太湖、洞庭湖野生青虾肌肉中有机氯农药的气相色谱-质谱法测定

使用气相色谱质谱技术测定了青虾肌肉组织中的8种有机氯农药.包括六氯苯、氯丹、滴滴涕(ΣDDTs)、艾氏剂、狄氏剂、异狄氏剂、七氯和灭蚁灵,对太湖和洞庭湖15个点位29组野士青虾样品的测定结果显示,青虾肌肉组织内残留的有机氯农药主要是六氯苯和滴滴涕,六氯苯含量为nd-13.2μg/kg(湿重),滴滴涕含量为0.790-5.82μg/kg(湿重),洞庭湖青虾肌肉中有机氯农药的含量略高于太湖青虾,两湖青虾肌肉残留有机氯农药在枯水期时的含量多数大于丰水期时的含量.     

煤层底板水害防治智能决策支持系统框架构建

煤层底板突水是华北型煤田煤矿生产过程中一种常见的水害类型,为解决水害防治工程的科学决策问题,进一步提高防治水工程的可靠性,提出构建智能决策支持系统的技术思路。智能决策支持系统是传统决策支持系统与人工智能技术相互融合的产物,在分析底板水害防治决策支持功能需求的基础上,提出“数据-模型-方案”一体化设计流程,从数据导入、模型驱动、智能决策等3个层次构建底板水害防治智能决策支持系统的基本框架。将模型驱动层进一步细分为方法库、模型库、知识图谱构建3项专业化服务,模型库包括底板突水空间点预测模型、疏水降压数值模拟模型、注浆改造工程可靠性分析模型、隔离工程设计模型及底板水害监测预警模型。系统最终输出的决策方案包括底板突水危险性分区、疏水降压Q-t-s方案、区域注浆改造设计及工程可靠性评价、隔离工程设计、底板突水监测预警警情发布。系统通过注浆过程的反馈-控制、突水监测预警的深度学习、疏水降压方案的动态优化等实现其智能决策。智能决策支持系统将会在煤层底板水害防治可靠性保障方面提供新的技术支撑。     

求解GM(1,1)模型新总体最小二乘算法

在GM(1,1)模型中系数矩阵和观测向量都是由原始序列组成的。系数矩阵中同样是有误差的,与观测向量中的误差一样,亦来源于原始序列,即它们误差同源。不同位置的相同元素应该有相同的改正数,采用传统总体最小二乘求解则不能达到此目的。针对这一缺陷,推导了一种新的总体最小二乘算法;并且通过算例验证了新方法的可行性和有效性。     

Flexible membranes anchored to the ground for slope stabilisation: Numerical modelling of soil slopes using SPH

An alternative modelling for flexible membranes anchored to the ground for soil slope stabilisation is presented using Smoothed-Particle Hydrodynamics to model the unstable ground mass in a soil slope, employing a dynamic solve engine. A regression model of pressure normal to the ground, q_sim, and also membrane deflection, f_sim, have been developed using Design of Experiment. Finally, a comparison between the pressure obtained from numerical simulation and from a limit equilibrium analysis considering infinite slope has been carried out, showing differences in the results, mainly due to the membrane stiffness.     

江苏一次锢囚状MCS和相关中涡旋MCV的观测分析

利用常规地面和高空气象观测资料,结合气象卫星云图和雷达回波,分析了2009年6月14日15—23时(北京时,下同),造成江苏强对流天气的一个中尺度对流系统(MCS)的锢囚状特征的形成过程及其垂直结构。地面中尺度分析表明,雷暴高压东侧在飑前倒槽北端发展的闭合低压环流的东南气流将暖湿空气输送到冷性雷暴高压的北侧形成东南一西北向的暖舌,从而形成锢囚状的结构。长三角探空网资料的垂直结构分析表明,在对流层下部地面到850 hPa为冷性的雷暴高压,在对流层中部700 hPa为冷性的α中尺度涡旋(MCV),而500 hPa已转变为暖性的MCV。静力学关系可以说明MCV仅仅存在于700~500 hPa的原因和MCS下冷上暖的热力结构密切相关。     

Investigation of a longfin inshore squid's swimming characteristics and an underwater locomotion during acceleration

In the present study, locomotion of a real longfin inshore squid (Doryteuthis pealeii) was numerically investigated. Geometry of a real squid was obtained using computed tomography (CT) images. In addition to a two-dimensional axisymmetric squid model, a modified squid model with no cavities around her head and an ellipse shaped model were generated with a fineness ratio (the ratio of body length to maximum body diameter) of 7.56. These numerical models were exposed to an acceleration with two different velocity programs. Added mass and basset forces on bodies were calculated during acceleration of the squid models starting from rest. Pressure and viscous drag forces were also calculated due to pressure variation along the squid models and friction on the surface of the models. The effect of a nozzle diameter on jet velocities and propulsive efficiency at all bodies were evaluated when time dependent velocity profiles (from 0 to 10 m/s in 0.5 and 1 s time durations) were set for the inlet of computational domain. The modified squid model required least thrust force during acceleration phase of time dependent velocity profile compared to the other models while the 0.02 m nozzle diameter provided largest propulsive efficiency for all models.     

