Principal axes of m-DOF structures PartⅠ:Static loading

This paper is the first in a two-part series that discusses the principal axes of M-DOF structures subjected to static and dynamic loads. The primary purpose of this series is to understand the magnitude of the dynamic response of structures to enable better design of structures and control modification devices/systems. Under idealized design conditions, the structural responses are obtained by using single direction input ground motions in the direction of the intended control devices/systems,and by assuming that the responses of the structure is decoupleable in three mutually perpendicular directions. This standard practice has been applied to both new and retrofitted structures using various seismic protective systems. Very limited information is available on the effects of neglecting the impact of directional couplings (cross effects - of which torsion is a component) of the dynamic response of structures. In order to quantify such effects, it is necessary to examine the principal axes of structures under both static and dynamic loading.This first paper deals with quantitative definitions of principal axes and "cross effects" of three-dimensional structures under static load by using linear algebra. It shows theoretically that, for three-dimensional structures, such principal axes rarely exist. Under static loading conditions, the cross effect is typically small and negligible from the viewpoint of engineering applications. However, it provides the theoretical base for subsequent quantification of the response couplings under dynamic loads, which is reported in part Ⅱ of this series.     

Study on dynamics of tectonic evolution in the Fushun Basin, Northeast China

The updated study shows that the taphrogenesis of basement of the Fushun Basin is not a kind of instantaneous process. It intensified gradually and went to extreme in the sedimentary stage of the Guchengzi formation, and then, it weakened rapidly and stopped soon afterwards; the depression did not take place after the taphrogenesis. On the contrary, it almost happened simultaneously with the taphrogenesis. The depression went at a high speed from the beginning of the sedimentary period of the Xilutian formation, and then weakened gradually in the sedimentary period of the Gengjiajie formation. The evolution course of the synsedimentary structure of the Fushun Basin can be summarized as the following six stages: slow taphrogenesis and high speed depression to accelerated taphrogenesis and high speed depression to high speed taphrogenesis and high speed depression to retarded taphrogenesis and high speed depression to gradual halt of taphrogenesis and reduced depression to slow depression and gradual halt of depression. The tectonic evolution resulted in the formation of the "lower taphrogenesis and upper depression" structure. The formation of the binary structure might be due to the suspension of taphrogenesis and the change of the regional structure stress field, but the depression kept going. The result of calculation combining the analysis of the synsedimentary structural frame, the back-stripping method of the subsidence history of the basin basement and the simulation of thermo-settlement history indicates that the great sedimentary space required by the "upper depression part" consists of two parts, namely, 40% from compaction of sediments and 60% from slow depression of the basin basement during a long period of time. Gradual halt of the depression in the Fushun Basin may be attributed to the reversal of the lithosphere hot-recession and gravity isostasy adjustment which may be the result of new hot-events in the depths and accompanied invasion of extremely thick diabase sill, thus revealing a new forming mechanism of "fault subsidence at the base and depression on the top" structure.     

To afforest the desert with the technology of peat composed of rotten mosses and the sustainable development of the oases

Only by providing the good conditions for the growth of plants can a favorable ecologicalenvironment on which human beings rely for existence be created. The upside-down-T dou-ble-layer water-conserving afforestation way is developed according to the situation of the short-age of water resources, low soil fertility and vast land in the arid areas. The characteristics of theafforestation way are to change the microenvironment in the root area of the plants, provide thefavorable conditions for the growth of plants, and reduce the necessary conditions for the growth ofplants in large areas in the arid regions. Meanwhile, the size of its water-conserving layer can bechanged according to the size of the planted trees. The different ways of the bottom wa-ter-conserving layer can be used according to the requirements. The afforestation way is suitablefor planting trees on a small scale and also for afforesting on a large scale under the adverse cir-cumstances in the arid areas, and has been effectively used in the afforestation in the hinterland ofTaklamakan Desert and the southern marginal zone of Gurbantonggut Desert. The prospects ofthe afforestation way are broad in afforestation and desertification control in the desert regions.     

The El Salvador earthquakes of January and February 2001: context, characteristics and implications for seismic risk

The small Central American republic of El Salvador has experienced, on average, one destructive earthquake per decade during the last hundred years. The latest events occurred on 13 January and 13 February 2001, with magnitudes M_w 7.7 and 6.6, respectively. The two events, which were of different tectonic origin, follow the patterns of the seismicity of the region although neither event has a known precedent in the earthquake catalogue in terms of size and location. The earthquakes caused damage to thousands of traditionally built houses and triggered hundreds of landslides, which were the main causes of fatalities. The earthquakes have clearly demonstrated trends of increasing seismic risk in El Salvador due to rapid population expansion in areas of high shaking and landslide hazard, exacerbated by deforestation and uncontrolled urbanisation. The institutional mechanisms required for the control of land use and building practice are very weak and present a major obstacle to risk mitigation.     

