嵌入式GIS的三维地形显示算法研究

本文论述了基于嵌入式G IS的三维地形显示的一系列理论和算法。首先介绍了三维地形显示的基本算法步骤,接下来针对嵌入式系统的特点,提出了三个改进方面,分别是递归细分、坐标变换和内存调度。在论文的最后,给出了实验结果并进行了总结。     

一种嵌入式空间数据引擎的设计与实现

空间数据引擎是实现高效空间数据访问和管理的关键技术之一。本文提出一种基于内存映射文件和改进堆组织表方式的嵌入式空间数据引擎设计与实现方法,分析了该数据引擎的组成部分和关键算法,并在其基础上讨论了日志及事务的实现方法。通过对实际数据的实验对比,其结果表明:基于本文方法开发的系统和目前主流嵌入式数据库相比,具有数据访问速度快,占用内存少的特点,适合于空间数据的编辑环境。     

GRP文件格式到MIF格式的实现

为将ＧＲＰ文件格式转换成ＭＩＦ文件格式，提供一种数据不变，而文件存储方式改变的数据转换方法和实例。     

Computational study of self‐centering buckling‐restrained braced frame seismic performance

Recent research developed and experimentally validated a self‐centering buckling‐restrained brace (SC‐BRB) that employs a restoring mechanism created using concentric tubes held flush with pretensioned shape memory alloy rods, in conjunction with a buckling‐restrained brace (BRB) that dissipates seismic energy. The present computational study investigated how the SC‐BRB can be implemented in real buildings to improve seismic performance. First, a computational brace model was developed and calibrated against experimental data, including the definition of a new cyclic material model for superelastic NiTi shape memory alloy. A parametric study were then conducted to explore the design space for SC‐BRBs. Finally, a set of prototype buildings was designed and computationally subjected to a suite of ground motions. The effect of the lateral resistance of gravity framing on self‐centering was also examined. From the component study, the SC‐BRB was found to dissipate sufficient energy even with large self‐centering ratios (as large as 4) based on criteria found in the literature for limiting peak drifts. From the prototype building study, a SC‐BRB self‐centering ratio of 0.5 was capable of reliably limiting residual drifts to negligible values, which is consistent with a dynamic form of self‐centering discussed in the literature. Because large self‐centering ratios can create significant overstrength, the most efficient SC‐BRB frame designs had a self‐centering ratio in the range of 0.5–1.5. Ambient building resistance (e.g., gravity framing) was found to reduce peak drifts, but had a negligible effect on residual drifts. Copyright © 2014 John Wiley & Sons, Ltd.     

Shaking‐table tests on reinforced concrete frames with different isolation systems

The effectiveness of seismic isolation in protecting structural and non‐structural elements from damage has been assessed in an extensive programme of shaking‐table tests, carried out on four identical 1/3.3‐scale, two‐dimensional, reinforced concrete (R/C) frames. Four different isolation systems were considered, namely: (i) rubber‐based, (ii) steel‐based, (iii) shape memory alloy (SMA)‐based and (iv) hybrid, i.e. based on both SMA and steel components, isolation systems. This paper presents a comprehensive overview of the main results of the experimental tests on base‐isolated models, whose structural response is described through: (i) maximum base displacements; (ii) maximum interstorey drifts; (iii) maximum storey accelerations and (iv) maximum storey shear forces. The evolution of the fundamental frequency of vibration of the R/C frame during the tests is also described. The beneficial effects of using base isolation resulted in no or slight damage, under strong earthquakes, to both structural and non‐structural members, as well as to the internal content of the building. The comparison with the experimental results obtained in shaking‐table tests on similar fixed‐base models emphasizes these positive aspects. Finally, advantages and drawbacks related to the use of each isolation system are discussed in the paper. Copyright © 2006 John Wiley & Sons, Ltd.     

Performance of a base isolator with shape memory alloy bars

A new and innovative base isolation device is introduced in this paper based on extensive research carried out by the authors and their co-workers. A prototype of the device was built and experimentally tested on the shaking table. The new base isolation device consists of two disks, one vertical cylinder with an upper enlargement sustained by three horizontal cantilevers, and at least three inclined shape memory alloy (SMA) bars. The role of the SMA bars is to limit the relative motion between the base and the superstructure, to dissipate energy by their super-elastic constitutive law and to guarantee the re-centring of the device. To verify the expected performance, a prototype was built and tested under sinusoidal waves of displacement of increasing frequency with different amplitudes. It is shown that the main feature of the proposed base isolation device is that for cyclic loading, the super-elastic behavior of the alloy results in wide load-displacement loops, where a large amount of energy is dissipated.     

Comparative response analysis of conventional and innovative seismic protection strategies

The paper presents a numerical investigation aimed at evaluating the improvements achievable through devices for passive seismic protection of buildings based on the use of shape memory alloys (SMA) in place of conventional steel or rubber devices. To get some generality in the results, different resisting reinforced concrete plane frames were analysed, either protected or not. ‘New’ and ‘existing’ buildings were considered depending on whether seismic provisions are adopted in the building design or not. Base isolation and energy dissipation were equally addressed for both conventional and innovative SMA‐based devices. Fragility analyses were performed using specific damage measures to account for comparisons among different damage types; the results were then used to estimate quantitatively the effectiveness of the various protection systems. More specifically, the assessment involved a direct comparison of the damage reduction provided by each protection system with respect to the severe degradation experienced by the corresponding non‐protected frame. Structural damage, non‐structural damage and damage to contents were used on purpose and included in a subsequent phase of cost analysis to evaluate the expected gains also in terms of economic benefits and life loss prevention. The results indicate that base isolation, when applicable, provides higher degrees of safety than energy dissipation does; moreover, the use of SMA‐based devices generally brings about better performances, also in consideration of the reduced functional and maintenance requirements. Copyright © 2002 John Wiley & Sons, Ltd.     

用褶积滤波处理井水位对固体潮响应的滞后

本文给出了一种用褶积滤波处理井水位对固体潮响应滞后的新方法。鲁07井水位观测资料用这种方法处理比一般回归方法的平均中误差少4.6mm。文中讨论了褶积滤波积分区间长度与水井含水层渗透系数的关系及褶积滤波比别尔采夫滤波的优越性。     

SMA复合摩擦阻尼器性能的试验研究

利用形状记忆合金(SMA)的超弹性效应及高阻尼性能,结合传统Pall摩擦型阻尼器的特点,提出了一种SMA复合摩擦阻尼器。在建立阻尼器力学分析模型的基础上,对SMA复合摩擦阻尼器的性能进行了试验研究,分析了位移幅值、加载频率等对阻尼器的等效刚度、单位循环耗能和等效阻尼比的影响,并与理论分析结果进行了对比。研究表明,SMA复合摩擦阻尼器在加卸载循环下会形成比较稳定的滞回曲线,表明这种阻尼器具有良好的耗能能力。     

遥测地震台网实时处理系统

本文介绍了采用程序驻留内存技术，利用系统的硬件中断和时钟中断，在微机上研制成功了实时处理系统。该系统具有前后台处理功能，能够在主机ＣＰＵ中同时运行多道程序，使数据采集、事件检测、数据转存、地震定位等均能进行实时处理。该系统可用于区域遥测地震台网和地方遥测地震台网的实时处理。