Application of the QUILF thermobarometer to the peralkaline trachytes and pantellerites of the Eburru volcanic complex, East African Rift, Kenya

The Quaternary Eburru volcanic complex in the south-central Kenya Rift consists of pantelleritic trachytes and pantellerites. The phenocryst assemblage in the trachytes is sanidine + fayalite + ferrohedenbergite + aenigmatite ± quartz ± ilmenite ± magnetite ± pyrrhotite ± pyrite. In the pantellerites, the assemblage is sanidine + quartz + ferrohedenbergite + fayalite + aenigmatite + ferrorichterite + pyrrhotite ± apatite, although fayalite, ferrohedenbergite and ilmenite are absent from more evolved rocks (e.g. with SiO₂ > 71%). QUILF temperature calculations for the trachytes range from 709 to 793 °C and for the pantellerites 668–708 °C, the latter temperatures being among the lowest recorded for peralkaline silicic magmas. The QUILF thermobarometer demonstrates that the Eburru magmas crystallized at relatively low oxidation states (ΔFMQ + 0.5 to − 1.6) for both trachytes and pantellerites. The trachytes and pantellerites evolved along separate liquid lines of descent, the trachytes possibly deriving from a more mafic parent by fractional crystallization and the pantellerites from extreme fractionation of comenditic magmas.     

Modeling the seismic response of basin-edge structure by a sequential waveform method

A sequential waveform method is developed to simulate the seismic response of basin-edge structure excited by a plane incident P-wave. The full procedure involves: (a) a previous parameterization of the investigated model using the seismic wave velocities and depths of the sedimentary stratifications; (b) an input motion determined from the records at stations installed on hard rock; (c) forward computation of the P-SV elastic wave field by means of a two-dimensional finite difference (FD) method; (d) the optimization of the model vector using simulated annealing technique and comparing the simulated seismic response of the tested structure with the observed wave field; (e) the correction of the initial model by trial-and-error by testing the differences between synthetics and observed data, and (f) the final solution obtained by iteration using the conjugate gradient algorithm. The search of an optimal basin-edge model has been parallel processed by varying the shapes and velocities of strata on the basis of the fitting of relative timing, amplitude and phase between the output and the observed data. The input motion and sensitivity have been checked and the validity of the method has been demonstrated by numeric analysis. Using the teleseismic records generated by 7 earthquakes recorded at 26 broadband seismic stations, we have studied the seismic velocity structure of the southern edge of the Jiyang depression located in the Bohai Bay basin, northern China. Two cross sections show an agreement between the velocity results and the geological sections available in the region. In addition, we obtain evidence of three hidden faults under the sections and features that suggest major extensions at the Paleogene.     

On the Importance of Geolithological Features for the Estimate of the Site Response: The Case of Catania Metropolitan Area (Italy)

The evaluation of seismic site response in the urban area of Catania was tackled by selecting test areas having peculiar lithological and structural features, potentially favourable to large local amplifications of ground motion. The two selected areas are located in the historical downtown and in the northern part of Catania where the presence of a fault is evident. Site response was evaluated using spectral ratio technique taking the horizontal- to-vertical component ratio of ambient noise. Inferences from microtremor measurements are compared with results from synthetic accelerograms and response spectra computed at all drillings available for this area. Such method is particularly suitable in urban areas where the nature of the outcropping geological units is masked by city growth and anthropic intervention on the surface geology. The microtremor H/V spectral ratios evaluated at soft sites located within the downtown profile tend to be smaller than that usually reported in the literature for such soils. A tendency for amplifications to peaks near 2 Hz is observed only in some sites located on recent alluvial deposits. Evidences for amplifications of site effects (frequency range 4–8 Hz) were observed in the sampling sites located on the fault, with a rapid decrease of spectral amplitude just a few tenths of metres away from the discontinuity. Numerical simulations evidenced the importance of geolithological features at depth levels even greater than 20–30 m. Besides this, the results strongly confirm the importance of the subsurface geological conditions, in the estimate of seismic hazard at urban scale.     

Poverty, vulnerability and the impact of flooding in the Limpopo Province, South Africa

The article evaluates household vulnerability after the 2000 flood in two poor communities of the Limpopo Province, South Africa. The study analyses the forms of vulnerability which disasters such as floods present. Using data gathered from a survey of households, the study presents the impacts, coping and adapting strategies of households after the 2000 flood. The article argues that beyond the concern over socio-economic circumstances as the major determinant of household vulnerability, the management of the disaster can serve to perpetuate vulnerability.     

