Deciphering late Devonian–early Carboniferous P–T–t path of mylonitized garnet-mica schists from Prins Karls Forland,Svalbard

Quartz-in-garnet inclusion barometry integrated with trace element thermometry and calculated phase relations is applied to mylonitized schists of the Pinkie unit cropping out on the island of Prins Karls Forland, western part of the Svalbard Archipelago. This approach combines conventional and novel techniques and allows deciphering of the pressure–temperature (P–T) evolution of mylonitic rocks, for which the P–T conditions could not have been easily deciphered using traditional methods. The results obtained suggest that rocks of the Pinkie unit were metamorphosed under amphibolite facies conditions at 8–10 kbar and 560–630°C and mylonitized at ~500 to 550°C and 9–11 kbar. The P–T results are coupled with in-situ Th–U-total Pb monazite dating, which records amphibolite facies metamorphism at c. 359–355 Ma. This is the very first evidence of late Devonian–early Carboniferous metamorphism in Svalbard and it implies that the Ellesmerian Orogeny on Svalbard was associated with metamorphism up to amphibolite facies conditions. Thus, it can be concluded that the Ellesmerian collision between the Franklinian margin of Laurentia and Pearya and Svalbard caused not only commonly accepted brittle deformation and weak greenschist facies metamorphism, but also a burial and deformation of rock complexes at much greater depths at elevated temperatures.     

Zircon U–Pb ages and Hf isotope compositions of migmatites from the North Qinling terrane and their geological implications

Migmatites are predominant in the North Qinling (NQ) orogen, but their formation ages are poorly constrained. This paper presents a combined study of cathodoluminescence imaging, U–Pb age, trace element and Hf isotopes of zircon in migmatites from the NQ unit. In the migmatites, most zircon grains occur as new, homogeneous crystals, while some are present as overgrowth rims around inherited cores. Morphological and trace element features suggest that the zircon crystals are metamorphic and formed during partial melting. The inherited cores have oscillatory zoning and yield U–Pb ages of c. 900 Ma, representing their protolith ages. The early Neoproterozoic protoliths probably formed in an active continental margin, being a response to the assembly of the supercontinent Rodinia. The migmatite zircon yields Hf model ages of 1911 ± 20 to 990 ± 22 Ma, indicating that the protoliths were derived from reworking of Palaeoproterozoic to Neoproterozoic crustal materials. The anatexis zircon yields formation ages ranging from 455 ± 5 to 420 ± 4 Ma, with a peak at c. 435 Ma. Combined with previous results, we suggest that the migmatization of the NQ terrane occurred at c. 455–400 Ma. The migmatization was c. 50 Ma later than the c. 490 Ma ultra‐high‐P (UHP) metamorphism, indicating that they occurred in two independent tectonic events. By contrast, the migmatization was coeval with the granulite facies metamorphism and the granitic magmatism in the NQ unit, which collectively argue for their formation due to the northward subduction of the Shangdan Ocean. UHP rocks were distributed mainly along the northern margin and occasionally in the inner part of the NQ unit, indicating that they were exhumed along the northern edge and detached from the basement by the subsequent migmatization process.     

Understory and small trees contribute importantly to stemflow of a lower montane cloud forest

Stemflow (Sf) measurements in tropical rain and montane forests dominated by large trees rarely include the understory and small trees. In this study, contributions of lower (1‐ to 2‐m height) and upper (>2‐m height and <5‐cm diameter at breast height [DBH]) woody understory, small trees (5 < DBH < 10 cm), and canopy trees (>10‐cm DBH) to Sf per unit ground area (Sf_a) of a Mexican lower montane cloud forest were quantified for 32 days with rainfall (P) during the 2014 wet season. Rainfall, stemflow yield (Sf_y), vegetation height, density, and basal area were measured. Subsequently, stemflow funneling ratios (SFRs) were calculated, and three common methods to scale up Sf_y from individual trees to the stand level (tree‐Sf_y correlation, P‐Sf_y correlation, and mean‐Sf_y extrapolation) were used to calculate Sf_a. Understory woody plants, small trees, and upper canopy trees represented 96%, 2%, and 2%, respectively, of the total density. Upper canopy trees had the lowest SFRs (1.6 ± 0.5 Standard Error (SE) on average), although the lower understory had the highest (36.1 ± 6.4). Small trees and upper understory presented similar SFRs (22.9 ± 5.4 and 20.2 ± 3.9, respectively). Different Sf scaling methods generally yielded similar results. Overall Sf_a during the study period was 22.7 mm (4.5% of rainfall), to which the understory contributed 70.1% (15.9 mm), small trees 10.6% (2.4 mm), and upper canopy trees 19.3% (4.4 mm). Our results strongly suggest that for humid tropical forests with dense understory of woody plants and small trees, Sf of these groups should be measured to avoid an underestimation of overall Sf at the stand level.     

Introducing a new conceptual instantaneous unit hydrograph model based on a hydraulic approach

ABSTRACT

A novel approach is introduced for simulation of instantaneous unit hydrographs (IUHs). The model consists of a series of linear reservoirs that are connected to each other, and is referred to as the inter-connected linear reservoir model (ICLRM). By assuming the flow between two reservoirs is a linear function of the difference between the water levels in the reservoirs, a system of first-order linear differential equations is obtained as the ICLRM governing equation. By solving the equations, the discharge from the last reservoir is considered as an IUH. A small-scale laboratory device was constructed for the simulation of IUHs using the model. By studying four hydrographs extracted from the literature, and simulating them using both the ICLRM and the Nash model, it is concluded that the ICLRM can predict these hydrographs more accurately than the Nash model. Due to the simplicity of the construction and operation of the ICLRM and, more importantly, its visual aspect, the ICLRM may be considered as an effective educational tool for studying IUHs.     

