的计算结果与一些混凝土的试验数据相当吻合。     

Investigations of the effects of manganese addition to Dry Creek Saltfield brines

Trials conducted at Dry Creek, a solar saltfield north of Adelaide, Australia, indicate that manganese, as manganous sulphate, can increase both the purity and strength of salt crystals grown at an ambient or neutral-slightly acid pH range resulting in a salt suitable for high purity uses. The improved load bearing strength of the crystals indicates that manganous sulphate could also be useful in salt floor maintenance. However, the impact of an apparently slight rise in pH to 8.5 was significant. Crystals produced at the higher pH from the manganese enriched brine were opaque with many tiny, almost colloidal crystals. The salt did not drain well, had low load bearing strength and was notably impure.     

冻结粉土动强度的荷载效应及长期极限动强度

荷载效应包括速率效应和疲劳效应两部分．速率效应使冻土的动强度和退荷回弹动弹模随应变速率加快而提高;疲劳效应使冻土的动强度随振频增加而下降,但在低应变速率下却使动强度略有提高．在高应变速率下动强度大于静强度,在低应变速度下动强度小于静强度,其间存在一个临界应变速率．通过动强度－破坏振次关系,可确定长期极限动强度．     

软岩的强度—变形—时间之间关系的试验分析

对软岩和有不连续面的软岩试样进行一系列固结不排水三轴压缩和蠕变试验,测定并分析了它们在正常固结和超固结状态下的应变软化性状、蠕变特性和残余强度的变化规律。探讨了软岩中存在的不连续面对应力－应变关系、残余强度特性和蠕变应变速率的影响。     

钢管高强混凝土叠合柱的抗震性能研究

通过周期性往复试验,研究了钢管高混凝土叠合柱柱的破坏形态,耗能能力、延性、承载力以及各种组成部分共同工作等内容,并与钢管高强混凝土核心柱进行了对比;随后通过计算,讨论了叠合柱中有关参数对其极限承载力和影响;最后给出了叠合柱正截面极限承载力的简化计算方法。     

直达波法测定整板基础砼强度

本文以某工程为例,介绍了直达波法测定整板基础砼强度的技术方法;其结果可避免以往回弹法测量结果离散度较大而引起的争议。     

2002年南宁不同下垫面温度及紫外线辐射强度评价

对南宁2002年沥青、水泥等不同下垫面温度观测资料和紫外线辐射强度观测资料进行分析,结果表明:沥青、水泥日最高温度均比同期气温明显偏高;南宁属紫外线高辐射地区。     

Laboratory modelling of shear behaviour of soft joints under constant normal stiffness conditions

Shear behaviour of regular sawtooth rock joints produced from casting plaster are investigated under constant normal stiffness (CNS) conditions. Test results obtained in this investigation are also compared with the constant normal load (CNL) tests. It is observed that the peak shear stress obtained under CNL conditions always underestimates the peak shear stress corresponding to the CNS condition. Plots of shear stress against normal stress show that a nonlinear (curved) strength envelope is acceptable for soft rock joints subjected to a CNS condition, in comparison with the linear or bilinear envelopes often proposed for a CNL condition. Models proposed by Patton (1966) and Barton (1973) have also been considered for the predictions of peak shear stress of soft joints under CNS conditions. Although Patton's model is appropriate for low asperity angles, it overestimates the shear strength in the low to medium normal stress range at higher asperity angles. In contrast, while Barton's model is realistic for the CNL condition, it seems to be inappropriate for modelling the shear behaviour of soft joints under CNS conditions. The effect of infill material on the shear behaviour of the model joints is also investigated, and it is found that a small thickness of bentonite infill reduces the peak stress significantly. The peak shear stress almost approached that of the shear strength of infill when the infill thickness to asperity height ratio (t/a) reached 1.40. This paper also introduces an original, empirical shear strength envelope to account for the change in normal stress and surface degradation during CNS shearing. © Rapid Science Ltd. 1998     

Estimation of Axial Pile Bearing Capacity According to Shear Strength Parameters of Soil

At pesent,it is very popular to estimate pile bearing capacity by use of empirical formula andphysical indexes of soil provided in the design codes for civil construction in China.This paper attempts toapply mechanical indexes of soil and semi-empirical formulas,which are based on soil mechanical theoriesand were summarized and presented by Meyerhof in 1976,to calculate the axial pile bearing capacity.Lo-ading test results of 24 single piles in Tianjin area have been collected and compared with the proposed cal-ulation approach.