既有房屋饱和土地基极限承载力增长的探讨

饱和土地基在既有房屋长期荷载作用下,地基土强度参数值随着地基土的排水固结和压密而提高,地基极限承载力也同时增大,如何估算此提高值而挖掘其潜力,传统方法只是借助于统计回归讨论了设计承载力。本文从土力学基本原理出发,借助Prandtl假定,对既有房屋饱和土地基极限承载力的增长进行了探讨。     

秦岭造山带地壳构造与楔入成山

横穿秦岭的河南叶县至湖北南漳的反射地震剖面揭示，秦岭造山带地壳由一系列由南向北楔入到中地壳的鳄鱼式构造所组成。南北溱岭上地壳分别形成南秦岭和北秦岭推覆系。北秦岭推覆系是组成基底的地壳沿脆转换面拆离冲叠形成的一个推覆系，可以分出栾川推覆体，瓦穴子推覆体，二郎坪推覆体及朱夏推覆体。     

钻孔扩底灌注桩施工新工艺

本文介绍钻孔扩底灌注桩的施工新工艺，多应式扩底钻头特点，成桩技术标准，适用范围及经济效益分析。     

建筑结构抗震能力评估技术的研究及应用

简要介绍影响建筑结构抗震能力的主要因素，重点评述目前建筑结构抗震能力评估的主要技术方法并指出其存在的问题，展望今后抗震能力评估技术的应用及发展趋势。     

A modal pushover analysis procedure to estimate seismic demands for unsymmetric‐plan buildings

An Erratum has been published for this article in Earthquake Engng. Struct. Dyn. 2004; 33:1429. Based on structural dynamics theory, the modal pushover analysis (MPA) procedure retains the conceptual simplicity of current procedures with invariant force distribution, now common in structural engineering practice. The MPA procedure for estimating seismic demands is extended to unsymmetric‐plan buildings. In the MPA procedure, the seismic demand due to individual terms in the modal expansion of the effective earthquake forces is determined by non‐linear static analysis using the inertia force distribution for each mode, which for unsymmetric buildings includes two lateral forces and torque at each floor level. These ‘modal’ demands due to the first few terms of the modal expansion are then combined by the CQC rule to obtain an estimate of the total seismic demand for inelastic systems. When applied to elastic systems, the MPA procedure is equivalent to standard response spectrum analysis (RSA). The MPA estimates of seismic demand for torsionally‐stiff and torsionally‐flexible unsymmetric systems are shown to be similarly accurate as they are for the symmetric building; however, the results deteriorate for a torsionally‐similarly‐stiff unsymmetric‐plan system and the ground motion considered because (a) elastic modes are strongly coupled, and (b) roof displacement is underestimated by the CQC modal combination rule (which would also limit accuracy of RSA for linearly elastic systems). Copyright © 2004 John Wiley & Sons, Ltd.     

A Model-Based Approach to Semi-Automated Reconstruction of Buildings from Aerial Images

Automated reconstruction of building objects from aerial images is a complex problem due to the diversity of buildings as well as noise and low contrast of images, which are the results of distant photography, atmospheric effects and poor illumination. In this paper, a semi-automated approach to the reconstruction of parametric building models from aerial images is presented, which works with line segments extracted from the image. The model is selected interactively from a library of parametric models. A perceptual grouping technique is used to select the most significant image lines in terms of relations such as proximity and parallelism. Model lines are searched for the same relations as in the grouped image lines, and the corresponding lines undergo a matching procedure, which determines whether or not a match can be found between the given model and image lines. An experiment with aerial images of flat-roof and gable-roof buildings is shown and its results indicate the robustness and efficiency of the proposed approach.     

2003年12月1日新疆昭苏6.1级地震烈度与房屋震害

介绍了2003年12月1日新疆昭苏6.1级地震的现场考察结果.该地震宏观震中位于受灾最重的兵团农四师76团11连西侧,极震区烈度为Ⅷ度;圈定出Ⅷ度、Ⅶ度和Ⅵ度3条等震线.此次考察还着重考察了震区各类典型建筑的受损特征,对受损原因作了初步分析,所取得的经验可供类似地区抗震设防和民房改造工作参考.     

Identification of structural parameters of multistorey shear buildings from modal data

A procedure has been presented in this paper to identify the structural parameters, viz. mass and stiffness matrices, from modal test data for multistorey shear buildings. The first two orders of modal data have been used by other researchers to estimate the global matrices where they depend only on measurable points which are less than the total number of structural degrees of freedom. The above method has been refined here by using Holzer criteria along with other numerical methods to estimate the global mass and stiffness matrices of the structure. This shows the methodology to be more efficient and accurate. The reliability of the procedure has been shown by examples of multistorey buildings. Copyright © 2004 John Wiley & Sons, Ltd.     

建筑变形测量成果质量检验问题分析

近几年,全国开展了多次变形测量成果质量检验工作且效果显著.本文首先简要介绍了全国建筑变形测量成果质量检验工作相关内容,其次结合全国33个建筑变形测量成果受检项目中出现的较严重的质量问题,从成果类型、质量元素、典型问题3个方面对成果质量情况进行分析,最后根据分析结论与检验情况为建筑变形测量成果在生产中的质量控制及质量检验...