Flow in an aquifer charged with hot water from a fault zone

Many geothermal anomalies are intersected by vertical fault zones (narrow zones of fractured material with large effective permeability). These conduits are probably responsible for much of the upwelling of hot water from depth. This paper considers a shallow aquifer intersected by a vertical fault. The fluid flow in the aquifer is numerically modeled as a two-dimensional problem. It is observed that the temperature distribution in the aquifer is governed primarily by lateral flow of hot water supplied from the intersecting vertical fault and only secondarily by conduction. The numerical results also provide a possible explanation for the local temperature maxima and inversions occasionally observed in borehole measurements. The present model is an alternative to that based on mushroom-shaped isotherm distributions found in high Rayleigh number large-scale circulation cell calculations.     

Heat flow in Italy

More than fifty heat flow measurements in Italy are examined. The values, corrected only for local influences (when present), are related to the main geological features with the following results: foreland areas, 55±19 mW m^–2, foredeep areas, 45±21 mW m^–2; folded regions and intermountain depressions, 76±29 mW m^–2. In volcanic areas the heat flow rises to in excess of 600 mW m^–2. From a tectonic point of view, these values are consistent with the hypothesis that the Apennine chain is intersected by two arcuate structures: the first from Liguria to Latium is very probably a continental arc, that is an are which occurs within a continent, and the second from Campania to Calabria is very similar from geophysical evidence to the classic island arcs.     

Drainage density changes during rainfall

Observations of stream behaviour during rainfall indicate that previous notions of a simple expanding and contracting network need review and refinement. In a small rural catchment near Armidale, N.S.W. changes in flowing stream length during rainfall have been depicted on flow length graphs which indicate a varied network response to similar rainfall amounts. Channel flow phenomena include discontinuous flow, the generation of flow points within the channel and movement of water downslope from saturated depression sources. Localized physical controls have a significant effect on stream growth which is a sensitive indicator of the catchment response to rainfall. During rapid changes in stream length total flowing length and discharge are highly correlated. A model of the pattern of network expansion and contraction involves several phases of flow contraction.     

Simulation of flow geometry in a riffle-pool stream

The nature of the flow in most natural streams is gradually varied rather than uniform. This is particularly true of streams with coarse gravel bed material organized into relatively stable riffle and pool features. In spite of this, there are few applications of the gradually varied flow models (e.g. the Bernoulli equation) to such streams. This paper presents some initial results of a simulation of flow patterns in two riffle-pool reaches, using an open channel flow profile computation method based on an equation defining an energy balance between successive cross-sections separated by an incremental distance.     

Effects of large organic material on channel form and fluvial processes

Stream channel development in forested areas is profoundly influenced by large organic debris (logs, limbs and rootwads greater than 10 cm in diameter) in the channels. In low gradient meandering streams large organic debris enters the channel through bank erosion, mass wasting, blowdown, and collapse of trees due to ice loading. In small streams large organic debris may locally influence channel morphology and sediment transport processes because the stream may not have the competency to redistribute the debris. In larger streams flowing water may move large organic debris, concentrating it into distinct accumulations (debris jams). Organic debris may greatly affect channel form and process by: increasing or decreasing stability of stream banks; influencing development of midchannel bars and short braided reaches; and facilitating, with other favourable circumstances, development of meander cutoffs. In steep gradient mountain streams organic debris may enter the channel by all the processes mentioned for low gradient streams. In addition, considerable debris may also enter the channel by way of debris avalanches or debris torrents. In small to intermediate size mountain streams with steep valley walls and little or no floodplain or flat valley floor, the effects of large organic debris on the fluvial processes and channel form may be very significant. Debris jams may locally accelerate or retard channel bed and bank erosion and/or deposition; create sites for significant sediment storage; and produce a stepped channel profile, herein referred to as ‘organic stepping’, which provides for variable channel morphology and flow conditions. The effect of live or dead trees anchored by rootwads into the stream bank may not only greatly retard bank erosion but also influence channel width and the development of small scour holes along the channel beneath tree roots. Once trees fall into the stream, their influence on the channel form and process may be quite different than when they were defending the banks, and, depending on the size of the debris, size of the stream, and many other factors, their effects range from insignificant to very important.     