A methodology for the evaluation of long-term volcanic risk from pyroclastic flows in Campi Flegrei (Italy)

The volcanological history of Campi Flegrei suggests that the most frequent eruptions are characterized by the emplacement of pyroclastic flow and surge deposits erupted from different vents scattered over a 150-km² caldera. The evaluation of volcanic risk in volcanic fields is complex because of the lack of a central vent. To approach this problem, we subdivided the entire area of Campi Flegrei into a regular grid and evaluated the relative spatial probability of opening of vents based on geological, geophysical and geochemical data. We evaluated the volcanic risk caused by pyroclastic flows based on the formula proposed by UNESCO (1972), R=H×V×Va, where H is the hazard, V is the vulnerability and Va is the value of the elements at risk. The product H×V was obtained by performing simulations of type eruptions centered in each cell of the grid. The simulation is based on the energy cone scheme proposed by Sheridan and Malin [J. Volcanol. Geotherm. Res. 17 (1983) 187–202], hypothesizing a column collapse height of 100 m for eruptions of VEI=3 and 300 m for eruptions of VEI=4 with a slope angle of 6°. Each simulation has been given the relative probability value associated with the corresponding cell. We made use of the GIS software ArcView 3.2 to evaluate the intersection between the energy cone and the topography. The superposition of the areas invaded by pyroclastic flows (124 simulations for VEI=3 and 37 for VEI=4) was used to obtain the relative hazard map of the area. The relative volcanic risk map is obtained by superimposing the urbanization maps.     

桥梁隔震体系振动台试验研究(III)——测试结果分析

根据前文所述的测试结果 ,本文主要分析了隔震构造、橡胶支座水平刚度、地震输入频谱特性、地震烈度、输入方向、桥墩高度、桥墩嵌固程度等因素对隔震效果的影响 ,揭示了隔震体系耗散地震能量输入的机理 ,所得出的结论对工程实践具有指导意义。     

Cretaceous length of day perturbation by mantle avalanche

These last 10 years, numerical models of mantle convection have emphasized the role of the 670 km endothermic phase change in generating avalanches that trigger catastrophic mass transfers between upper and lower mantle. On the other hand, scientists have emphasized the concomitance of large-scale worldwide geophysical and tectonic events, which could find their deep thermal roots in the huge mass transfers induced by the avalanches. In particular, the paleontological records show two periods of length of day (l.o.d.) shortening between 420 and 360, and 200 and 80 Myr BP. This last event is synchronous with a strong true polar wander and a global warming of the upper mantle. In order to study the potential effects of the avalanche on the main component of the Earth’s rotation, the Liouville equation has been solved and the l.o.d. evolution has been calculated from the perturbations of the inertia tensor. The results show that the inertia tensor of the Earth’s is mainly sensitive to the global transfers through the 670 km discontinuity. The l.o.d. perturbations will be synchronous with the global thermal effects of the avalanche. These theoretical results allow proposing a self-consistent physical mechanism to explain periods of the Earth’s rotation acceleration. Within this context, the l.o.d. shortening during the Cenozoic and Cretaceous brings one more clue to the possible participation of a mantle avalanche in generating the concomitant large scale events which have occurred during this very particular period of the Earth’s history.     

Most likely locations of large earthquakes in the Kanto and Tokai areas, Japan, based on the local recurrence times

We examined the hypothesis that minima in local recurrence time, T_L, or equivalently maxima in local probability, P_L, may map asperities in the Kanto and Tokai areas of Japan, where the earthquake catalog of the National Research Institute for Earth Science and Disaster Prevention (NIED) is complete at the M=1.5 (M1.5) level. We mapped T_L (P_L) based on the a- and b-values of the nearest earthquakes within 20 km of every node of a grid spaced 0.01° for M7 target events. Only earthquakes within the top 33 km were used. The b-values increase strongly with depth, in several areas. Therefore, some of the T_L (P_L) anomalies are not revealed if data from the entire crustal seismogenic zone are mixed. Thus, we mapped T_L (P_L) separately for the top 15 km and the rest of the depth range, as well as for the entire seismogenic crust. The resulting T_L- and P_L-maps show that approximately 12% of the total area shows anomalously short recurrence times. Out of six shallow target events with M≥6.5 and which occurred since 1890, five are located within the anomalous areas with T_L <450 years. We interpret this to mean that areas with anomalously short T_L map asperities, which are more likely than other areas to generate future target events. The probability that this result is due to chance is vanishingly small. The great Kanto rupture of 1923 appears to have initiated in the most significant asperity we mapped in the study area. One anomaly is located in the northeastern part of the area of the proposed future rupture of the Tokai earthquake, and another one at its southwestern corner. The absolute values of T_L calculated are uncertain because they depend on the size of the volume used for the calculation.     

Simulation of individual particle movement in a gravel streambed

A two‐dimensional simulation model of travel distances of individual particles in a gravel‐bed river is presented. The model is based on a number of rules, which include particle size, entrainment, trajectory, distance of movement and entrapment. Particle interactions are controlled by resistance fields defined about each obstacle and critical elevation defined in the model. Resistance fields, particle dropping and critical elevation rules control particle interactions. The interaction rules cause the particles to develop pebble clusters, stone cells and transverse structures (transverse ribs). The simulated travel distances of individual particles are consistent with reported field results. Individual particle travel distances were simulated using two different models; one without interactions between the individual particles and the stationary bed and one with interactions. The case without interactions demonstrates the random nature of sediment transport, and narrow ranges of travel distances. Wider ranges of travel distances, similar to those for natural situations, were obtained for the cases with interactions. The more intense the interaction between the mobile stones and the stationary ones, the wider the range of distances of travel for a given particle size. Modelling the mean travel distance yielded a result similar to that published previously, which was based on empirical data. Well developed bed‐surface structures were obtained for relatively poorly sorted sediment with intense interactions between particles. Transverse structures developed when relatively large particles were allowed to move. Copyright © 2002 John Wiley & Sons, Ltd.     

弹性反射波频谱分析对比法检测浆砌片石挡墙质量

大量的浆砌片石挡墙需要作快速质量检测，作者比较了利用弹性波速、瑞利面波和弹性波频谱分析法后，认为后者分辨率高，方法简单，并作了几百个点的检测，得到了成功。