基于VRMap平台上的电子沙盘研制

通过与国内外数字沙盘制作方式及功能的比较，详细介绍了数字沙盘研究方面的一些方法，并以中原油田数字沙盘的研制为例，选择北京灵图公司的VRMap2．3软件作为平台制作中原油田数字沙盘，为油田开发提供基本资料。     

风沙起电的风洞实验研究

利用大型风沙物理风洞实验装置 ,模拟铺沙地面在不同风速条件下对不同粒径的沙样和混合沙的起电电场、电位和荷质比作实验测量。结果表明 :存在风沙起电效应。风洞内电场多为负极性 ,最大电场达到 - 2 9kV·m- 1 ,导线电位可达 12 0mV。沙粒越细 ,起电越强 ,且随风速增加而增大     

Wind and Wave Data Analysis for the Aegean Sea - Preliminary Results

In this paper, a statistical analysis on wind and wave buoy measurements and wind and wave model forecasts obtained during a two-year period (1999-2001) is presented with reference to four characteristic near-shore sites of the Aegean Sea. The measurements are a main product of the "POSEIDON" system aiming at the monitoring and forecasting of the state of the Greek seas, operated by the National Centre for Marine Research (NCMR). Although the two-year period is rather short for a thorough analysis of the local wind and wave climate, yet the obtained results, presented herein for the first time, reveal some interesting features of the corresponding wave and wind characteristics. Comparisons between the measurements and the forecast results are also performed at the locations under consideration. It is found that (i) wind speeds obtained from the POSEIDON weather forecasting system are, in general, in agreement with the measurements, except for high wind speeds which are systematically underestimated, (ii) the WAM model can successfully follow the monthly and over year trend of the evolution of wind and wave characteristics, but face significant problems for efficient sea-state forecasting. Finally, the overall pattern of the wind/wave climate for the entire Aegean Sea as obtained from the models is presented by means of the spatial distribution of the mean annual wind and sea-state intensity.     

Near-Wall Flow Development After A Step Change In Surface Roughness

An experimental study of the initial flow field downstream of a step change in surface roughness is presented. The roughness length of the downstream surface was approximately tenfold that of the upstream roughness and, unlike all previous studies, attention was concentrated on the roughness sublayer region beneath the inertial (log-law) region. The experiments were conducted at a boundary layer Reynolds number of about 6 × 10⁴ (based on layer thickness andfree-stream velocity) and around a longitudinal location where the (downstream) roughness length, z_o2, was about 1% of the boundary-layer thickness atthe roughness change point.The thickness of the roughness sublayer was found for the two roughness. It was observed that the vertical profiles of mean velocity and turbulence characteristics started to show similarity after about 160z₀₂ downstream of the roughness change. The presence of a shear stress overshoot is shown to depend strongly on the precise location (with respect to the roughness elements) at which the measurements are made and the thickness of the equilibrium layer is shown to be very sensitive to the way it is defined. It is demonstrated that the growing equilibrium layer has first to encompass the roughness sublayer before any thickness of inertial sublayer can be developed. It follows that, in somepractical cases, like flows across some urban environments, the latter(log-law) region may never exist at all.     

Optimal design of passive energy dissipation systems based on H∞ and H2 performances

Passive energy dissipation devices (EDDs), such as viscous dampers, viscoelastic dampers, etc., have been used to effectively reduce the dynamic response of civil infrastructures, such as buildings and bridges, subject to earthquakes and strong winds. The design of these passive energy dissipation devices (EDDs) involves the determination of the optimal locations and the corresponding capacities. In this paper, we present two optimal design methodologies for passive EDDs based on active control theories, including H_∞ and H₂ performances, respectively. The optimal design methodologies presented are capable of determining the optimal locations and the corresponding capacities of EDDs. Emphasis is placed on the application of linear matrix inequality (LMI) for the effective design of passive EDDs using the popular MATLAB toolboxes. One important advantage of the proposed approaches is that the computation of the structural response is not needed in the design process. The proposed optimal design methodologies have been applied to: (i) a 10‐storey building and a 24‐storey building both subject to earthquake excitations, and (ii) a 76‐storey wind‐excited benchmark building, to demonstrate the advantages of the proposed design methodologies over the conventional equal capacity design. Copyright © 2002 John Wiley & Sons, Ltd.     