断代成矿单元研究划分 ----以陕西省成矿单元划分为例

随着地质找矿难度的日益加大,如何科学地圈定找矿靶区,已成为新时期矿产勘查部署及实现找矿突破的关键。成矿单元划分是区域成矿规律研究的基础性工作,在圈定找矿靶区、部署矿产勘查工作中起着重要作用。目前国内成矿单元划分的主要方法是以区域内成矿作用最强、矿床最多的构造旋回所形成的地质构造单元为基础,同时考虑其它构造旋回形成的矿床分布状况而进行成矿单元划分,即采用综合方法划分成矿单元（陈毓川等,2007.徐志刚等,2008.）。对于仅发育单一构造演化阶段或多数矿床形成于某一主要构造阶段的区域而言,上述划分思路和方案基本反映了成矿地质背景及矿产分布规律。但对于发育多个构造演化阶段或多旋回造山带的区域（如陕西省）而言,其矿产众多且形成于多个构造演化阶段,综合方法所划分的成矿区带则较难客观、清晰地反映其成矿背景及矿产分布规律。陕西省多年来的矿产勘查实践表明,成矿单元的划分应从本省多旋回构造演化、多阶段成矿作用的实际出发开展断代成矿单元划分,从而清晰地反映各构造演化阶段的成矿特征及矿床分布规律,以满足新时期地质找矿工作的需求。     

基于GeoSOT剖分编码的不动产单元统一标识模型研究

针对现有不动产单元编码存在空间位置信息模糊的问题,以寻求更加直接反映空间位置的不动产编码为目标,在对现有不动产单元编码深入研究的基础上,提出了基于GeoSOT网格编码的不动产单元模型、编码方法,以及该模型与空间位置信息转换方案。试验证明,基于GeoSOT的不动产单元编码更加直观,具有很好的实用性。     

边坡单元的SAR数据特征

针对传统D-InSAR技术以栅格单元为研究对象而无法充分反映地形条件的问题,该文提出了以边坡单位为研究对象的D-InSAR数据特征分析。通过基于边坡单元的区域地形因子与后向散射系数和相干系数关系的分析方法,建立了研究区域SAR数据的可信区域滤波方法,提取出了研究区域SAR数据分析结果的可信区域。该方法提高了SAR数据的有效性,为滑坡早期监测提供了可靠的数据基础。通过对金沙江乌东德区域的SAR数据实例分析,验证了该方法的实用性。     

中心内缩综合元的水深自动综合模型

针对水深自动综合问题,该文在满足水深综合的特殊要求并保持综合前后水深分布空间一致性的基础上,利用Voronoi图工具,采用定性和定量分析方法,建立了相应的综合规则和控制流程,设计了一种中心内缩综合元的水深自动综合模型,并进行了实验验证。实验结果表明,该模型可以在保证水深综合质量的前提下,实现流程的自动化。     

Driving forces and their interactions of built-up land expansion based on the geographical detector – a case study of Beijing,China

Scientific interpretation of the driving forces of built-up land expansion is essential to urban planning and policy-making. In general, built-up land expansion results from the interactions of different factors, and thus, understanding the combined impacts of built-up land expansion is beneficial. However, previous studies have primarily been concerned with the separate effect of each driver, rather than the interactions between the drivers. Using the built-up land expansion in Beijing from 2000 to 2010 as a study case, this research aims to fill this gap. A spatial statistical method, named the geographical detector, was used to investigate the effects of physical and socioeconomic factors. The effects of policy factors were also explored using physical and socioeconomic factors as proxies. The results showed that the modifiable areal unit problem existed in the geographical detector, and 4000 m might be the optimal scale for the classification performed in this study. At this scale, the interactions between most factors enhanced each other, which indicated that the interactions had greater effects on the built-up land expansion than any single factor. In addition, two pairs of nonlinear enhancement, the greatest enhancement type, were found between the distance to rivers and two socioeconomic factors: the total investment in fixed assets and GDP. Moreover, it was found that the urban plans, environmental protection policies and major events had a great impact on built-up land expansion. The findings of this study verify that the geographical detector is applicable in analysing the driving forces of built-up land expansion. This study also offers a new perspective in researching the interactions between different drivers.     

中国航磁大地构造单元划分

本文以我国截止到2011年基本覆盖陆域及部分海域的航磁数据编制的全国航磁系列图为基础,以航磁反映的区域磁场和磁性基底起伏特征为依据,汲取主流大地构造观的划分理念,以板块构造理论及大陆动力学思想为指导,以磁场反映的构造特征为切入点,结合重力、遥感、地质资料对中国陆域构造单元进行划分。大地构造单元划分4个级别:一级构造单元为陆块区和造山系,共划分出8个;二级构造单元为陆块、弧盆系和地块,共划分出32个;三级构造单元为盆地、坳陷带(区)和隆起带(区),共划分出85个;四级构造单元为隆起和坳陷,共划分出332个。本划分方案旨在为油气地质构造背景研究及油气勘探提供一份地球物理资料。文中重点讨论了一、二级构造单元界线厘定的磁场依据及与前人划分存在的不同之处,而三、四级构造单元完全依据磁场及磁性基底起伏情况进行划分,并在盆地和坳陷区给出了深度信息,这为油气勘探者提供了必要的技术支撑。同时,借助丰富的航磁信息提示出一些地质构造方面难解现象,供同行专家参考与讨论。