Lead, zinc, and antimony contamination of the Rio Chilco-Rio Tupiza drainage system, Southern Bolivia

An intense, but localized rainfall event in February 2003, led to the severe erosion and failure of a tailings disposal impoundment at the Abarόa Antimony Mine in southern Bolivia. The failure released approximately 5,500 m³ of contaminated tailings into the Rio Chilco-Rio Tupiza drainage system. The impacts of the event on sediment quality are examined and compared to contamination resulting from historic mining operations in the headwaters of the basin. Of primary concern are contaminated floodplain soils located along downstream reaches of the Rio Tupiza which were found to contain lead (Pb), zinc (Zn), and antimony (Sb) concentrations that locally exceed Canadian, German, and Dutch guidelines for agricultural use. Spatial patterns in sediment-borne trace metal concentrations, combined with Pb isotopic data, indicate that Pb, Zn, and Sb are derived from three tributary basins draining the Abarόa, Chilcobija, and Tatasi-Portugalete mining districts. Downstream of each tributary, geographical patterns in trace metal concentrations reflect local geomorphic changes throughout the drainage system. Trace metal concentrations within the Rio Chilco decrease rapidly downstream as a result of dilution by uncontaminated sediments and storage of metal enriched particles (e.g., sulfide minerals) in the channel bed as a result of ongoing aggradation. Storage in the floodplains is limited. These processes significantly reduced the dispersal and, thus, the relative environmental affects of tailings eroded from the Abarόa Mine during the 2003 flood. In contrast, storage of Pb, Zn, and Sb in floodplains along the Rio Tupiza is significant, the majority of which is derived from historic mining operations, particularly mining within the Tatasi-Portugalete district.     

Fast computation of Hankel Transform using orthonormal exponential approximation of complex kernel function

The computation of electromagnetic (EM) fields, for 1-D layered earth model, requires evaluation of Hankel Transform (HT) of the EM kernel function. The digital filtering is the most widely used technique to evaluate HT integrals. However, it has some obvious shortcomings. We present an alternative scheme, based on an orthonormal exponential approximation of the kernel function, for evaluating HT integrals. This approximation of the kernel function was chosen because the analytical solution of HT of an exponential function is readily available in literature. This expansion reduces the integral to a simple algebraic sum. The implementation of such a scheme requires that the weights and the exponents of the exponential function be estimated. The exponents were estimated through a guided search algorithm while the weights were obtained using Marquardt matrix inversion method. The algorithm was tested on analytical HT pairs available in literature. The results are compared with those obtained using the digital filtering technique with Anderson filters. The field curves for four types (A-, K-, H-and Q-type) of 3-layer earth models are generated using the present scheme and compared with the corresponding curves obtained using the Anderson sc heme. It is concluded that the present scheme is more accurate than the Anderson scheme     

Petrology, geochemistry and the mechanisms determining the distribution of platinum-group element and base metal sulphide mineralisation in the Platreef at Overysel, northern Bushveld Complex, South Africa