Erosion and deposition by debris flows at Mt Thomas,North Canterbury,New Zealand

The grass-covered slopes on the southern flank of Mt Thomas, an upfaulted block of highly sheared sandstone and argillite 40 km NW of Christchurch, New Zealand, are presently undergoing severe erosion by a combination of mass-wasting processes. Gully erosion, soil slips, and debris flows have carved out a number of steep, deeply incised ravines, from which coarse debris is transported (primarily by debris flows) to alluvial fans below. Geologic and historical evidence indicates that debris flows have been episodically active here for at least the last 20,000 years and have been the dominant process in fan building. This demonstrates that catastrophic geomorphic processes, rather than processes acting at relatively uniform rates, can be dominant in humid-temperate areas as well as in arid and semi-arid regions. In April 1978, debris flows were triggered in one of two unstable ravines in the Bullock Creek catchment by a moderate intensity, long duration rainstorm with a return period in excess of 20 years. Surges of fluid debris, moving at velocities up to 5 m/s, transported a dense slurry of gravel, sand, and mud up to 3·5 km over a vertical fall of 600 m. Deposition on the alluvial fan occurred when the flows left the confines of an entrenched fan-head channel and spread out as a 0·16 km² sheet averaging 1·2 m thick. In all, 195,000 m³ were deposited, roughly a third of that being reworked sediments from the head of the fan. Sediment yield from this one event would be equivalent to several thousand years worth of erosion at average sediment discharge rates for small South Island mountain catchments. Samples of viscous fluid debris during surges contained up to 84 per cent solids, composed of 70 per cent gravel, 20 per cent silt, and 4 per cent clay. Fluid density of the material ranged between 1·95 and 2·13 g/cm³, and it was extremely poorly sorted. Between surges the fluid was less viscous, less dense, and unable to carry gravel in suspension. Severe fan-head entrenchment of the stream channel (approximately 10 m in less than 24 hours) was accomplished by the erosive action of the surges. Tectonic uplift of the Mt Thomas block and the weak, crushed condition of the bedrock appear to be ultimately responsible for the catastropic erosion of slopes in the Bullock Creek catchment. However, forest clearing within the last few centuries appears to have greatly increased the rate of mass wasting and gully erosion on these slopes.     

造成山东不同天气的两个西南低涡异同分析

１９９６年６月２８－２９日和７月３－４日两桨相似的西南低涡东移,造成山东降水的范围和强度却悬殊柝大,分析发现,西南低涡影响山东产生天气差异的根本原因在于引导气流,物理机制和热力结构的不同,尤其是引导气流的差异,西南低涡的移向基本上沿引导气流方向,而其发展决定于高空冷却平流的强弱,给出了西南低涡造成了山东暴雨的天气概念模型,对今后预报此类暴雨提供了一些参考。     

河西内陆河春季流量变化特征的分析和预测

利用昌马、莺落峡、九条岭３个水文站四十余年的月平均流量资料,分析河西地区３条主要内陆河春季流量的长期变化特征,并用均生函数模型对流量进行了预报,为河西地区水资源的研究和利用提供参考依据     

全球大地热流-岩石生热率关系综合分析

大地热流分析是研究大地构造地球动力学和地壳化学组成的一个重要手段通过对全球范围大陆地区大地热流和岩石放射性生热率数据的综合统计分析探讨地壳一地慢热流配分统计结果揭示,全球尺度显生亩地质构造区热流与岩石生热率之间不存在简单的线性关系,但两者在隐生宙地盾区却具有明显正相关关系从大地热流-岩石生热率关系在显生亩地区和在隐生宙地区的差异可以大致确定壳-幔热流成分的变化范围取地壳厚度为30－50km,根据前寒武地盾区热流与生热率之间的统计关系可以进一步推测地壳岩石中放射性生热元素的平均丰度范围分别为铀（0．5-1．6）×10－6,钍（1．8－6．1）×10－6,氧化钾0．6％-1．9％．     

Velocity profiles and bed shear stress over various bed configurations in a river bend

Vertical velocity profiles measured over various bed configurations (plane beds, ripples, and dunes) in. the meandering River South Esk, Glen Clova, Scotland are presented on semilogarithmic paper. Local bed shear stress and roughness height are calculated from the lowermost parts of the profiles using the Karman-Prandtl law of the wall; these parameters, and the geometrical properties of the profiles, are related to the various bed configurations. A graphical model is used to identify profiles developed on specific regions of dune geometry, in order to discriminate those profiles that define bed shear effective in transporting sediment over dunes. An assessment is made of the errors involved in estimating local mean velocity from extrapolating the law of the wall to the water surface. A Darcy-Weisbach friction coefficient is related to bed configuration and local stream power.