Origin of the Breno and Esino dolomites in the western Southern Alps (Italy): Implications for a volcanic influence

The Esino Limestone of the western Southern Alps represents a differentiated Ladinian-Lower Carnian (?) carbonate platform comprised of margin, slope and peritidal inner platform facies up to 1000 m thick. A major regional subaerial exposure event lead to coverage by another peritidal Lower Carnian carbonate platform (Breno Formation). Multiphase dolomitization affected the carbonate sediments. Petrographic examinations identified at least three main generations of dolomites (D1, D2, and D3) that occur as both replacement and fracture-filling cements. These phases have crystal-size ranges of 3–35 μm (dolomicrite D1), 40–600 μm (eu-to subhedral crystals D2), and 200 μm to 5 mm (cavity- and fracture-filling anhedral to subhedral saddle dolomite D3), respectively.The fabric retentive near-micritic grain size coupled with low mean Sr concentration (76 ± 37 ppm) and estimated δ¹⁸O of the parent dolomitizing fluids of D1 suggest formation in shallow burial setting at temperature ∼ 45–50 °C with possible contributions from volcanic-related fluids (basinal fluids circulated in volcaniclastics or related to volcanic activity), which is consistent with its abnormally high Fe (4438 ± 4393 ppm) and Mn (1219 ± 1418 ppm) contents. The larger crystal sizes, homogenization temperatures (D2, 108 ± 9 °C; D3, 111 ± 14 °C) of primary two-phase fluid inclusions, and calculated salinity estimates (D2, 23 ± 2 eq wt% NaCl; D3, 20 ± 4 eq wt% NaCl) of D2 and D3 suggest that they formed at later stages under mid-to deeper burial settings at higher temperatures from dolomitizing fluids of higher salinity, which is supported by higher estimated δ¹⁸O values of their parent dolomitizing fluids. This is also consistent with their high Fe (4462 ± 4888 ppm; and 1091 ± 1183 ppm, respectively) and Mn (556 ± 289 ppm and 1091 ± 1183 ppm) contents, and low Sr concentrations (53 ± 31 ppm and 57 ± 24 ppm, respectively).The similarity in shale-normalized (SN) REE patterns and Ce (Ce/Ce*)_SN and La (Pr/Pr*)_SN anomalies of the investigated carbonates support the genetic relationship between the dolomite generations and their calcite precursor. Positive Eu anomalies, coupled with fluid-inclusion gas ratios (N₂/Ar, CO₂/CH₄, Ar/He), high F⁻ concentration, high F/Cl and high Cl/Br molar ratios suggest an origin from diagenetic fluids circulated through volcanic rocks, which is consistent with the co-occurrence of volcaniclastic lenses in the investigated sequence.     

Optimal routing for waste collection: a case study in Singapore

ABSTRACT

To collect and dispose growing amounts of municipal solid waste (MSW) changed to be a hot topic along with the rapid urbanization in past decades. Cities are more and more dependent on the incineration instead of landfilling due to the cost-efficiency and environmental concerns. Considering the limited number of incineration plants and complicated situation of transportation in both spatial and temporal dimensions in different cities, the optimal routing for waste collection turns to be meaningful research topic. In this research, the ant colony optimization (ACO)-based multi-objective routing model coupled with min-max model and Dijkstra’s algorithm is proposed to address the question of which route to take from these waste-generating points to the target incineration plant(s) considering travel time, accident probability (black spots), and population exposure, so as to support the routing decision-making. The model is successfully implemented in Singapore and the effectiveness of the model has also been justified. Besides, few limitations of this research have also been discussed, some of which would also be the future directions of our research, especially the design and integration of a web-based routing decision-making support system.     

高分辨率模式雷达回波预报能力分析

利用2018年7—8月GRAPES_3 km、东北短临(WRFRUC)高分辨率模式综合雷达回波预报数据和辽宁省SWAN雷达组合反射率(MCR)实况,基于邻域法FSS评分指数,分析模式在台风北上和副热带高压边缘暴雨过程中的雷达回波预报能力。结果表明:两家模式在不同降水过程中对小阈值雷达回波有较好的预报技巧,随着回波量级增大,模式预报FSS逐渐减小,雷达回波55 dBz时,FSS甚至为0。当邻域半径是3时,35 dBz以下的回波预报中GRAPES模式在台风北上暴雨中的预报技巧低于副热带高压边缘,35 dBz则相反。WRFRUC模式始终表现为台风北上暴雨中预报较好。当邻域半径9时,WRFRUC模式在台风暴雨中的FSS评分高于GRAPES模式,GRAPES模式在副热带高压暴雨中的FSS评分始终高于WRFRUC模式。GRAPES和WRFRUC模式的最大FSS评分技巧均出现在邻域半径是11时,分别为0.239和0.195。GRAPES模式中FSS评分在12 h逐小时预报中前3个时次较强,WRFRUC模式则表现为中间时次强,两头弱。     

GE VCT-高图像质量和低剂量的和谐

在本文中讨论了实现图像质量和X射线剂量的和谐和同一的重要性,介绍了GELightSpeedVCT在硬件,软件和临床应用上降低病人剂量的方法。VCT在实现各向同性高分辨率的同时努力提高X射线的有效利用率,降低病人剂量,真正实现了高图像质量和低剂量的和谐。