Platinum-group element (PGE) mineralisation within the Platreef at Overysel is controlled by the presence of base metal sulphides (BMS). The floor rocks at Overysel are Archean basement gneisses, and unlike other localities along the strike of the Platreef where the floor is comprised of Transvaal Supergroup sediments, the intimate PGE–BMS relationship holds strong into the footwall rocks. Decoupling of PGE from BMS is rare and the BMS and platinum-group mineral assemblages in the Platreef and the footwall are almost identical. There is minimal overprinting by hydrothermal fluids; therefore, the mineralisation style present at Overysel may represent the most ‘primary’ style of Platreef mineralisation preserved anywhere along the strike. Chondrite-normalised PGE profiles reveal a progressive fractionation of the PGE with depth into the footwall, with Ir, Ru and Rh dramatically depleted with depth compared to Pt, Pd and Au. This feature is not observed at Sandsloot and Zwartfontein, to the south of Overysel, where the footwall rocks are carbonates. There is evidence from rare earth element abundances and the amount of interstitial quartz towards the base of the Platreef pyroxenites that contamination by a felsic melt derived from partial melting of the gneissic footwall has taken place. Textural evidence in the gneisses suggests that a sulphide liquid percolated down into the footwall through a permeable, inter-granular network that was produced by partial melting around grain boundaries in the gneisses that was induced by the intrusion of the Platreef magma. PGE were originally concentrated within a sulphide liquid in the Platreef magma, and the crystallisation of monosulphide solid solution from the sulphide liquid removed the majority of the IPGE and Rh from it whilst still within the mafic Platreef. Transport of PGE into the gneisses, via downward migration of the residual sulphide liquid, fractionated out the remaining IPGE and Rh in the upper parts of the gneisses leaving a ‘slick’ of disseminated sulphides in the gneiss, with the residual liquid becoming progressively more depleted in these elements relative to Pt, Pd and Au. Highly sulphide-rich zones with massive sulphides formed where ponding of the sulphide liquid occurred due to permeability contrasts in the footwall. This study highlights the fact that there is a fundamental floor rock control on the mechanism of distribution of PGE from the Platreef into the footwall rocks. Where the floor rocks are sediments, fluid activity related to metamorphism, assimilation and later serpentinisation has decoupled PGE from BMS in places, and transport of PGE into the footwall is via hydrothermal fluids. In contrast, where the floor is comprised of anhydrous gneiss, such as at Overysel, there is limited fluid activity and PGE behaviour is controlled by the behaviour of sulphide liquids, producing an intimate PGE–BMS association. Xenoliths and irregular bands of chromitite within the Platreef are described in detail for the first time. These are rich in the IPGE and Rh, and evidence from laurite inclusions indicates they must have crystallised from a PGE-saturated magma. The disturbed and xenolithic nature of the chromitites would suggest they are rip-up clasts, either disturbed by later pulses of Platreef magma in a multi-phase emplacement or transported into the Platreef from a pre-existing source in a deeper staging chamber or conduit.     

Centrifuge modelling-based verification of response spectra design methods for some vulnerable structures

Residential RC framed structures suffered heavily during the 2001 Bhuj earthquake in Gujarat, India. These types of structures also saw severe damage in other earthquakes such as the 1999 Kocaeli earthquake in Turkey and 921 Ji-Ji earthquake in Taiwan. In this paper the seismic response of residential structures was investigated using physical modelling. Idealised soft storey and top heavy, two degrees of freedom (2DOF) portal frame structures were developed and tested on saturated and dry sand models at 25 g using the Schofield Centre 10-m Beam Centrifuge. It was possible to recreate observed field behaviour using these models. As observed in many of the recent earthquakes, soft storey structures were found to be particularly vulnerable to seismic loads. Elastic response spectra methods are often used in the design of simple portal frame structures. The seismic risk of these structures can be significantly increased due to modifications such as removal of a column or addition of heavy water tanks on the roof. The experimental data from the dynamic centrifuge tests on such soft storey or top-heavy models was used to evaluate the predictions obtained from the response spectra. Response spectra were able to predict seismic response during small to moderate intensity earthquakes, but became inaccurate during strong earthquakes and when soil structure interaction effects became important. Re-evaluation of seismic risk of such modified structures is required and time domain analyses suggested by building codes such as IBC, UBC or NEHRP may be more appropriate.     

Early Estimation of Seismic Hazard for Strong Earthquakes in Taiwan

A shakemap system providing rapid estimates of strong ground shaking could be useful for emergency response providers in a damaging earthquake. A hybrid procedure, which combines site-dependent ground motion prediction models and the limited observations of the Real-Time Digital stream output system (RTD system operated by Central Weather Bureau, CWB), was set up to provide a high-resolution shakemap in a near-real-time manner after damaging earthquakes in Taiwan. One of the main factors that affect the result of ground motion prediction analysis is the existence of site effects. The purpose of this paper is to investigate the local site effects and their influence in the ground shaking and then establish an early estimation procedure of potential hazard for damaging earthquakes. Based on the attenuation law, the site effects of each TSMIP station are discussed in terms of a bias function that is site and intensity-level dependent function. The standard deviation of the site-dependent ground motion prediction model can be significantly reduced. The nonlinear behavior of ground soil is automatically taken into account in the intensity-level dependent bias function. Both the PGA and the spectral acceleration are studied in this study. Based on the RTD data, event correctors are calculated and applied to precisely estimate the shakemap of damaging earthquakes for emergency response.     

The chromite deposits associated with ophiolite complexes, Southeastern Desert, Egypt： Petrological and geochemical characteristics and mineralization

1 Introduction The association of massive Fe-Ni-Cu sulfides andchromite is a very unusual feature of podiformchromitites occurring in mantle tectonites of ophioliticcomplexes. It has only been described in theSoutheastern Desert, Egypt, where sulfides a…