Slump-initiated and controlled syndepositional sandstone remobilization: an example from the Namurian of County Clare, Ireland

Remobilization of sandstones can dramatically reconfigure original depositional geometries and results in very unusually shaped sandstones, which resemble little, if any, of the original geometry. A number of deformational sandstone bodies, dykes and volcanoes from the upper part of the Carboniferous Ross Formation are described, which offer the opportunity to examine a suite of field-scale reconfigured sandstones. These structures are located in close proximity to the Ross Slide, which outcrops along a 2-km section on the northern coast of the Loop Head Peninsula, County Clare, Ireland. Dome- and ridge-shaped deformational sandstone bodies, dykes and volcanoes are interpreted to be the product of remobilization of a turbiditic sandstone. Liquification and remobilization were triggered by translation, cessation and loading of the underlying turbiditic sandstone by the Ross Slide. Deformational sand body, dyke and volcano development occurred in an asynchronous fashion with deformational sand bodies formed during slump translation. Sand dykes and volcanoes developed after the cessation of slump movement. During slump translation, the minimum principal stress (σ₃) was orientated vertically and the slump behaved in a `ductile' manner. After slump arrest, the minimum principal stress was oriented horizontally, and the unit regained shear strength to behave in a `brittle' manner. The relative change in rheological states with changing applied shear stress is indicative of thixotropic-like behaviour within the slump mass. Ridge-shaped deformational sand bodies are aligned parallel to slump folds, and their morphology is inferred to be controlled by compressional slump deformation associated with heterogeneous cessation of slump movement that was initiated by frontal arrest of the translating mass.     

南向行星际磁场事件与磁暴关系的研究

利用172-182年IMP-8飞船的太阳风观测资料和相应地磁活动性指数Dst和AE,研究了43个南向行星际磁场事件期间太阳风和磁层的耦合问题. 与这43个事件对应的地磁暴是中等的和强的磁暴(Dst＜-50nT). 结果表明:(1) 在43个事件中有11个(约占25.6髎)紧随激波之后,18个处于激波下游流场中(占42髎),其余14个(占33髎)和激波没有关连. 绝大多数事件都伴有太阳风动压和总磁场强度的增加;(2) 当行星际晨昏向电场强度EI＞-4mV/m时,只引起磁亚暴,对Dst指数没有明显影响. 仅当EI＜-5mV/m时,磁亚暴和磁暴才会同时出现;(3) 太阳风动压的增加会增强能量向环电流的输入,但不是密度和速度单独起作用,而是以PK=ρV2的组合形式影响能量的输入;(4) 虽然行星际磁场(IMF)南向分量BZ对太阳风和磁层的耦合起着关键作用,但IMF的BX和BY分量相对于BZ的大小对太阳风向磁层的能量传输也有一定影响. 当BX、BY相对BZ较大时能量耦合加强.     

三种被动式积沙仪积沙效率的野外实验研究

积沙仪积沙效率的高低直接影响近地表输沙率的测定，从而影响着风沙地貌的研究和风沙工程设计，对目前三种常用积沙仪在相同条件下（同一下垫面、相同风速）的积沙进行了野外观测。结果表明：（1）相同条件下，楔形积沙仪积沙量远远大于其它两种；（2）近地面积沙量随高度分布上，楔形积沙仪能更好地反映风沙流结构；（3）与其它两种积沙仪相比，楔形积沙仪所采集沙子中的小粒径颗粒含量明显多于其它两种积沙仪结果，而较大粒径颗粒的含量呈相反趋势，造成这些差异的原因在于楔形积沙仪采用的流线型构造和网状结构，从而对风沙流的阻挡程度较小，今后应推广楔形积沙仪的使用。     

深埋长隧道有害气体发生的地质条件初探

有害气体的深埋长隧道的主要地质灾害现象之一。本文在现场调查及查阅国内外文献资料基础上，探讨了有害气体发生的地质条件，为有害气体地质灾害的预测提供了依据。     

沙坡头人工植被固沙区天然降水的入渗和分配研究

土壤、植被冠层与大气界面间(SVAT)物质传输过程日益成为水文学研究最感兴趣的领域,降水量的迁移与转换是非灌溉区SVAT主要的物质传输过程.干旱半干旱区稀疏灌丛蒸散量占降水量的90%以上,因此对降水入渗与水分在土壤内植物根际区再分配的研究显得十分重要.试验于2001年8月17日至9月30日在中国科学院沙坡头试验站进行,主要观测人工植被荒漠灌木柠条(Caragana korshinskii) 灌丛固定沙丘降水入渗与再分配过程.结果表明:在7次不连续降水过程中,土壤入渗深度与降水强度呈简单线性相关关系,土壤入渗速率约为降水强度的10倍.当次降水过程中降水强度小于0.46 mmh-1时,土壤入渗速率约为0 cm*h-1,此时的降水对沙区土壤基本上没有水分补给作用.受荒漠灌木柠条根系吸水作用的影响,其根系密集剖面深度40～140 cm内降水水分入渗积累不明显.降水入渗速率及入渗深度受土壤剖面初始含水率多寡而变化,干燥土壤剖面有助于提高瞬时入渗速率.降水以后随着时间的推移,人工固沙区微环境内空气温度、湿度等气象条件适宜,柠条生长进入相对旺盛阶段,其根系密集层140 cm深度处土壤含水率在总体上下降的过程中,表现出昼消夜长的趋势,试验期间翌日 8:00时土壤含水率值略高于前一日20:00时水分值 0.1%～0.3%.